EN ISO 90-3:2001
(Main)Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000)
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000)
Verpackungen aus Feinstblech - Begriffe und Verfahren zur Bestimmung von Abmessungen und Volumen - Teil 3: Aerosoldosen (ISO 90-3:2000)
Dieser Teil von ISO 90 bestimmt Durchmesser, Öffnungen, Ausführungen, Formen und Volumen von runden Aerosoldosen. Es werden Verfahren zur Bestimmung von Durchmessern, Nennfüllvolumen und Nennvolumen festgelegt. Außerdem werden Grenzabweichungen für Volumen angegeben und eine internationale Kennzeichnung empfohlen.
AMMERKUNG Ein Verzeichnis der Normen, die Werkstoffe für Aerosoldosen behandeln, ist in den Literaturhinweisen aufgeführt.
Récipients métalliques légers - Définitions et détermination des dimensions et des capacités - Partie 3: Boîtiers pour aérosols (ISO 90-3:2000)
La présente partie de l'ISO 90 définit les diamètres, les ouvertures, les constructions, les formes et les capacités des boitiers ronds pour aérosols. Elle spécifie les méthodes de détermination des diamètres et des capacités nettes et ras bord. Elle fixe également les tolérances sur les capacités et recommande une désignation internationale.
NOTE : Une liste de normes relatives aux matériaux utilisés pour les boîtiers pour aérosols est donnée dans la bibliographie.
Pločevinke - Definicije in določevanje (ugotavljanje) mer in prostornin - 3. del: Pločevinke za aerosole (ISO 90-3:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2002
1DGRPHãþD
SIST EN 20090-3:1997
3ORþHYLQNH'HILQLFLMHLQGRORþHYDQMH XJRWDYOMDQMH PHULQSURVWRUQLQGHO
3ORþHYLQNH]DDHURVROH ,62
Light gauge metal containers - Definitions and determination of dimensions and
capacities - Part 3: Aerosol cans (ISO 90-3:2000)
Verpackungen aus Feinstblech - Begriffe und Verfahren zur Bestimmung von
Abmessungen und Volumen - Teil 3: Aerosoldosen (ISO 90-3:2000)
Récipients métalliques légers - Définitions et détermination des dimensions et des
capacités - Partie 3: Boîtiers pour aérosols (ISO 90-3:2000)
Ta slovenski standard je istoveten z: EN ISO 90-3:2001
ICS:
01.040.55 Pakiranje in distribucija blaga Packaging and distribution of
(Slovarji) goods (Vocabularies)
55.130 3ORþHYLQNH]DDHURVROH Aerosol containers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 90-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 55.130 Supersedes EN 20090-3:1992
English version
Light gauge metal containers - Definitions and determination of
dimensions and capacities - Part 3: Aerosol cans (ISO 90-
3:2000)
Récipients métalliques légers - Définitions et détermination Verpackungen aus Feinstblech - Begriffe und Verfahren zur
des dimensions et des capacités - Partie 3: Boîtiers pour Bestimmung von Abmessungen und Volumen - Teil 3:
aérosols (ISO 90-3:2000) Aerosoldosen (ISO 90-3:2000)
This European Standard was approved by CEN on 29 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 90-3:2001 E
worldwide for CEN national Members.
Foreword
The text of the International Standard from Technical Committee ISO/TC 52 "Light gauge
metal containers" of the International Organization for Standardization (ISO) has been taken
over as an European Standard by Technical Committee CEN/TC 261 "Packaging", the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by February 2002, and conflicting
national standards shall be withdrawn at the latest by February 2002.
This European Standard replaces EN 20090-3:1992.
According to the CEN/CENELEC Internal Regulations, the national standards organizations
of the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 90-3:2000 has been approved by CEN as a
European Standard without any modification.
INTERNATIONAL ISO
STANDARD 90-3
Second edition
2000-08-01
Light gauge metal containers — Definitions
and determination of dimensions and
capacities —
Part 3:
Aerosol cans
Récipients métalliques légers — Définitions et détermination des
dimensions et des capacités
Partie 3: Boîtiers pour aérosols
Reference number
ISO 90-3:2000(E)
©
ISO 2000
ISO 90-3:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
ISO 90-3:2000(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Terms and definitions .1
3 Determination of dimensions .7
4 Determination of capacities.9
5 Tolerances on capacities .10
6 Designation .11
Annexe A (informative) Dimensions of the top end of three-piece necked-in tinplate cans.12
Bibliography.13
ISO 90-3:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 90 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 90-3 was prepared by Technical Committee ISO/TC 52, Light gauge metal containers,
Subcommittee SC 6, Aerosol containers.
This second edition cancels and replaces the first edition (ISO 90-3:1986) which has been technically revised.
ISO 90 consists of the following parts, under the general title Light gauge metal containers — Definitions and
determination of dimensions and capacities:
� Part 1: Open-top cans
� Part 2: General use containers
� Part 3: Aerosol cans
NOTE An "open-top can" is a can one end of which is double-seamed after filling. A "general use container" is a container
which is sealed after filling with a closure that need not be double-seamed.
Annex A of this International Standard is for information only.
iv © ISO 2000 – All rights reserved
ISO 90-3:2000(E)
Introduction
ISO 90 consists of three parts which group definitions, methods of determination of dimensions and capacities, as
well as tolerances and designations of rigid containers made of metal
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.