prEN 4509
(Main)Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C
Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C
This document specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series.
Classification: 1 100 MPa /315 °C .
Luft- und Raumfahrt - 100° Senkschraube, mit Flügelkreuzschlitz, Gewinde annähernd bis Kopf, aus Titanlegierung, anodisiert, mit Aluminium pigmentierter Beschichtung, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C
Série aérospatiale - Vis à tête fraisée 100° normale, à empreinte cruciforme déportée, filetées jusqu'à proximité de la tête, en alliage de titane, anodisées, avec revêtement alumino-organique, série métrique - Classification : 1 100 MPa (à température ambiante)/315 °C
Aeronavtika - Vijak, s 100° ugrezno glavo, križno zarezo, z navojem do glave, iz titanove zlitine, anodiziran, z aluminijevim pigmentiranim premazom, metrična serija - Klasifikacija: 1 100 MPa (pri temperaturi okolice)/315 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Aeronavtika - Vijak, s 100° ugrezno glavo, križno zarezo, z navojem do glave, iz
titanove zlitine, anodiziran, z aluminijevim pigmentiranim premazom, metrična
serija - Klasifikacija: 1 100 MPa (pri temperaturi okolice)/315 °C
Aerospace series - Screw, 100° countersunk normal head, offset cruciform recess,
threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric
series - Classification: 1 100 MPa (at ambient temperature)/315 °C
Luft- und Raumfahrt - 100° Senkschraube, mit Flügelkreuzschlitz, Gewinde annähernd
bis Kopf, aus Titanlegierung, anodisiert, mit Aluminium pigmentierter Beschichtung,
metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C
Série aérospatiale - Vis à tête fraisée 100° normale, à empreinte cruciforme déportée,
filetées jusqu'à proximité de la tête, en alliage de titane, anodisées, avec revêtement
alumino-organique, série métrique - Classification : 1 100 MPa (à température
ambiante)/315 °C
Ta slovenski standard je istoveten z: prEN 4509
ICS:
49.025.20 Aluminij Aluminium
49.025.30 Titan Titanium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2024
ICS 49.030.20 Will supersede EN 4509:2006
English Version
Aerospace series - Screw, 100° countersunk normal head,
offset cruciform recess, threaded to head, in titanium alloy,
anodized, with aluminium pigmented coating, metric
series - Classification: 1 100 MPa (at ambient
temperature)/315 °C
Série aérospatiale - Vis à tête fraisée 100° normale, à Luft- und Raumfahrt - 100° Senkschraube, mit
empreinte cruciforme déportée, filetées jusqu'à Flügelkreuzschlitz, Gewinde annähernd bis Kopf, aus
proximité de la tête, en alliage de titane, anodisées, Titanlegierung, anodisiert, mit Aluminium
avec revêtement alumino-organique, série métrique - pigmentierter Beschichtung, metrische Reihe - Klasse:
Classification : 1 100 MPa (à température 1 100 MPa (bei Raumtemperatur)/315 °C
ambiante)/315 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4509:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration – Dimensions – Masses . 4
4.2 Tolerances of form and position . 5
4.3 Materials . 5
4.4 Surface treatments . 5
5 Designation . 8
6 Marking . 8
7 Technical specification . 8
European foreword
This document (prEN 4509:2024) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4509:2006.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.