EN ISO 14801:2016
(Main)Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016)
Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016)
ISO 14801:2016 specifies a method of dynamic testing of single post endosseous dental implants of the transmucosal type in combination with their premanufactured prosthetic components. It is most useful for comparing endosseous dental implants of different designs or sizes. This International Standard is not a test of the fundamental fatigue properties of the materials from which the endosseous implants and prosthetic components are made.
This International Standard is not applicable to dental implants with endosseous lengths shorter than 8 mm nor to magnetic attachments.
While ISO 14801:2016 simulates the functional loading of an endosseous dental implant under "worst case" conditions, it is not applicable for predicting the in vivo performance of an endosseous dental implant or dental prosthesis, particularly if multiple endosseous dental implants are used for a dental prosthesis.
Zahnheilkunde - Implantate - Dynamische Belastungsprüfung für enossale Dentalimplantate (ISO 14801:2016)
Médecine bucco-dentaire - Implants - Essai de charge dynamique pour implants dentaires endo-osseux (ISO 14801:2016)
ISO 14801:2016 spécifie une méthode d'essai dynamique des implants dentaires endo-osseux à pilier unique de type transmuqueux en combinaison avec leurs composants prothétiques préfabriqués. Elle est très utile pour comparer des implants dentaires endo-osseux de conception ou de tailles différentes. La présente Norme internationale ne constitue pas un essai des propriétés de fatigue fondamentales des matériaux de fabrication de l'implant endo-osseux et des composants prothétiques.
La présente Norme internationale ne s'applique pas aux implants dentaires présentant des longueurs endo-osseuses inférieures à 8 mm, ni aux fixations magnétiques.
Même si l'ISO 14801:2016 simule la mise en charge fonctionnelle, dans les conditions «les plus défavorables», d'un implant dentaire endo-osseux, elle n'est pas applicable pour prévoir le comportement in vivo d'un implant dentaire endo-osseux ou d'une prothèse dentaire, notamment si plusieurs implants dentaires endo-osseux sont utilisés pour une prothèse dentaire.
Zobozdravstvo - Vsadki (implantati) - Dinamični preskus obremenitev zobnih vsadkov (ISO 14801:2016)
Ta mednarodni standard določa metode dinamičnih preskusov obremenitev enojnih postendosalnih zobnih
vsadkov transmukoznega tipa v kombinaciji z vnaprej izdelanimi protetičnimi komponentami.
Najbolj uporaben je za primerjavo endosalnih zobnih vsadkov različnih zasnov ali velikosti. Ta mednarodni standard ni preskus osnovnih lastnosti utrujanja materialov, iz katerih so izdelani endosalni vsadki in protetične komponente.
Ta mednarodni standard se ne uporablja za zobne vsadke z endosalnimi dolžinami manj kot 8 mm ali magnetnimi priključki.
Čeprav ta mednarodni standard simulira funkcionalno obremenitev endosalnega zobnega vsadka
pri »najslabših možnih« pogojih, se ne uporablja za napovedovanje rezultatov in vivo pri endosalnih ali zobnih protezah, zlasti če je za zobno protezo uporabljenih več endosalnih zobnih vsadkov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14801:2017
01-februar-2017
1DGRPHãþD
SIST EN ISO 14801:2008
=RER]GUDYVWYR9VDGNL LPSODQWDWL 'LQDPLþQLSUHVNXVREUHPHQLWHY]REQLK
YVDGNRY ,62
Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO
14801:2016)
Zahnheilkunde - Implantate - Dynamische Ermüdungsprüfung für enossale
Dentalimplantate (ISO 14801:2016)
Médecine bucco-dentaire - Implants - Essai de charge dynamique pour implants
dentaires endo-osseux (ISO 14801:2016)
Ta slovenski standard je istoveten z: EN ISO 14801:2016
ICS:
11.060.15 Zobni implantati Dental implants
SIST EN ISO 14801:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14801:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 14801:2017
EN ISO 14801
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2016
EUROPÄISCHE NORM
ICS 11.060.15 Supersedes EN ISO 14801:2007
English Version
Dentistry - Implants - Dynamic loading test for endosseous
dental implants (ISO 14801:2016)
Médecine bucco-dentaire - Implants - Essai de charge Zahnheilkunde - Implantate - Dynamische
dynamique pour implants dentaires endo-osseux (ISO Ermüdungsprüfung für enossale Dentalimplantate (ISO
14801:2016) 14801:2016)
This European Standard was approved by CEN on 28 August 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14801:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14801:2017
EN ISO 14801:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14801:2017
EN ISO 14801:2016 (E)
European foreword
This document (EN ISO 14801:2016) has been prepared by Technical Committee ISO/TC 106
“Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be
withdrawn at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 14801:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14801:2016 has been approved by CEN as EN ISO 14801:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 14801:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 14801:2017
INTERNATIONAL ISO
STANDARD 14801
Third edition
2016-11-01
Dentistry — Implants — Dynamic
loading test for endosseous dental
implants
Médecine bucco-dentaire — Implants — Essai de charge dyn
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.