iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 6802:2008

(Main)

Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)

Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)

ISO 6802:2005 describes a pressure impulse test with flexing for wire-reinforced rubber and plastics hydraulic hoses and hose assemblies.
The test is applicable to high-pressure hydraulic hoses and hose assemblies, which are subject to pulsating pressure in service.
This International Standard describes two methods of flexing the hose or hose assembly. The actual pressure impulse test is described in ISO 6803.

Gummi- und Kunststoffschläuche und Schlauchleitungen mit Drahtgeflechteinlage - Hydraulik-Impulsprüfung mit wechselnder Biegung (ISO 6802:2005)

Diese Internationale Norm stellt eine Druckimpulsprüfung mit wechselnder Biegung für drahtverstärkte Gummi- und Kunststoffschläuche und schlauchleitungen auf.
Die Prüfung gilt für Hochdruckschläuche und -schlauchleitungen, die während des Betriebs pulsierendem Druck ausgesetzt sind.
Diese Internationale Norm beschreibt zwei Verfahren mit wechselnder Biegung des Schlauches oder der Schlauchleitung. Die tatsächliche Druckimpulsprüfung ist in ISO 6803 beschrieben.

Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques - Essai d'impulsions hydrauliques avec flexions (ISO 6802:2005)

L'ISO 6802:2005 décrit un essai d'impulsions avec flexions pour les tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques.
L'essai est applicable aux tuyaux et flexibles hydrauliques haute pression qui sont soumis à des pressions pulsatoires en service.
L'ISO 6802:2005 décrit deux méthodes de flexion du tuyau ou du flexible. L'essai d'impulsions de pression réel est décrit dans l'ISO 6803.

Gumene in polimerne cevi ter cevni priključki, ojačani z jeklenim kordom - Hidravlično sunkovno preskušanje z upogibanjem (ISO 6802:2005)

General Information

Status
Withdrawn
Publication Date
25-Nov-2008
Withdrawal Date
23-Oct-2018
ICS
23.040.70 - Hoses and hose assemblies
23.100.40 - Piping and couplings
Technical Committee
CEN/TC 218 - Rubber and plastics hoses and hose assemblies
Drafting Committee
CEN/TC 218 - Rubber and plastics hoses and hose assemblies
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
24-Oct-2018
Ref Project
SIST EN ISO 6802:2009 - Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005)

Relations

Replaces
EN 26802:1993 - Rubber and plastics hose and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing (ISO 6802:1991)
Effective Date
22-Dec-2008
Replaced By
EN ISO 6802:2018 - Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
Effective Date
27-Nov-2013

Buy Standard

EN ISO 6802:2009EN ISO 6802:2009
PreviousNext
Standard
EN ISO 6802:2009
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6802:2009
01-maj-2009
1DGRPHãþD
SIST EN 26802:2000
*XPHQHLQSROLPHUQHFHYLWHUFHYQLSULNOMXþNLRMDþDQL]MHNOHQLPNRUGRP
+LGUDYOLþQRVXQNRYQRSUHVNXãDQMH]XSRJLEDQMHP ,62
Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic
impulse test with flexing (ISO 6802:2005)
Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques -
Essai d'impulsions hydrauliques avec flexions (ISO 6802:2005)
Ta slovenski standard je istoveten z: EN ISO 6802:2008
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 6802:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6802:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 6802:2009
EUROPEAN STANDARD
EN ISO 6802
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 23.040.70 Supersedes EN 26802:1993
English Version
Rubber and plastics hoses and hose assemblies with wire
reinforcements - Hydraulic impulse test with flexing (ISO
6802:2005)
Tuyaux et flexibles en caoutchouc et en plastique renforcés
par des fils métalliques - Essai d'impulsions hydrauliques
avec flexions (ISO 6802:2005)
This European Standard was approved by CEN on 29 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6802:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6802:2009
EN ISO 6802:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6802:2009
EN ISO 6802:2008 (E)
Foreword
The text of ISO 6802:2005 has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber
products” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
6802:2008 by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the
latest by May 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 26802:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 6802:2005 has been approved by CEN as a EN ISO 6802:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 6802:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 6802:2009


INTERNATIONAL ISO
STANDARD 6802
Third edition
2005-10-01

Rubber and plastics hoses and hose
assemblies with wire reinforcements —
Hydraulic impulse test with flexing
Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils
métalliques — Essai d'impulsions hydrauliques avec flexions


...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6802:2018(Main)
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
SIST EN ISO 6802:2019

This document describes hose impulse testing, with flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.
NOTE       Impulse test procedures without flexing can be found in ISO 6803.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6803:2017(Main)
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
SIST EN ISO 6803:2017

ISO 6803:2017 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.
NOTE          Impulse test procedures with flexing can be found in ISO 6802.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 853:2015(Main)
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
SIST EN 853:2015

This European Standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. They are suitable for use with:
-   hydraulic fluids in accordance with ISO 6743 4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 °C to +100 °C;
-   water based fluids at temperatures ranging from -40 °C to +70 °C;
-   water at temperatures ranging from 0 °C to +70 °C.
This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE 1   The hoses are not suitable for use with castor oil based and ester based fluids.
NOTE 2   Hoses and hose assemblies are not be operated outside the limits of this standard.
NOTE 3   Requirements for hydraulic hoses for underground mining are standardized in separate standards.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 854:2015(Main)
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
SIST EN 854:2015

This European Standard specifies requirements for three types of textile reinforced rubber hoses and hose assemblies of nominal bore from 5 to 100. The types are defined in Clause 3.
They are suitable for use with:
-   hydraulic fluids in accordance with ISO 6743 4 with the exception of HRD R, HFD S and HFD at temperatures ranging from -40 °C to 100 °C;
-   water-based fluids at temperatures ranging from -40 °C to +70 °C;
-   water at temperature ranging from 0 °C to +70 °C.
The European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE 1   The hoses are not suitable for use with castor oil based and ester based fluids.
NOTE 2   Hoses and hose assemblies are not be operated outside the limits of this standard.
NOTE 3   Requirements for hydraulic hoses for underground mining are standardized in separate standards.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 857:2015(Main)
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
SIST EN 857:2015

This European Standard specifies requirements for two types of wire braid reinforced compact hoses and hose assemblies of nominal bore from 6 to 25, types 1SC and 2SC.
They are suitable for use with:
-   hydraulic fluids in accordance with ISO 6743 4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 °C to +100 °C;
-   water based fluids at temperatures ranging from -40 °C to +70 °C;
-   water at temperatures ranging from 0 °C to +70 °C.
This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE 1   The hoses are not suitable for use with castor oil based nor ester based fluids.
NOTE 2   Hoses and hose assemblies are not be operated outside the limits of this standard.
NOTE 3   Requirements for hydraulic hoses for underground mining are standardised in separate standards.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 855 rev(Main)
Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
oSIST prEN 855:2012

This European Standard specifies requirements for two types of textile reinforced thermoplastics hoses and hose assemblies with maximum working pressures in the range of 69 bar to 345 bar. They are suitable for the use with:
- petroleum and synthetic based hydraulic fluids at temperatures ranging  from -40°C to +100°C;
- water based hydraulic fluids at temperatures ranging  from  0°C to +70°C;
This standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6802:2018(Main)
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
SIST EN ISO 6802:2019

This document describes hose impulse testing, with flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.
NOTE       Impulse test procedures without flexing can be found in ISO 6803.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6803:2017(Main)
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
SIST EN ISO 6803:2017

ISO 6803:2017 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.
NOTE          Impulse test procedures with flexing can be found in ISO 6802.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 857:2015(Main)
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
SIST EN 857:2015

This European Standard specifies requirements for two types of wire braid reinforced compact hoses and hose assemblies of nominal bore from 6 to 25, types 1SC and 2SC.
They are suitable for use with:
-   hydraulic fluids in accordance with ISO 6743 4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 °C to +100 °C;
-   water based fluids at temperatures ranging from -40 °C to +70 °C;
-   water at temperatures ranging from 0 °C to +70 °C.
This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE 1   The hoses are not suitable for use with castor oil based nor ester based fluids.
NOTE 2   Hoses and hose assemblies are not be operated outside the limits of this standard.
NOTE 3   Requirements for hydraulic hoses for underground mining are standardised in separate standards.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 853:2015(Main)
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
SIST EN 853:2015

This European Standard specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 51. They are suitable for use with:
-   hydraulic fluids in accordance with ISO 6743 4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40 °C to +100 °C;
-   water based fluids at temperatures ranging from -40 °C to +70 °C;
-   water at temperatures ranging from 0 °C to +70 °C.
This European Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE 1   The hoses are not suitable for use with castor oil based and ester based fluids.
NOTE 2   Hoses and hose assemblies are not be operated outside the limits of this standard.
NOTE 3   Requirements for hydraulic hoses for underground mining are standardized in separate standards.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day