iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12524:2000

(Main)

Building materials and products - Hygrothermal properties - Tabulated design values

Building materials and products - Hygrothermal properties - Tabulated design values

This standard gives design data in tabulated form for heat and moisture transfer calculation, for thermally homogeneous materials and products commonly used in building construction. It also gives data to enable the calculation and conversion of design thermal values for various environmental conditions.

Baustoffe und -produkte - Wärme- und feuchteschutz-technische Eigenschaften - Tabellierte Bemessungswerte

Diese Norm gilt für Bemessungswerte in Tabellenform für wärmetechnische homogene Stoffe und Produkte zur Berechnung des Wärme- und des Feuchtetransportes im Bauwesen. Sie gibt auch Daten zur Berechnung und Umrechnung von wärmetechnischen Bemessungswerten für verschiedene Umweltbedingungen an.

Matériaux et produits pour le bâtiment - Propriétés hygrothermiques - Valeurs utiles tabulées

La présente norme donne sous forme tabulée des valeurs utiles pour les calculs de transfert de chaleur et d'humidité, pour des matériaux et produits thermiquement homogènes d'usage courant dans la construction des bâtiments. Elle fournit des données permettant le calcul et la conversion de valeurs thermiques utiles pour diverses conditions ambiantes.

Gradbeni materiali in proizvodi - Higrotermalne lastnosti - Tabelirane računske vrednosti

General Information

Status
Withdrawn
Publication Date
18-Apr-2000
Withdrawal Date
14-Dec-2007
ICS
91.100.01 - Construction materials in general
91.120.10 - Thermal insulation of buildings
Technical Committee
CEN/TC 89 - Thermal performance of buildings and building components
Drafting Committee
CEN/TC 89/WG 2 - Thermal transmittance
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2007
Completion Date
15-Dec-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
Ref Project
SIST EN 12524:2001 - Building materials and products - Hygrothermal properties - Tabulated design values

Relations

Replaced By
EN ISO 10456:2007 - Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
Effective Date
22-Dec-2008

Buy Standard

EN 12524:2001EN 12524:2001
PreviousNext
Standard
EN 12524:2001
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YUHGQRVWLBaustoffe und -produkte - Wärme- und feuchteschutz-technische Eigenschaften - Tabellierte BemessungswerteMatériaux et produits pour le bâtiment - Propriétés hygrothermiques - Valeurs utiles tabuléesBuilding materials and products - Hygrothermal properties - Tabulated design values91.120.10Toplotna izolacija stavbThermal insul
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12572:2016(Main)
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
SIST EN ISO 12572:2016

ISO 12572:2016 specifies a method based on cup tests for determining the water vapour permeance of building products and the water vapour permeability of building materials under isothermal conditions. Different sets of test conditions are specified.
The general principles are applicable to all hygroscopic and non-hygroscopic building materials and products, including insulation materials and including those with facings and integral skins. Annexes give details of test methods suitable for different material types.
The results obtained by this method are suitable for design purposes, production control and for inclusion in product specifications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 14613:2003(Main)
Thermal performance of building materials and components - Principles for the determination of thermal properties of moist material and components
SIST-TP CEN/TR 14613:2005

The theoretical background for the effects of moisture on heat transfer, valid for all types of materials but restricted to moisture contents in the hygroscopic range.

  • Technical report
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12664:2001(Main)
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
SIST EN 12664:2002

This standard specifies principles and testing procedures for determining, by means of the guarded hot plate or heat flow meter methods, the thermal resistance of test specimens either in the dry state or conditioned to equilibrium with moist air, having a thermal resistance of not less than 0,1 m2.K/W and a (hygro)thermal transmissivity or thermal conductivity up to 2,0 W/(m.K). (It is expected that the thermal resistance of most masonry specimen will be less than 0,5 m2.K/W).

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12667:2001(Main)
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
SIST EN 12667:2002

This standard specifies principles and testing procedures for determining, by means of the guarded hot plate or heat flow meter methods, the thermal resistance of test specimens having a thermal resistance of not less than 0,5 m2 K/W.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1946-5:2000(Main)
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods
SIST EN 1946-5:2001

This part 5 of this standard provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measurements on circular pipe insulation according to EN ISO 8497:1994. It complements the common criteria in part 1. Guidance is given on the organization and contents of the equipment manual, the calibration and maintenance files and the measurement procedure document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1946-4:2000(Main)
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods
SIST EN 1946-4:2001

This part 4 of this standard provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measurements on products and components using calibrated or guarded hot box apparatus in accordance with EN ISO 8990:1996, including its application to doors and windows in accordance with EN ISO 12567, or using a heat flow meter in a hot box apparatus in accordance with EN 1934:1998. It complements the common criteria in Part 1.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1946-3:1999(Main)
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
SIST EN 1946-3:2000

This Part 3 of this Standard provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measurements by the heat flow meter method according to prEN 12667 and prEN 12664. It complements the common criteria in part 1. Guidance is given on the organization and contents of the equipment manual, the calibration and maintenance files and the measurement procedure document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1946-1:1999(Main)
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria
SIST EN 1946-1:2000

This standard gives specific technical criteria to be used within the frame of the general criteria given in EN45001 and EN45002 for the assessment of laboratories performing heat transfer property measurements of building products and components according to standardized test methods. It is relevant both to assessments conducted internally and to those carried out formally by an accreditation body, and is intended to be of assistance to all interested parties.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1946-2:1999(Main)
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method
SIST EN 1946-2:2000

This part 2 of this standard provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measurements by the guarded hot plate method according to prEN12667 and prEN12664.  It complements the common criteria in part 1. Guidance is given on the organization and contents of the equipment manual, the calibration and maintenance files and the measurement procedure document.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12572:2016(Main)
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
SIST EN ISO 12572:2016

ISO 12572:2016 specifies a method based on cup tests for determining the water vapour permeance of building products and the water vapour permeability of building materials under isothermal conditions. Different sets of test conditions are specified.
The general principles are applicable to all hygroscopic and non-hygroscopic building materials and products, including insulation materials and including those with facings and integral skins. Annexes give details of test methods suitable for different material types.
The results obtained by this method are suitable for design purposes, production control and for inclusion in product specifications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day