EN 2083:2001

Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard

This standard specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of conductors in copper or copper alloy for electrical cables for aerospace applications.
It applies to stranded conductors, with a nominal cross-sectional area of 0,15 mm2 to 107 mm2 inclusive.
The conductors for thermocouple extension and fire-resistant cables are not covered by this standard.

Luft- und Raumfahrt - Leiter aus Kupfer oder Kupferlegierung für elektrische Leitungen - Produktnorm

Diese Norm legt die Maße, den ohmschen Widerstand, die mechanischen eigenschaften, den Aufbau und die Masse der Leiter aus Kupfer oder Kupferlegierung für elektrische Leitungen für die Luft- und Raumfahrt fest. Sie gilt für verseilte Leiter im Nennquerschnittsbereich zwischen 0,15 mm2 und 107 mm2. Leiter für Thermoelement-Leitungen, feuerbeständige und feuerfeste Leitungen beinhaltet diese Norm nicht.

Série aérospatiale - Conducteurs en cuivre ou en alliage de cuivre pour câbles électriques - Norme de produit

La présente norme définit les dimensions, la résistance linéique, les caractéristiques mécaniques, la construction ainsi que la masse des conducteurs en cuivre ou en alliage de cuivre, pour câbles électriques pour applications aérospatiales. Elle s'applique aux conducteurs à brins multiples dont la section nominale va de 0,15 mm2 à 107 mm2 inclus. Les conducteurs pour câbles pour thermocouples et câbles résistant au feu ne sont pas couverts par la présente norme.

Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard

General Information

• Status: Published
• Publication Date: 11-Apr-2001
• Withdrawal Date: 30-Oct-2001
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 01-Jun-2022
• Ref Project: SIST EN 2083:2002 - Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Copper and copper alloys conductors for electrical cables - Product standardLuft- und Raumfahrt - Leiter aus Kupfer oder Kupferlegierung für elektrische Leitungen - ProduktnormSérie aérospatiale - Conducteurs en cuivre ou en alliage de cuivre pour câbles électriques - Norme de produitAerospace series - Copper and copper alloys conductors for electrical cables - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2083:2001SIST EN 2083:2002en01-januar-2002SIST EN 2083:2002SLOVENSKI
STANDARD



SIST EN 2083:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2083April 2001ICS 49.060English versionAerospace series - Copper and copper alloys conductors forelectrical cables - Product standardSérie aérospatiale - Conducteurs en cuivre ou en alliage decuivre pour câbles électriques - Norme de produitLuft- und Raumfahrt - Leiter aus Kupfer oderKupferlegierung für elektrische Leitungen - ProduktnormThis European Standard was approved by CEN on 28 May 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2083:2001 ESIST EN 2083:2002



Page 2EN 2083:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawnat the latest by October 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 2083:2002



Page 3EN 2083:20011ScopeThis standard specifies the dimensions, linear resistance, mechanical characteristics, construction and massof conductors in copper or copper alloy for electrical cables for aerospace applications.It applies to stranded conductors, with a nominal cross-sectional area of 0,15 mm2 to 107 mm2 inclusive.The conductors for thermocouple extension and fire-resistant cables are not covered by this standard.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies.IEC publication 28 (1925)International standard of resistance for copperIEC publication 344 (1980)Guide to the calculation of resistance of plain and coated copper conductors oflow-frequency cables and wiresEN 3475-100Aerospace series - Cable, electrical, aircraft use - Test methods - Part 100: General 1)EN 3475-301Aerospace series - Cable, electrical, aircraft use - Test methods - Part 301: Electricalresistance per unit length 1)EN 3475-506Aerospace series - Cable, electrical, aircraft use - Test methods - Part 506: Platingcontinuity 1)EN 3475-507Aerospace series - Cable, electrical, aircraft use - Test methods - Part 507: Adherenceof plating 1)3Definitions and symbolsFor the purposes of this standard, the definitions and symbols given in
...