77.120 - Non-ferrous metals
Non-ferrous metals
NE-Metalle
Metaux non ferreux
Neželezne kovine
General Information
This document specifies a molecular absorption spectrophotometric method for the determination of titanium content in nickel alloys. The method is applicable to titanium contents between 0,3 % (mass fraction) and 5,0 % (mass fraction). Molybdenum, if present in the alloy, can cause a high bias in the reported titanium value to the extent of 0,001 % Ti for every 1,0 % Mo. NOTE 1 Evidence exists that extension of this method is possible for titanium contents down to 0,05 % (mass fraction). NOTE 2 ...view more
- Draft8 pagesEnglish language
sale 15% off- Standard8 pagesEnglish language
sale 15% off
This document specifies the requirements for the specification and qualification of welding procedures
for the friction stir welding (FSW) of aluminium.
In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.
NOTE Service requirements, materials or manufacturing conditions can require more comprehensive
testing than is specified in this document.
- Standard30 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft29 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for determining the capability of a manufacturer to use the friction
stir welding (FSW) process for the production of products of the specified quality. It specifies quality
requirements, but does not assign those requirements to any specific product group.
In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.
- Standard20 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft17 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements for the classification of solid wire electrodes, solid wires and
rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical
composition.
The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire
electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser
beam welding, and other fusion welding processes.
- Standard20 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft17 pagesEnglish language
sale 10% off- e-Library read for1 day
This document defines terms related to friction stir welding.
In this document, the term “aluminium” refers to aluminium and its alloys.
- Standard23 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft21 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies design requirements for friction stir weld joints.
In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft10 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies requirements for the qualification of welding operators for friction stir welding
(FSW) of aluminium. In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to “operators” as defined in ISO 25239-1.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.
- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft17 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for the determination of the surface abrasion resistance of anodic oxidation coatings produced by sulfuric acid anodizing of aluminium and its alloys. It is mainly intended for the evaluation of external architectural coatings. It is a production control method that relies to a large extent on operator experience and instruction.
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
TC origin - editorial modifications to Table 8
- Corrigendum2 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies an infrared absorption method after combustion in an induction furnace for
the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %.
The method is applicable to normal production operations. It uses commercially available equipment,
which is calibrated using steel and/or ferronickel certified reference materials (CRMs).
- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft16 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides a summary of material designations, compositions and the product forms in which they are available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 "Copper and copper alloys".
- Technical specification64 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical specification64 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides a summary of material designations, compositions and the product forms in which they are available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 "Copper and copper alloys".
- Technical specification64 pagesEnglish language
sale 10% off- e-Library read for1 day
- Technical specification64 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %.
The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).
- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft16 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the carbon content in ferronickels in the range of 0,004 % to 2,5 %. The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).
- Standard14 pagesFrench language
sale 15% off- Standard12 pagesEnglish language
sale 15% off
This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %. The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).
- Standard14 pagesFrench language
sale 15% off- Standard12 pagesEnglish language
sale 15% off
This document specifies a gravimetric method for determining the mass per unit area(surface density) of anodic oxidation coatings on aluminium and its alloys. Themethod is applicable to all oxidation coatings formed by anodizing aluminium andits alloys, either cast or wrought, and is suitable for most aluminium alloys,except those in which the mass fraction of copper is greater than 6 %.
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft11 pagesEnglish language
sale 10% off- e-Library read for1 day
- Amendment7 pagesGerman language
sale 10% off- e-Library read for1 day
- Amendment9 pagesEnglish language
sale 10% off- e-Library read for1 day
- Amendment4 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for the estimation of the average grain size of copper and copper alloy products by ultrasound. This document can be applied for seamless round tubes as well as for flat products.
This method can be used in place of test methods according to EN ISO 2624, mentioned in the relevant product standards. As reference method and in case of doubt the intercept procedure or planimetric procedure will be used.
- Standard9 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft9 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies the requirements relating to: Heat resisting nickel base alloy Ni-P96-HT Cold drawn and precipitation treated Wire D ≤ 10 mm for aerospace applications.
- Standard9 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies a method for the estimation of the average grain size of copper and copper alloy products by ultrasound. This document can be applied for seamless round tubes as well as for flat products.
This method can be used in place of test methods according to EN ISO 2624, mentioned in the relevant product standards. As reference method and in case of doubt the intercept procedure or planimetric procedure will be used.
- Standard9 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft9 pagesEnglish language
sale 10% off- e-Library read for1 day