EN 26591-2:1992
(Main)Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
Description and dimensional designation of plastic sacks are given by eight figures. Equipment, sampling, procedure, calculation and expression of results, test report for the method of measurement are specified.
Packmittel - Säcke - Beschreibung der Maße und des Meßverfahrens - Teil 2: Leere Säcke aus Kunststoff-Folie (ISO 6591-2:1985)
Diese Norm beschreibt ein Verfahren zur Bestimmung der Masse leerer Säcke aus Kunststoff-Folie und legt Massbuchstaben fest. Es ist vorzugsweise zur Anwendung bei Kunststoffsäcken nach ISO 6590-2 gedacht.
Emballages - Sacs - Description et méthode de mesurage - Partie 2: Sacs vides faits d'un film thermoplastique flexible (ISO 6591-2:1985)
La présente partie de l'ISO 6591 spécifie une méthode de mesurage et d'expression des dimensions de sacs vides faits d'un film thermoplastique flexible. Elle est destinée en premier lieu aux sacs en plastique tels que spécifiés dans l'ISO 6590/2.
NOTE -- L'ISO 6591/1 concerne les sacs vides en papier.
Embalaža - Vreče - Opis in metoda merjenja - 2. del: Prazne vreče iz termoplastične folije (ISO 6591-2:1985)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packmittel - Säcke - Beschreibung der Maße und des Meßverfahrens - Teil 2: Leere Säcke aus Kunststoff-Folie (ISO 6591-2:1985)Emballages - Sacs - Description et méthode de mesurage - Partie 2: Sacs vides faits d'un film thermoplastique flexible (ISO 6591-2:1985)Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)55.080Sacks. BagsICS:Ta slovenski standard je istoveten z:EN 26591-2:1992SIST EN 26591-2:1999en01-marec-1999SIST EN 26591-2:1999SLOVENSKI
STANDARD
International Standard . INTERNATIONAL ORGANIZATION FOR STANDARDiZATION.MEWlYHAPOAHAR OPTAHM3ALWlR I-IO CTAHflAPTkl3Al.WIM.ORGANlSATlON INTERNATIONALE DE NORMALISATION Packaging - Sacks - Description and method of measurement - Part 2 : Empty sacks made from thermoplastic flexible film Emballages - Sacs - Description et m&hode de mesurage - Partie 2 : Sacs vides faits d’un film thermoplastigue flexible First edition - 1985-11-15 UDC 621.798.15 : 678.073 Ref. No. IS0 6591/2-1985 (E) Descriptors : packing, bags, dimensions, thermoplastic resins, plastic sheets. Price based on 4 pages SIST EN 26591-2:1999
Foreword IS0 (the international Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting. International Standard IS0 6591/2 was prepared by Technical Committee ISO/TC 122, Packaging. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. @ International Organization for Standardization, 1985 Q Printed in Switzerland SIST EN 26591-2:1999
INTERNATIONALSTANDARD IS0 6591/2-1985 (El Packaging - S measurement - Description and method of Part 2 : Empty sacks made from thermoplastic flexible film 1 Scope and field of application This part of IS0 6593 specifies a method for measuring and expressing the dimensions of empty sacks of thermoplastic flexible film. It is primarily intended for appiication to plastic sacks as specified in IS0 6590/2. NOTE - IS0 6591/ 1 is intended for application to empty paper sacks. 2 References IS0 6590/2, Packaging - Sacks - Vocabulary and types - Part 2 : Sacks made from thermoplastic flexible film. IS0 7023, Packaging - Sacks - Method of sampling empty sacks for testing. 3 Definitions For the purposes of this part of IS0 6591, the following defini- tions apply. NOTES 1 Some of these definitions are repeated from IS0 6591 /I for conve- nience. 2 Unless otherwise specified, references are to external dimensions. 3 The symbols used are those shown in clause 4. 3.1 length of sack, hl : Distance between the transverse edges of the flat sack, measured at the centre, perpendicular to the bottom. 32 width of sack, b : Distance between the longitudinal edges of the flat sack, measured at the centre, parallel to the bottom. 33 width of gusset, e : Distance between the external creases of the unfolded gusset. 34 width of bottom, c : Distance between the two bottom edge-folds, measured at the centre, parallel to the sack length. 35 t\;veen width of valve, v : Internal dimension of the valve be- the folds of the valve or the valve sleeve or, in the case of a heat sealed sack, between the valve fold and the adjacent seal. 3.6 length of valve, f for 3.6.1 heat sealed sacks : Distance between the outermost edge of the sack and the innermost edge of the valve/sleeve, measured parallel to the bottom. 3.62 pasted sacks : Distance between the outermost edge of the sack and the innermost edge of the valve sleeve minus half of bottom width, measured at the centre, parallel to the bottom. 3.7 length of valve sleeve, i : Longitudinal dimension of in- ter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.