EN 4630:2007

Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

This standard specifies the requirements relating to:
Steel FE-PM 3504 (X4CrNiMo16-5-1)
Air melted
Hardened and tempered
Forgings
De ≤ 200 mm
900 MPa ≤ Rm ≤ 1 050 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM 3504 (X4CrNiMo16-5-1) - Lufterschmolzen - Gehärtet- und angelassen - Schmiedestücke - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

Diese Norm legt die Anforderungen an
Stahl FE-PM 3504 (X4CrNiMo16-5-1)
lufterschmolzen
gehärtet und angelassen
Schmiedestücke
De ≤ 200 mm
900 MPa ≤ Rm ≤ 1 050 MPa
zur Verwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM 3504 (X4CrNiMo16-5-1) - Élaboré à l'air - Trempé et revenu - Pièces forgées - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

Aeronavtika - Jeklo FE-PM 3504 (X4CrNiMo16-5-1) - Taljeno - Utrjeno in mehko žarjeno - Izkovki - De =< 200 mm - 900 MPa =< Rm =< 1 050 MPa

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2007
• Withdrawal Date: 14-Oct-2014
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Oct-2014
• Ref Project: SIST EN 4630:2008 - Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa

Relations

• Replaced By: EN 4630:2014 - Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
• Effective Date: 11-Jul-2012

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2008
Aeronavtika - Jeklo FE-PM 3504 (X4CrNiMo16-5-1) - Taljeno - Utrjeno in mehko
žarjeno - Izkovki - De =< 200 mm - 900 MPa =< Rm =< 1 050 MPa
$HURVSDFHVHULHV6WHHO)(30;&U1L0R$LUPHOWHG+DUGHQHGDQG
WHPSHUHG)RUJLQJV'H”PP03D”5P”03D
/XIWXQG5DXPIDKUW6WDKO)(30;&U1L0R/XIWHUVFKPRO]HQ*HKlUWHW
XQGDQJHODVVHQ6FKPLHGHVWFNH'H”PP03D”5P”03D
6pULHDpURVSDWLDOH$FLHU)(30;&U1L0ReODERUpjO
DLU7UHPSpHW
UHYHQX3LqFHVIRUJpHV'H”PP03D”5P”03D
Ta slovenski standard je istoveten z: EN 4630:2007
ICS:
49.025.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4630
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 49.025.10
English Version
Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air
melted - Hardened and tempered - Forgings - De ≤ 200 mm -
900 MPa ≤ Rm ≤ 1 050 MPa
Série aérospatiale - Acier FE-PM 3504 (X4CrNiMo16-5-1) - Luft- und Raumfahrt - Stahl FE-PM 3504 (X4CrNiMo16-5-1)
Élaboré à l'air - Trempé et revenu - Pièces forgées - De ≤ - Lufterschmolzen - Gehärtet- und angelassen -
200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa Schmiedestücke - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050
MPa
This European Standard was approved by CEN on 23 June 2007.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4630:2007: E
worldwide for CEN national Members.

Foreword
This document (EN 4630:2007) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at
the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Introduction
This standard is part of the series of EN
...