EN ISO 283:2023
(Main)Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023)
Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023)
This document specifies a test method for the determination of the full thickness tensile strength in the longitudinal direction and the elongation at the reference force and breaking point of conveyor belts having a textile carcass. The method can also be used for the determination of full thickness tensile strength in the transverse direction and the elongation at the breaking point, for use when the manufacturer is requested by the purchaser to state values for these properties.
This document does not apply to light conveyor belts as described in ISO 21183‑1.
Textilfördergurte - Zugfestigkeit bei voller Gurtdicke, Bruchdehnung und Dehnung bei Bezugslast - Prüfverfahren (ISO 283:2023)
Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Zugfestigkeit bei voller Gurtdicke in Längsrichtung und der Dehnung bei Bezugskraft und der Bruchstelle von Fördergurten mit einer Textilkarkasse fest. Außerdem legt sie ein Verfahren zur Bestimmung der Zugfestigkeit bei voller Gurtdicke in Querrichtung und die Bruchdehnung fest, für den Fall, dass der Käufer den Hersteller auffordert, Werte für den Gebrauch vorzulegen.
Dieses Dokument ist nicht anwendbar auf die in ISO 21183 1 beschriebenen leichten Fördergurte.
Courroies transporteuses à carcasse textile - Résistance à la traction, allongement à la rupture et allongement sous force de référence en pleine épaisseur - Méthode d'essai (ISO 283:2023)
Le présent document spécifie une méthode d’essai pour la détermination de la résistance à la traction dans le sens longitudinal et l’allongement sous force de référence et au point de rupture des courroies transporteuses à carcasse textile en pleine épaisseur. La méthode peut également être utilisée pour la détermination de la résistance à la traction dans le sens transversal et de l’allongement au point de rupture en pleine épaisseur, pour une utilisation lorsque l’acheteur demande au fabricant de déclarer les valeurs de ces propriétés.
Le présent document n’est pas applicable pour les courroies transporteuses légères décrites dans l’ISO 21183‑1.
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Natezna trdnost pri polni debelini traku, raztezek pri porušitvi in raztezek pri referenčni sili - Preskusna metoda (ISO 283:2023)
Standard ISO 283:2015 določa metodo preskušanja za določanje natezne trdnosti pri polni debelini po vzdolžni osi in raztezka pri referenčni sili ter točke preloma trakov tračnih transporterjev s trupom iz tekstila. To metodo je mogoče uporabiti tudi za določanje natezne moči pri polni debelini v transverzalni smeri ter raztezka pri točki preloma, za uporabo v primerih, kjer kupec od proizvajalca zahteva navedbe vrednosti za te lastnosti.
Standard ISO 283:2015 se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev, opisane v standardu ISO 21183-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2023
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Natezna trdnost
pri polni debelini traku, raztezek pri porušitvi in raztezek pri referenčni sili -
Preskusna metoda (ISO 283:2023)
Textile conveyor belts - Full thickness tensile strength, elongation at break and
elongation at the reference load - Test method (ISO 283:2023)
Textilfördergurte – Zugfestigkeit bei voller Gurtdicke, Bruchdehnung und Dehnung bei
breitenbezogener Bruchkraft – Prüfverfahren (ISO 283:2023)
Courroies transporteuses à carcasse textile - Résistance à la traction, allongement à la
rupture et allongement sous force de référence en pleine épaisseur - Méthode d'essai
(ISO 283:2023)
Ta slovenski standard je istoveten z: EN ISO 283:2023
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 283
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 53.040.20 Supersedes EN ISO 283:2015
English Version
Textile conveyor belts - Full thickness tensile strength,
elongation at break and elongation at the reference load -
Test method (ISO 283:2023)
Courroies transporteuses à carcasse textile - Textilfördergurte - Zugfestigkeit bei voller Gurtdicke,
Résistance à la traction, allongement à la rupture et Bruchdehnung und Dehnung bei breitenbezogener
allongement sous force de référence en pleine Bruchkraft - Prüfverfahren (ISO 283:2023)
épaisseur - Méthode d'essai (ISO 283:2023)
This European Standard was approved by CEN on 1 March 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 283:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 283:2023) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2023, and conflicting national standards shall
be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 283:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 283:2023 has been approved by CEN as EN ISO 283:2023 without any modification.
INTERNATIONAL ISO
STANDARD 283
Fifth edition
2023-03
Textile conveyor belts — Full thickness
tensile strength, elongation at break
and elongation at the reference load
— Test method
Courroies transporteuses à carcasse textile — Résistance à la traction,
allongement à la rupture et allongement sous force de référence en
pleine épaisseur — Méthode d'essai
Reference number
ISO 283:2023(E)
ISO 283:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 283:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test pieces .3
6.1 Shape and dimensions . 3
6.2 Method of selection of test pieces . 3
6.3 Preparation of test pieces . 7
6.4 Number of test pieces . 7
6.5 Conditioning of test pieces . 8
7 Procedure .8
8 Calculation and expression of results . 8
8.1 Tensile strength . 8
8.2 Elongation . 8
8.2.1 Elongation at break . 8
8.2.2 Elongation at reference force (see 3.5) . 9
9 Test report . 9
Bibliography .10
iii
ISO 283:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/TC 188, Conveyor belts, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This fifth edition cancels and replaces the fourth edition (ISO 283:2015), which has been technically
revised.
The main changes are as follows:
— addition of conditioning period requirement before being sampled in 6.1;
— clarification of sample width measuring point in 6.3;
— addition of cover reduction requirement in the grip areas in 6.3;
— deletion of the humidity requirement in 6.5.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
INTERNATIONAL STANDARD ISO 283:2023(E)
Textile conveyor belts — Full thickness tensile strength,
elongation at break and elongation at the reference load —
Test method
1 Scope
This document specifies a test method for the determination of the full thickness tensile strength in
the longitudinal direction and the elongation at the reference force and breaking point of conveyor
belts having a textile carcass. The method can also be used for the determination of full thickness
tensile strength in the transverse direction and the elongation at the breaking point, for use when the
manufacturer is requested by the purchaser to state values for these properties.
This document does not apply to light conveyor belts as described in ISO 21183-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7500-1, Met
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.