91.100.60 - Thermal and sound insulating materials

This standard defines requirements for factory made Vacuum Insulation Panels (VIP), which are used for the thermal insulation of buildings. This standard describes the product properties and contains test methods and rules for conformity evaluations, identification and labelling. The determination of VIP properties influencing the service life time and VIP performance is content of this standard as well. The standard provides a test method to determine the ageing of the product including the inf...view more

This draft European Standard specifies the requirements for factory made calcium silicate products with or without lamination or coating which are used for the thermal insulation of buildings.
Calcium silicate products have also the capability to regulate air moisture in building rooms, which means to absorb moisture from the air and opposite to give the moisture back to the room due to the capillarity of the product.
Calcium silicate insulation material comprising hydrated calcium silicate, n...view more

This International Standard specifies an alternating airflow method for the determination of the airflow resistance[1] [2] of porous materials for acoustical applications.
Determination of the airflow resistance based on static flow is described in ISO 9053-1.

This document specifies an alternating airflow method for the determination of the airflow resistance[5], [6] of porous materials for acoustical applications. Determination of the airflow resistance based on static flow is described in ISO 9053‑1.

This document specifies the equipment and test method for determining the effects of successive cycling from dry conditions at 20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of the product. It is applicable to thermal insulating products.
The propose of this document is to simulate the freeze–thaw effects on thermal insulating products which are frequently exposed to water and low temperature conditions, e.g. inverted roofs and unprotected ground insulation....view more

This document specifies the equipment and test method for determining the compressive creep of specimens under various conditions of stress.
This document is applicable to thermal insulating products.

This Standard is applicable to full size thermal insulating products and test specimens. This standard can also be applied to the individual layers of multi layered products. It specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions.

This document specifies the equipment and test method for determining the compressive creep of specimens under various conditions of stress. This document is applicable to thermal insulating products.

This document specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions. This document is applicable to full size thermal insulating products and test specimens. This document can also be applied to the individual layers of multi‑layered products.

This document specifies the equipment and test method for determining the effects of successive cycling from dry conditions at −20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of thermal insulating products. This document is intended to simulate the freeze?thaw effects on thermal insulating products which are frequently exposed to water and low temperature conditions, e.g. inverted roofs and unprotected ground insulation.

ISO 4898:2018 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
ISO 4898:2018 is not applicable to materials used for the thermal insulation of pipes and vessels, for impa...view more

This document specifies test methods for the evaluation of the mechanical properties for moisture curing, self-curing activatable or water drying foams dispensed from single pressurized foam containers.
This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
The followin...view more

This document specifies the requirements for products of loose-filled expanded polystyrene (EPS) beads and bonded expanded polystyrene beads for in-situ installation in masonry cavity walls and frame constructions.
This document is a specification for the insulation products before installation. It describes the product characteristics and includes procedures for testing, marking and labelling.
This document does not specify the required level of a given property to be achieved by a product t...view more

This document specifies the requirements for products of loose-filled expanded polystyrene (EPS) beads and bonded expanded polystyrene beads for in-situ installation in masonry cavity walls and frame constructions.
This document is a specification for the insulation products before installation. It describes the product characteristics and includes procedures for testing, marking and labelling.
This document does not specify the required level of a given property to be achieved by a product t...view more

This European Standard specifies equipment and procedures for determining the resistance of kits out of external thermal insulation composite systems (ETICS) to tension and/or shear forces.

This European Standard specifies the equipment and procedures for determining the tensile bond strength of an adhesive or a base coat (as a component of External Thermal Insulation Composite Systems) to a thermal insulation product.

This International Standard specifies the equipment and procedures for determining the long term water absorption of test specimens by diffusion. It is applicable to thermal insulating products. It is intended to simulate the water absorption of products subjected to high relative humidities, approximating to 100 %, on both sides and subjected to a water vapour pressure gradient for a long period of time e.g. inverted roof or unprotected ground insulation.
The test is not applicable for all typ...view more

This International Standard specifies the equipment and procedures for determining the long term water absorption of test specimens. It is applicable to thermal insulating products.
This International Standard specifies two options:
- Method 1 - partial immersion
- Method 2 - total immersion
The long term water absorption by partial immersion is intended to simulate the water absorption caused by long term water exposure.
The long term water absorption by total immersion is not directly rel...view more

This International Standard specifies the equipment and procedures for determining the short-term water absorption of specimens by partial immersion. It is applicable to thermal insulating products.
NOTE It is intended to simulate the water absorption caused by a 24 h raining period during construction work.

This document specifies the test apparatus, materials and procedures for determining the tensile bond strength of an adhesive, a reinforced base coat or a rendering system to a thermal insulation product for use as components in External Thermal Insulation Composite Systems.
The test method described in this document is not applicable to PU foam adhesives. For testing such products see EN 17101.