Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products

This European Standard specifies the requirements for blown loose-fill mineral wool products installed in lofts, masonry cavity walls and frame constructions.
This European standard is a specification for the installed insulation products.
This European standard describes, when taken together with Part 1 of EN 14064, the product characteristics that are linked to the essential requirements of the EU Construction Products Directive. It also specifies the checks and tests to be used for the declarations made by the installer of the product and the rules for the evaluation of conformity.
This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. For example, see the note in the scope of Part 1 of EN 14064 regarding the possibility of special water penetration tests in different Member States.
Products with a declared thermal conductivity at 10 °C greater than 0,060 W/(m.K) are not covered by this standard.
This European Standard does not cover factory made mineral wool products in the form of mats, batts, rolls or boards.
This standard does not cover products intended for airborne sound insulation and for acoustic absorption applications.

Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung aus Mineralwolle (MW) - Teil 2: Spezifikation für die eingebauten Produkte

Diese Europäische Norm legt die Anforderungen an lose Einblasdämm¬stoffe aus Mineralwolle für den Einbau in Dachgeschosse, zweischaliges Mauerwerk und Rahmenkonstruktionen fest.
Diese Europäische Norm ist eine Spezifikation für eingebaute Dämmstoffe.
Diese Europäische Norm beschreibt zusammen mit Teil 1 von EN 14046 die Produktmerkmale, die mit den wesentlichen Anforderungen der EG-Bauproduktenrichtlinie im Zusammenhang stehen. Sie legt auch die Kontrollen und Prüfungen fest, die für die Erklärungen anzuwenden sind, die durch den Produktverarbeiter abzugeben sind; außerdem werden hier die Regeln für die Bewertung der Konformität festgelegt.
Diese Norm legt keine Anforderungsstufen für eine bestimmte Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungsfall gebrauchstauglich zu sein. Derartige Anforderungsstufen für einen bestimmten Anwendungsfall sind Regelwerken oder nicht entgegenstehenden Normen zu entnehmen. Siehe zum Beispiel die Anmerkung im Anwendungsbereich von Teil 1 von EN 14046 zur Möglichkeit, in ver-schiedenen Mitgliedstaaten spezielle Prü¬fungen des Eindringens von Wasser durchzuführen.
Produkte mit einem Nennwert der Wärmeleitfähigkeit von mehr als 0,060 W/(m  K) bei 10 °C werden von dieser Norm nicht abgedeckt.
Die vorliegende Europäische Norm deckt keine werkmäßig hergestellten Produkte aus Mineralwolle ab, die die Form von Vliesen, Fasermatten, Ballen oder Platten aufweisen.
Diese Norm gilt nicht für Produkte für die Anwendung zur Luftschalldämmung und Schallabsorption.

Produits isolants thermiques pour le bâtiment - Isolation thermique formée sur chantier à base de laine minérale (MW) - Partie 2 : Spécification des produits installés

La présente Norme européenne spécifie les exigences concernant les produits de laine minérale en vrac installés par soufflage dans les combles, murs de maçonnerie à double paroi et constructions à ossature.
Cette Norme européenne est une spécification pour les produits isolants installés.
Cette Norme européenne décrit, conjointement avec la Partie 1 de l’EN 14064, les caractéristiques du produit qui sont liées aux exigences essentielles de la Directive UE sur les Produits de Construction. Elle décrit également les contrôles et essais à utiliser pour établir les déclarations faites par l'installateur du produit ainsi que les règles applicables à l'évaluation de conformité.
La présente norme ne spécifie pas le niveau requis d'une propriété donnée devant être atteint par un produit pour en démontrer l'aptitude à la fonction dans une application particulière. Les niveaux requis pour une application particulière sont à trouver dans les réglementations ou dans des normes non contradictoires. Voir par exemple la note dans le domaine d'application de la Partie 1 de l’EN 14064 concernant la possibilité de conduire des essais spéciaux de pénétration d'eau dans différents États membres.
Les produits dont la conductivité thermique déclarée à 10 °C dépasse 0,060 W/(mK) ne sont pas couverts par la présente norme.
La présente Norme européenne ne couvre pas les produits manufacturés à base de laine minérale sous forme de feutres, de bandes, de rouleaux ou de panneaux.
La présente norme ne couvre pas les produits ayant pour fonction l'isolement aux bruits aériens et l'absorption acoustique.

Toplotnoizolacijski proizvodi za stavbe - Razsuti proizvodi iz mineralne volne (MW) - 2. del: Specifikacija za vgrajene proizvode

Ta evropski standard določa zahteve za vpihane razsute proizvode iz mineralne volne, vgrajene na podstrešjih, votlih zidovih in ogrodnih konstrukcijah. Ta evropski standard predstavlja specifikacijo za vgrajene izolacijske proizvode. Ta evropski standard skupaj s prvim delom EN 14064 opisuje lastnosti proizvodov, povezane z bistvenimi zahtevami Direktive EU o gradbenih proizvodih. Določa tudi preverjanje in preskuse, ki jih mora uporabiti monter proizvoda pri deklaracijah, in pravila za vrednotenje skladnosti. Ta standard ne določa zahtevane ravni določene lastnosti, ki jo mora doseči proizvod, da ustreza zahtevam za uporabnosti pri določenem načinu uporabe. Zahtevane ravni za določen način uporabe so navedene v predpisih ali nenasprotujočih si standardih. Glej na primer opombo znotraj področja uporabe prvega dela EN 14064 v zvezi z možnostjo posebnih preskusov neprepustnosti za vodo v različnih državah članicah. Ta standard ne zajema proizvodov z nazivno toplotno prevodnostjo nad 0,060 W/(mˇK) pri 10°C. Ta evropski standard ne zajema tovarniško izdelanih proizvodov iz mineralne volne v obliki mata, manjših plošč, zvitkov ali večjih plošč. Ta dokument ne zajema proizvodov, namenjenih za izolacijo zvoka, ki se prenaša po zraku, in za akustično absorpcijo.

General Information

Status
Published
Publication Date
23-Feb-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Oct-2020

Buy Standard

Standard
EN 14064-2:2010
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Razsuti proizvodi iz mineralne volne (MW) - 2. del: Specifikacija za vgrajene proizvodeWärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung aus Mineralwolle (MW) - Teil 2: Spezifikation für die eingebauten ProdukteProduits isolants thermiques pour le bâtiment - Isolation thermique formée sur chantier à base de laine minérale (MW) - Partie 2 : Spécification des produits installésThermal insulation products for buildings - In-situ formed loosefill mineral wool (MW) products - Part 2: Specification for the installed products91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 14064-2:2010SIST EN 14064-2:2010en,fr,de01-maj-2010SIST EN 14064-2:2010SLOVENSKI
STANDARD



SIST EN 14064-2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14064-2
February 2010 ICS 91.100.60 English Version
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
Produits isolants thermiques pour le bâtiment - Isolation thermique formée sur chantier à base de laine minérale (MW) - Partie 2 : Spécification des produits installés
Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung aus Mineralwolle (MW) - Teil 2: Spezifikation für die eingebauten Produkte This European Standard was approved by CEN on 9 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14064-2:2010: ESIST EN 14064-2:2010



EN 14064-2:2010 (E) 2 Contents Page Foreword .41Scope .52Normative references .53Terms, definitions, symbols and abbreviations .53.1Terms and definitions .53.2Symbols and abbreviations .64Requirements .64.1General .64.2Suitability of the building for the installation of the product .74.3In-situ measurements and calculations .74.3.1General .74.3.2The installed declared thermal resistance of loft insulation .74.3.3The installed declared thermal resistance of masonry cavity wall and frame construction insulation .75Test methods .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.