EN ISO 23811:2009

Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)

ISO 23811:2009 specifies a simple practical method for calculating the non-volatile matter by volume, NVV, of a coating material from the non-volatile-matter content, NV, the density of the coating material and the density of the solvents. Using the non-volatile matter by volume results and the density obtained in accordance with ISO 23811:2009, it is possible to calculate the theoretical spreading rate of a coating material.
ISO 23811:2009 is not applicable to coating materials which exceed the critical pigment volume concentration (CPVC).

Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile durch Messen des Gehaltes an nichtflüchtigen Anteilen und der Dichte des Beschichtungsstoffes, und Berechnung der theoretischen Ergiebigkeit (ISO 23811:2009)

Diese Internationale Norm legt ein einfaches praxisnahes Verfahren zum Berechnen des Volumens nichtflüchtiger Anteile (VnfA) eines Beschichtungsstoffes aus dem Gehalt an nichtflüchtigen Anteilen (nfA), der Dichte des Beschichtungsstoffes und der Dichte der Lösemittel fest. Mit dem Ergebnis der Bestimmung des Volumens nichtflüchtiger Anteile und der nach dieser Internationalen Norm bestimmten Dichte ist es möglich, die theoretische Ergiebigkeit eines Beschichtungsstoffes zu berechnen.
Diese Internationale Norm ist nicht anwendbar für Beschichtungsstoffe, die die kritische Pigmentvolumen¬konzentration (KPVK) überschreiten.

Peintures et vernis - Détermination du pourcentage en volume de matières non volatiles par mesurage de la teneur en matières non volatiles et de la masse volumique d'un produit de peinture et calcul du rendement d'application théorique (ISO 23811:2009)

L'ISO 23811:2009 spécifie une méthode pratique et simple de calcul de la teneur en volume de matières non volatiles, NVV, dans un produit de peinture à partir de la teneur en matières non volatiles, NV, de la masse volumique du produit de peinture et de la masse volumique des solvants. Les valeurs de teneur en volume de matières non volatiles et de masse volumique obtenues par l'ISO 23811:2009 permettent de calculer le rendement théorique d'application du produit de peinture.
L'ISO 23811:2009 n'est pas applicable aux produits de peinture dépassant la concentration pigmentaire volumique critique (CPVC).

Barve in laki - Ugotavljanje prostorninskega deleža nehlapljivih snovi z merjenjem vsebnosti nehlapljivih snovi in specifične teže premaznih materialov ter izračun teoretične razlivnosti (ISO 23811:2009)

General Information

• Status: Withdrawn
• Publication Date: 14-Feb-2009
• Withdrawal Date: 26-May-2015
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-May-2015
• Ref Project: SIST EN ISO 23811:2009 - Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)

Relations

• Replaced By: EN ISO 3233-3:2015 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 23811:2009
01-julij-2009
%DUYHLQODNL8JRWDYOMDQMHSURVWRUQLQVNHJDGHOHåDQHKODSOMLYLKVQRYL]PHUMHQMHP
YVHEQRVWLQHKODSOMLYLKVQRYLLQVSHFLILþQHWHåHSUHPD]QLKPDWHULDORYWHUL]UDþXQ
WHRUHWLþQHUD]OLYQRVWL,62
Paints and varnishes - Determination of percentage volume of non-volatile matter by
measuring the non-volatile matter content and the density of the coating material, and
calculation of the theoretical spreading rate (ISO 23811:2009)
Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile durch Messen
des Gehaltes an nichtflüchtigen Anteilen und der Dichte des Beschichtungsstoffes, und
Berechnung der theoretischen Ergiebigkeit (ISO 23811:2009)
Peintures et vernis - Détermination du pourcentage en volume de matières non volatiles
par mesurage de la teneur en matières non volatiles et de la masse volumique d'un
produit de peinture et calcul du rendement d'application théorique (ISO 23811:2009)
Ta slovenski standard je istoveten z: EN ISO 23811:2009
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 23811:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 23811:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 23811:2009
EUROPEAN STANDARD
EN ISO 23811
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 87.040
English Version
Paints and varnishes - Determination of percentage volume of
non-volatile matter by measuring the non-volatile matter content
and the density of the coating material, and calculation of the
theoretical spreading rate (ISO 23811:2009)
Peintures et vernis - Détermination du pourcentage en Beschichtungsstoffe - Bestimmung des Volumens
volume de matières non volatiles par mesurage de la nichtflüchtiger Anteile durch Messen des Gehaltes an
teneur en matières non volatiles et de la masse volumique nichtflüchtigen Anteilen und der Dichte des
d'un produit de peinture et calcul du rendement Beschichtungsstoffes, und Berechnung der theoretischen
d'application théorique (ISO 23811:2009) Ergiebigkeit (ISO 23811:2009)
This European Standard was approved by CEN on 3 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23811:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 23811:2009
EN ISO 23811:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 23811:2009
EN ISO 23811:2009 (E)
Foreword
This document (EN ISO 23811:2009) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest by August 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Lux
...