Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets - Product standard

This document defines a banding band, style Z, for terminating individual and/or overall cable screens to cable outlets. The bands delivered in flat condition F (see Clause 6) which need to be double wrapped prior to their installation. The bands delivered in condition C (see Clause 6) are factory pre-double wrapped and ready for installation.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 033: Edelstahlspannband, Bauform Z, zum Anschluss von Einzel- und/oder Gesamtschirmen an Endgehäusen - Produktnorm

Dieses Dokument legt ein Spannband, Bauform Z, zum Anschluss von Einzel  und/oder Gesamtschirmen an Endgehäusen fest. Die im flachen Zustand F (siehe Abschnitt 6) gelieferten Bänder sind vor ihrem Einbau doppelt zu rollen. Die im Zustand C (siehe Abschnitt 6) gelieferten Bänder sind werkseitig doppelt vorgerollt und einsatzfähig.

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 033 : Bande de cerclage en acier inoxydable, type Z, pour fixation des blindages individuels et/ou complets aux raccords - Norme de produit

Le présent document définit une bande de cerclage, de type Z, pour la fixation des blindages de câbles individuels ou complets aux raccords. Les bandes livrées à l’état à plat F (voir Article 6) nécessitent d’être enroulées en double épaisseur avant installation. Les bandes livrées à l’état C (voir Article 6) sont pré-enroulées en double en usine et prêtes à être installées.

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 033. del: Nerjavni jekleni ovijalni pas, vrsta Z, za pritrjevanje posameznih in/ali celotnih zaslonov na kabelske izvode - Standard za proizvod

Ta dokument določa nerjavni ovijalni pas, vrsta Z, za zaključevanje posameznih in/ali celotnih zaslonov na kabelske izvode. Ovijalni pas je dobavljen v ploščatem stanju F (glej točko 6), ki ga je treba pred namestitvijo dvakrat oviti. Ovijalni pas, ki je dobavljen v stanju C (glej točko 6), je tovarniško že predhodno dvakrat ovit in pripravljen za namestitev.

General Information

Status
Published
Publication Date
22-Oct-2019
Withdrawal Date
29-Apr-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
23-Oct-2019
Completion Date
23-Oct-2019

Relations

Buy Standard

Standard
EN 3660-033:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2020
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
033. del: Nerjavni jekleni ovijalni pas, vrsta Z, za pritrjevanje posameznih in/ali
celotnih zaslonov na kabelske izvode - Standard za proizvod
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of
individual and/or overall screens to cable outlets - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 033: Edelstahlspannband, Bauform Z, zum Anschluss von
Einzel- und/oder Gesamtschirmen an Endgehäusen - Produktstandard
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 033 : Bandes métalliques, style Z, pour fixation et/ou des
blindages aux extrémités des câbles - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-033:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3660-033
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 033:
Stainless steel banding band, style Z, for attachment of
individual and/or overall screens to cable outlets - Product
standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt  - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 033:
optiques - Partie 033 : Bande de cerclage en acier Edelstahlspannband, Bauform Z, zum Anschluss von
inoxydable, type Z, pour fixation des blindages Einzel- und/oder Gesamtschirmen an Endgehäusen -
individuels et/ou complets aux raccords - Norme de Produktstandard
produit
This European Standard was approved by CEN on 26 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-033:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Characteristics . 5
5 Tests . 8
6 Designation . 13
7 Marking . 13
8 Technical specification . 13

European foreword
This document (EN 3660-033:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by April 2020, and conflicting national standards shall be withdrawn at
the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document defines a banding band, style Z, for terminating individual and/or overall cable screens to
cable outlets. The bands delivered in flat condition F (see Clause 6) which need to be double wrapped
prior to their installation. The bands delivered in condition C (see Clause 6) are factory pre-double
wrapped and ready for installation.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
(
EN 2591-100 all parts), Aerospace series ― Elements of electrical and optical connection ― Test methods
― Part 100: General
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 002: Index of product standards
EN 3660-038, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 038: Manual installation tool, style Z, for installation of stainless steel shield
termination band EN 3660-033, to cable outlet accessories — Product standard
EN 3660-063, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-
locking for EN 3645 — Product standard
1)
A-A-59569, Braid, wire (copper, tin-coated, silver-coated, or nickel-coated, tubular or flat)
2)
SAE AS 85049, Connector accessories, Electrical General Specification For
2)
SAE AMS 2700, Passivation of Corrosion Resistant Steels
ASTM A 240, Standard Specification for, stainless and heat-resisting Chromium-Nickel Steel Plate, Sheet and
3)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.