EN 6024:2024
(Main)Aerospace series - Screw, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C - Inch series
Aerospace series - Screw, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C - Inch series
This document specifies the characteristics for screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated, classification 1 100 MPa/315 °C, inch series, for aerospace applications.
Luft- und Raumfahrt - 100° Senk-Passschraube mit reduziertem Kopf, Flügelkreuzschlitz, enge Toleranz, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C - Zoll-Reihe
Dieses Dokument legt die Eigenschaften für 100°-Senk-Passschrauben mit reduziertem Kopf, Flügelkreuzschlitz, enge Toleranz, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2 geschmiert, Klasse 1 100 MPa /315 °C , Zoll-Reihe, für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Vis à tête fraisée 100° réduite, à empreinte cruciforme déportée, tige à tolérance serrée, filetage court, en alliage de titane, anodisée, lubrifiée au MoS2 - Classification : 1 100 MPa (à température ambiante)/315 °C - Série en inches
Le présent document spécifie les caractéristiques des vis à tête fraisée 100° réduite, à empreinte cruciforme déportée, tige à tolérance serrée, filetage court, en alliage de titane, anodisées, lubrifiées au MoS2, de classification 1 100 MPa/315 °C, série en inches, pour applications aérospatiales.
Aeronavtika - Vijak, 100° ugrezna glava, križna zareza, ozka toleranca, kratek navoj, iz titanove zlitine, anodizirani, mazan z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C - Palčne mere
Ta dokument določa značilnosti vijakov s 100° ugrezno glavo, križno zarezo, ozko toleranco, kratkim navojem, iz titanove zlitine, anodiziranih, mazanih z MoS2, s klasifikacijo 1100 MPa/315 °C, palčne mere, za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Aeronavtika - Vijak, 100° ugrezna glava, križna zareza, ozka toleranca, kratek
navoj, iz titanove zlitine, anodizirani, mazan z MoS2 - Klasifikacija: 1100 MPa (pri
temperaturi okolice)/315 °C - Palčne mere
Aerospace series - Screw, 100° countersunk reduced head, offset cruciform recess,
close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated -
Classification: 1 100 MPa (at ambient temperature)/315 °C - Inch series
Luft- und Raumfahrt - 100° Senk-Passschraube mit reduziertem Kopf, Flügelkreuzschlitz,
enge Toleranz, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2-geschmiert -
Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C - Zoll-Reihe
Série aérospatiale - Vis à tête fraisée 100° réduite, à empreinte cruciforme déportée, tige
à tolérance serrée, filetage court, en alliage de titane, anodisée, lubrifiée au MoS2 -
Classification : 1 100 MPa (à température ambiante)/315 °C - Série en inches
Ta slovenski standard je istoveten z: EN 6024:2024
ICS:
49.025.30 Titan Titanium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 6024
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 49.030.20
English Version
Aerospace series - Screw, 100° countersunk reduced head,
offset cruciform recess, close tolerance shank, short
thread, in titanium alloy, anodized, MoS2 lubricated -
Classification: 1 100 MPa (at ambient temperature)/315
°C - Inch series
Série aérospatiale - Vis à tête fraisée 100° réduite, à Luft- und Raumfahrt - 100° Senk-Passschraube mit
empreinte cruciforme déportée, tige à tolérance serrée, reduziertem Kopf, Flügelkreuzschlitz, enge Toleranz,
filetage court, en alliage de titane, anodisée, lubrifiée kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2-
au MoS2 - Classification : 1 100 MPa (à température geschmiert - Klasse: 1 100 MPa (bei
ambiante)/315 °C - Série en inches Raumtemperatur)/315 °C - Zoll-Reihe
This European Standard was approved by CEN on 8 April 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6024:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 Configuration — Dimensions — Mass . 5
4.2 Material . 8
4.3 Surface treatment . 9
5 Designation . 9
6 Marking . 9
7 Technical specification . 9
8 Quality management system. 10
Bibliography. 11
European foreword
This document (EN 6024:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document specifies the characteristics for screws, 100° countersunk reduced head, offset
cruciform recess, close tolerance shank, short thread, in titanium alloy, anodized, MoS lubricated,
1 2
classification 1 100 MPa /315 °C , inch series, for aerospace applications.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.