EN ISO 11126-3:1997

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993)

Specifies requirements for copper refinery slag abrasives: designation, sampling, identification and marking, information to be supplied by the manufacturer or supplier, ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified apply to abrasives supplied in the "new" condition only.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 3: Strahlmittel aus Kupferhüttenschlacke (ISO 11126-3)

Dieser Teil von ISO 11126 legt Anforderungen für Strahlmittel aus Kupferhüttenschlacke fest. Er legt Bereiche die Korngrösse und Grenzwerte für scheinbare Dichte, Härte, Feuchtegehalt, Leitfähigkeit des wässrigen Eluates (wasser- löscliche Verunreinigungen) und wasserlösliche Chloride fest.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés à la préparation par projection - Partie 3: Scories de raffinage du cuivre (ISO 11126-3:1993)

La présente partie de l'ISO 11126 prescrit des exigences relatives aux abrasifs en scories de raffinage du cuivre, tels qu'ils sont fournis pour la préparation par projection. Elle spécifie les tailles de particules et les valeurs de masse volumique apparente, dureté Mohs, teneur en humidité, conductivité de l'extrait aqueux et teneur en chlorures solubles dans l'eau. Les spécifications prescrites dans la présente partie de l'ISO 11126 s'appliquent seulement aux abrasifs fournis à l'état neuf. Elles ne s'appliquent pas aux abrasifs pendant ou après utilisation. Les méthodes d'essai relatives aux abrasifs non métalliques destinés à la préparation par projection sont indiquées dans les différentes parties de l'ISO 11127.
NOTES 1 L'annexe A donne des informations sur les normes nationales généralement consultables portant sur les abrasifs non métalliques. 2 Quoique la présente partie de l'ISO 11126 ait été spécialement établie pour satisfaire aux exigences de préparation des tôleries, les propriétés prescrites seront généralement appropriées pour l'emploi en préparation de subjectiles ou éléments d'autres matériaux, par les techniques de décapage par projection. Ces techniques sont décrites dans l'ISO 8504-2:1992, Préparation des subjectiles d'acier avant application de peintures et de produits assimilés -- Méthodes de préparation des subjectiles -- Partie 2: Décapage par projection d'abrasif.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Specifikacije za nekovinske granulate za peskanje - 3. del: Bakrova rafinirana žlindra (ISO 11126-3:1993)

General Information

• Status: Withdrawn
• Publication Date: 22-Jul-1997
• Withdrawal Date: 02-Oct-2018
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 03-Oct-2018
• Ref Project: SIST EN ISO 11126-3:1997 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993)

Relations

• Replaced By: EN ISO 11126-3:2018 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018)
• Effective Date: 10-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-1997
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov -
Specifikacije za nekovinske granulate za peskanje - 3. del: Bakrova rafinirana
žlindra (ISO 11126-3:1993)
Preparation of steel substrates before application of paints and related products -
Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
(ISO 11126-3:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Anforderungen an nichtmetallische Strahlmittel - Teil 3: Strahlmittel aus
Kupferhüttenschlacke (ISO 11126-3)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Spécifications pour abrasifs non métalliques destinés a la préparation par
projection - Partie 3: Scories de raffinage du cuivre (ISO 11126-3:1993)
Ta slovenski standard je istoveten z: EN ISO 11126-3:1997
ICS:
25.220.10 Priprava površine Surface preparation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL
ISO
STANDARD 11126-3
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
products - Specifications for non-metallic
blast-cleaning abrasives -
Part 3:
Copper refinery slag
Prhparation des subjectiles d’acier avant application de peintures et de
Spkifica tions pour abrasifs non m6 talliques
produits assimik -
destinh 2 Ia phparation par projection -
Partie 3: Stories de raffinage du cuivre
Reference number
ISO Ill 26-3:1993(E)
ISO 1112&3:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bedies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11126-3 was prepared by Technical Committee
lSO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel substra tes be fore applica tion o f pain ts and related products.
ISO Ill26 consists of the following Parts, under the general title Prep-
aration of steel Substrates before application of paints and related
products - Specifica tions for non-metallic blast-cleaning abrasives:
- Part 1: General in troduction and classifica tion
- Part 26 Silica sand
- Part 3:
Copper refinety slag
- Part 4: Coal furnace slag
Nickel refinery slag
- Part 5:
- Part 6: Iran furnace slag
- Part 7: Fused aluminium Oxide
- Part 8: Qlivine sand
- Part 9: Staurolite
0 ISO 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland
0 ISO ISO 11126=3:1993(E)
- Part 10: Garnet
At the time of publication of this part of ISO 11126, Parts 2, 7, 9 and 10
were in course of preparation.
Annex A of this part of ISO 11126 is for information only.

This page intentionally left blank

ISO 11126-3:1993(E)
INTERNATIONAL STANDARD 0 ISO
Preparation of steel Substrates before application of
paints and related products - Specifications for
non-metallic blast-cleaning abrasives -
Part 3:
Copper refinery slag
WARNING - Equipment, materiak and abrasives used for surface preparation tan be hazardous
id used carelessiy, Many national regulations exist for those materlaOs and abrasives that are
considered to be hazardous during or after use (waste management), such as free silica or
carcinogenic or toxic substances. These regulations are therefore to be observed. It is important
to ensure that adequate instructions are given and that all required precautions are exercised.
niques are described in ISO 8504-2:1992, Beparation of
1 Scope
steel Substrates before application of paints and reiated
Surface preparation methods - Part 2: Abras-
products -
ive blas t-cleaning.
This part of ISO 11126 specifies requirements for
topper refinery slag abrasives, as supplied for blast-
cleaning processes. lt specifies ranges of particle
2 Normative references
sizes and values for apparent density, Mohs hardness,
moisture content, conductivity of aqueous extract and
The following Standards contain provisions which,
water-soluble chlorides.
through reference in this text, constitute provisions
of this part of ISO 11126. At the time of publication,
The requirements specified in this part of ISO 11126
the editions indicated were valid. All Standards are
apply to abrasives supplied in the “ne,” condition
subject to revision, and Parties to agreements based
only. They do not apply to abrasives either during or
on this part of ISO 11126 are encouraged to investi-
after use.
gate the possibility of applying the most recent edi-
tions of the Standards indicated below. Members of
Test methods for non-metallic blast-cleaning
IEC and ISO maintain registers of currently valid
abrasives are given in the various Parts of
International Standards.
ISO 11127.
NOTES
ISO 11127-1 :1993, Preparation of steel Substrates
before application of paints and related products -
1 Information on commonly referenced national Standards
Test methods for non-metallic blast-cleaning abrasives
for non-me
...