EN ISO 16773-1:2007
(Main)Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions (ISO 16773-1:2007)
Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions (ISO 16773-1:2007)
ISO 16773-1:2007 gives terms and definitions for electrochemical impedance spectroscopy (EIS) for use in the other parts of ISO 16773.
Beschichtungsstoffe - Elektrochemische Impedanzspektroskopie (EIS) von beschichteten Proben mit hoher Impedanz - Teil 1: Begriffe (ISO 16773-1:2007)
Dieser Teil von ISO 16773 legt Begriffe für die elektrochemische Impedanzspektroskopie (EIS) fest, die für die weiteren Teile der Normenreihe ISO 16773 gelten.
Peintures et vernis - Spectroscopie d'impédance électrochimique (SIE) sur des éprouvettes revêtues à haute impédance - Partie 1: Termes et définitions (ISO 16773-1:2007)
L'ISO 16773-1:2007 donne les termes et définitions relatifs à la spectrométrie d'impédance électronique (SIE) qui s'appliquent aux autres parties de l'ISO 16773.
Barve in laki - Elektrokemijska impedančna spektroskopija (EIS) vzorcev z visoko impedanco - 1. del: Pojmi in definicije (ISO 16773-1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2007
%DUYHLQODNL(OHNWURNHPLMVNDLPSHGDQþQDVSHNWURVNRSLMD (,6 Y]RUFHY]YLVRNR
LPSHGDQFRGHO 3RMPLLQGHILQLFLMH ,62
Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-
impedance coated specimens - Part 1: Terms and definitions (ISO 16773-1:2007)
Beschichtungsstoffe - Elektrochemische Impedanzspektroskopie (EIS) von
beschichteten Proben mit hoher Impedanz - Teil 1: Begriffe (ISO 16773-1:2007)
Peintures et vernis - Spectroscopie d'impédance électrochimique (SIE) sur des
éprouvettes revetues a haute impédance - Partie 1: Termes et définitions (ISO 16773-
1:2007)
Ta slovenski standard je istoveten z: EN ISO 16773-1:2007
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 16773-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2007
ICS 87.040
English Version
Paints and varnishes - Electrochemical impedance spectroscopy
(EIS) on high-impedance coated specimens - Part 1: Terms and
definitions (ISO 16773-1:2007)
Peintures et vernis - Spectroscopie d'impédance Beschichtungsstoffe - Elektrochemische
électrochimique (SIE) sur des éprouvettes revêtues à haute Impedanzspektroskopie (EIS) von beschichteten Proben
impédance - Partie 1: Termes et définitions (ISO 16773- mit hoher Impedanz - Teil 1: Begriffe (ISO 16773-1:2007)
1:2007)
This European Standard was approved by CEN on 23 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16773-1:2007: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 16773-1:2007) has been prepared by Technical Committee ISO/TC 35
"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and
varnishes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2007, and conflicting national
standards shall be withdrawn at the latest by October 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 16773-1:2007 has been approved by CEN as EN ISO 16773-1:2007 without any
modifications.
INTERNATIONAL ISO
STANDARD 16773-1
First edition
2007-04-01
Paints and varnishes — Electrochemical
impedance spectroscopy (EIS) on
high-impedance coated specimens —
Part 1:
Terms and definitions
Peintures et vernis — Spectroscopie d'impédance électrochimique
(SIE) sur des éprouvettes revêtues de haute impédance —
Partie 1: Termes et définitions
Reference number
ISO 16773-1:2007(E)
©
ISO 2007
ISO 16773-1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 16773-1:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16773-1 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and varnishes.
ISO 16773 consists of the following parts, under the general title Paints and varnishes — Electrochemical
impedance spectroscopy (EIS) on high-impedance coated specimens:
⎯ Part 1: Terms and definitions
⎯ Part 2: Collection of data
1)
⎯ Part 3: Processing and analysis of data from dummy cells
1)
⎯ Part 4: Examples of spectra of polymer-coated specimens
1) In preparation.
ISO 16773-1:2007(E)
Introduction
ISO 16773 describes a procedure for the evaluation of protective anticorrosion coatings by using
electrochemical impedance spectroscopy (EIS).
Part 1 defines terms used in electrochemical impedance spectroscopy.
Part 2 describes an experimental procedure for testing laboratory instrumentation for collecting and presenting
EIS data collected under potentiostatic control for high-impedance organic coatings on metal surfaces. Part 2
specifies a dummy cell that models the properties of a high-impedance system. It gives a test procedure and
set-up parameters for the collection of impedance data from the dummy cell and the coated metal specimens.
It outlines a procedure for comparing the recorded spectra with the theoretical data for the dummy cell in order
to establish guidelines for acceptable instrumental accuracy and limitations. It does not provide any guidance
on data interpretation.
Part 3 deals with the procedure used for the evaluation of the experimental results obtained from dummy cells
which simulate high-impedance coated samples and it gives acceptance criteria for the values obtained.
Part 4, which is informative in nature, includes some background on impedance spectra of coated metal
specimens and some typical examples of spectra from actual coatings.
iv © ISO 2007 – All rights reserved
INTERNATIONAL STANDARD ISO 16773-1:2007(E)
Paints and varnishes — Electrochemical impedance
spectroscopy (EIS) on high-impedance coated specimens —
Part 1:
Terms and definitions
1 Scope
This part of ISO 16773 gives terms and definitions for electrochemical impedance spectroscopy (EIS) for use
in the other parts of ISO 16773.
2 Terms and definitions
2.1
peak-to-peak amplitude
maximum value between maximum and m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.