EN 12441-7:2004

Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction

This document specifies a flame atomic absorption spectrometric method after extraction for the determination of tin in zinc and zinc alloys. It is applicable to the products specified in EN 988, EN 1179, EN 1774 and EN 12844.
It is suitable for the determination of tin contents (mass fractions) between 0,000 5 % and 0,005 %.

Zink und Zinklegierungen - Chemische Analyse - Teil 7: Bestimmung von Zinn - FAAS-Verfahren nach Extraktion

Dieses Dokument legt ein flammenatomabsorptionsspektrometrisches Verfahren (FAAS-Verfahren) für die
Bestimmung von Zinn in Zink und Zinklegierungen fest. Das Verfahren ist auf die in EN 988, EN 1179, EN 1774
und EN 12844 festgelegten Produkte anwendbar.
Es ist geeignet für die Bestimmung von Zinngehalten (Massenanteile) zwischen 0,000 5 % und 0,005 %.

Zinc et alliages de zinc - Analyse chimique - Partie 7: Dosage de l'étain - Méthode par spectrométrie d'absorption atomique dans la flamme après extraction

La présente Norme européenne décrit une méthode d'analyse permettant de déterminer la teneur en étain du zinc et des alliages de zinc par spectrométrie d'absorption atomique après extraction. Elle est applicable aux produits spécifiés dans les EN 988, EN 1179, EN 1774 et EN 12884.
Elle convient aux dosages de fractions massiques d'étain comprises entre 0,0005 % et 0,005 %.

Cink in cinkove zlitine – Kemična analiza – 7. del: Določevanje kositra – Metoda plamenske atomske absorpcijske spektrometrije po ekstrakciji

General Information

• Status: Published
• Publication Date: 21-Dec-2004
• ICS: 77.040.30 - Chemical analysis of metals
• ICS: 77.120.60 - Lead, zinc, tin and their alloys
• Technical Committee: CEN/TC 209 - Zinc and zinc alloys
• Drafting Committee: CEN/TC 209/WG 6 - Methods of analysis and testing
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 04-Apr-2019
• Ref Project: SIST EN 12441-7:2005 - Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zink und Zinklegierungen - Chemische Analyse - Teil 7: Bestimmung von Zinn - FAAS-Verfahren nach ExtraktionZinc et alliages de zinc - Analyse chimique - Partie 7: Dosage de l'étain - Méthode par spectrométrie d'absorption atomique dans la flamme apres extractionZinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction77.120.60Svinec, cink, kositer in njihove zlitineLead, zinc, tin and their alloys77.040.30Kemijska analiza kovinChemical analysis of metalsICS:Ta slovenski standard je istoveten z:EN 12441-7:2004SIST EN 12441-7:2005en01-marec-2005SIST EN 12441-7:2005SLOVENSKI
STANDARD



SIST EN 12441-7:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12441-7December 2004ICS 77.040.30; 77.120.60English versionZinc and zinc alloys - Chemical analysis - Part 7: Determinationof tin - Flame atomic absorption spectrometric method afterextractionZinc et alliages de zinc - Analyse chimique - Partie 7:Dosage de l'étain - Méthode par spectrométrie d'absorptionatomique dans la flamme après extractionZink und Zinklegierungen - Chemische Analyse - Teil 7:Bestimmung von Zinn - FAAS-Verfahren nach ExtraktionThis European Standard was approved by CEN on 4 November 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12441-7:2004: ESIST EN 12441-7:2005



EN 12441-7:2004 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Reagents.4 6 Apparatus.6 7 Sampling.6 8 Procedure.6 9 Calculation and expression of results.7 10 Test report.8 Annex A (informative)
Additional information on international co-operative tests.9 Annex B (informative)
Graphical representation of precision data.10 Bibliography.11
SIST EN 12441-7:2005



EN 12441-7:2004 (E) 3 Foreword This document (EN 12441-7:2004) has been prepared by Technical Committee CEN/TC 209 “Zinc and zinc alloys”, the secretariat of which is held by AFNOR. This
...