EN 15714-3:2009

Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements

This document provides basic requirements for pneumatic part-turn valve actuators, both double acting and
single acting, used for on-off and modulating control duties. It includes guidelines, recommendations and
methods for enclosure and corrosion protection, control and testing.
It does not apply to pneumatic actuators which are integral parts of control valves.
Other requirements, or conditions of use, different from those indicated in this document, shall be subject to
negotiations, between the purchaser and the manufacturer/supplier, prior to order.
The terms and definitions applicable to this European Standard are given in FprEN 15714-1.

Industriearmaturen - Antriebe - Teil 3: Pneumatische Schwenkantriebe für Industriearmaturen - Grundanforderungen

Dieses Dokument enthält Grundanforderungen sowohl an doppelt als auch an einfach wirkende pneumatische Schwenk¬antriebe für Armaturen für Auf-Zu- und Modulations-Regelfunktionen. Es enthält Leitlinien, Empfeh-lungen sowie Verfahren für Gehäuse- und Korrosionsschutz, Kontrollen und Prüfungen.
Es gilt nicht für pneumatische Stellantriebe, die feste Bestandteile von Regelventilen sind.
Andere Anforderungen oder Anwendungsbedingungen als die in diesem Dokument angegebenen sollten vor Auftragserteilung zwischen Käufer und Hersteller/Lieferant vereinbart werden.
Die für die Anwendung dieser Europäischen Norm geltenden Begriffe sind in EN 15714-1 angegeben.

Robinetterie industrielle - Actionneurs - Partie 3: Actionneurs pneumatiques à fraction de tour pour robinetterie industrielle - Prescriptions de base

Le présent document fournit les prescriptions de base pour les actionneurs pneumatiques à fraction de tour
d’appareil de robinetterie à double et à simple effet, utilisés pour les fonctions tout ou rien et les fonctions de
modulation des fonctions de régulation. Il comprend des lignes directrices, des recommandations et des
méthodes pour l’enveloppe et la protection contre la corrosion, le contrôle et les essais.
Il ne s’applique pas aux actionneurs pneumatiques qui font partie intégrante des robinets de régulation.
Les prescriptions ou conditions relatives à l’utilisation, autres que celles déjà mentionnées dans le présent
document, doivent être convenues entre l’acheteur et le fabricant/fournisseur avant la commande.
Les termes et définitions applicables à la présente norme Européenne sont indiqués dans EN 15714-1.

Industrijski ventili - Pogoni - 3. del: Pnevmatični pogoni z delnim zasukom za industrijske ventile - Osnovne zahteve

Ta dokument podaja osnovne zahteve za pnevmatične pogone z dvojnim in enojnim delovanjem z delnim zasukom za ventile, ki se uporabljajo za vklopno-izklopne in modulacijsko krmilne naloge. Vključuje smernice za klasifikacijo, priporočila in metode za ohišje in zaščito pred korozijo, nadzor in preskušanje. Ne velja za pnevmatične pogone, ki so sestavni del krmilnih ventilov. O drugih zahtevah ali pogojih uporabe, ki so drugačni od navedenih v tem dokumentu, se morata pred naročilom pogoditi kupec in proizvajalec/dobavitelj. Izrazi in definicije, ki veljajo za ta evropski standard, so navedeni v EN 15714-1.

General Information

• Status: Withdrawn
• Publication Date: 20-Oct-2009
• Withdrawal Date: 18-Oct-2022
• ICS: 23.060.20 - Ball and plug valves
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 1 - Basic standards
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Oct-2022
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/341 - MANDATE TO CEN/CENELEC/ETSI FOR PROGRAMMING OF STANDARDIZATION WORK IN THE FIELD OF ECO-DESIGN OF ENERGY- USING PRODUCTS
• Ref Project: SIST EN 15714-3:2011 - Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements

Relations

• Replaced By: EN 15714-3:2022 - Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
• Effective Date: 26-Oct-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industriearmaturen - Antriebe - Teil 3: Pneumatische Schwenkantriebe für Industriearmaturen - GrundanforderungenRobinetterie industrielle - Actionneurs - Partie 3 : Actionneurs pneumatiques à fraction de tour pour robinetterie industrielle - Prescriptions de baseIndustrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements23.060.20Zapirni ventili (kroglasti in pipe)Ball and plug valvesICS:Ta slovenski standard je istoveten z:EN 15714-3:2009SIST EN 15714-3:2011en,fr,de01-november-2011SIST EN 15714-3:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15714-3
October 2009 ICS 23.060.20 English Version
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
Robinetterie industrielle - Actionneurs - Partie 3: Actionneurs pneumatiques à fraction de tour pour robinetterie industrielle - Prescriptions de base
Industriearmaturen - Antriebe - Teil 3: Pneumatische Schwenkantriebe für Industriearmaturen - Grundanforderungen This European Standard was approved by CEN on 12 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15714-3:2009: ESIST EN 15714-3:2011

Endurance test procedure . 17A.1 General . 17A.2 Test equipment . 17A.3 Test conditions . 17A.4 Test procedure . 17A.5 Acceptance criteria . 17Annex B (informative)
Actuator selection guidelines . 19SIST EN 15714-3:2011

As per EN ISO 5211. SIST EN 15714-3:2011
...