EN ISO 19429:2016

Dentistry - Designation system for dental implants (ISO 19429:2015)

This International Standard provides a system for designating the location of an implant body within a jaw, and is intended for use with the scheme described in ISO 3950, Dentistry — Designation system for teeth and areas of the oral cavity. It does not in itself indicate whether the device is visible within the oral cavity or the presence of transmucosal components or implant restorations. Since the system describes location but not restoration form, it is not necessary to use the quadrant designation numbers 5-8 which are employed when indicating a primary tooth.
This information should be recorded by the responsible clinician in the patient’s file and made available to the patient by the clinician(s) who provided the care.

Zahnheilkunde - Bezeichnungssystem für Dentalimplantate (ISO 19429:2015)

Diese Internationale Norm beschreibt ein System, das die Position des Implanatkörpers im Kiefer bezeichnet und das zur Anwendung mit dem in ISO 3950 beschriebenen Schema vorgesehen ist. Es zeigt nicht selbst an, ob das Produkt in der Mundhöhle sichtbar ist oder das Vorhandensein transmukosaler Bestandteile oder Implantatrestaurationen. Weil das System Positionen beschreibt, jedoch keine Restaurationsformen, ist es nicht notwendig die Quadranten Bezeichnungsnummern 5 bis 8, die angewandt werden, um einen Milchzahn anzugeben, zu verwenden.
Diese Angaben sollten vom zuständigen Kliniker in der Patientenakte aufgezeichnet werden und vom/von den Kliniker(n) der die Behandlung durchführt dem Patienten zur Verfügung gestellt werden.

Médecine bucco-dentaire - Système de désignation pour les implants dentaires (ISO 19429:2015)

Zobozdravstvo - Sistem označb za zobne vsadke (ISO 19429:2015)

Ta mednarodni standard določa sistem za ugotavljanje mesta vsadka v čeljusti in je namenjen za uporabo s shemo, opisano v standardu ISO 3950, Zobozdravstvo - Sistem označb za zobe in območja ustne votline. Sam po sebi ne pomeni vidnosti pripomočka v ustni votlini ali prisotnosti transmukoznih sestavnih delov ali rekonstrukcije vsadkov. Ker sistem opisuje mesto in ne obliko rekonstrukcije, uporaba oznak kvadrantov 5–8, ki se uporabljajo za označitev primarnega zobovja, ni potrebna. Te podatke naj bi beležil pristojni zdravnik v bolnikovi kartoteki in zdravnik, ki izvaja zdravljenje, naj bi bolniku omogočil dostop do njih.

General Information

• Status: Published
• Publication Date: 14-Jun-2016
• Withdrawal Date: 30-Dec-2016
• ICS: 11.060.15 - Dental implants
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jun-2016
• Due Date: 28-Apr-2017
• Completion Date: 15-Jun-2016
• Ref Project: SIST EN ISO 19429:2016 - Dentistry - Designation system for dental implants (ISO 19429:2015)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2016
=RER]GUDYVWYR6LVWHPR]QDþE]D]REQHYVDGNH,62
Dentistry - Designation system for dental implants (ISO 19429:2015)
Zahnheilkunde - Bezeichnungssystem für Dentalimplantate (ISO 19429:2015)
Médecine bucco-dentaire - Système de désignation pour les implants dentaires (ISO
19429:2015)
Ta slovenski standard je istoveten z: EN ISO 19429:2016
ICS:
11.060.15 Zobni implantati Dental implants
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19429
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2016
EUROPÄISCHE NORM
ICS 11.060.15
English Version
Dentistry - Designation system for dental implants (ISO
19429:2015)
Médecine bucco-dentaire - Système de désignation Zahnheilkunde - Bezeichnungssystem für
pour les implants dentaires (ISO 19429:2015) Dentalimplantate (ISO 19429:2015)
This European Standard was approved by CEN on 29 May 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19429:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 19429:2015 has been prepared by Technical Committee ISO/TC 106 “Dentistry” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 19429:2016 by
Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2016, and conflicting national standards
shall be withdrawn at the latest by December 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19429:2015 has been approved by CEN as EN ISO 19429:2016 without any modification.

INTERNATIONAL ISO
STANDARD 19429
First edition
2015-10-01
Dentistry — Designation system for
dental implants
Médecine bucco-dentaire — Système de désignation pour les
implants dentaires
Reference number
ISO 19429:2015(E)
©
ISO 2015
ISO 19429:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 19429:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification, designation and coding . 1
Bibliography .
...