EN 1870-16:2005

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting

This document deals with all significant hazards, hazardous situations and events which are relevant to double mitre sawing machines for V-cutting with a maximum cutting capacity (width and height) of £ 200 mm, fitted or not with pneumatic systems, hereinafter referred to as the machine, designed to cut solid wood, This document deals with all significant hazards, hazardous situations and events which are relevant to
double mitre sawing machines for V-cutting with a maximum cutting capacity (width and height) of ¡Ü200 mm,
fitted or not with pneumatic systems, hereinafter referred to as the machine, designed to cut solid wood,
chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or
edgings, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause
4).
The requirements of this document apply to stationary and displaceable double mitre saw for V-cutting (see
3.2.3 and 3.2.4).
This document doechipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
The requirements of this document apply to stationary and displaceable double mitre saw for V-cutting (see 3.2.3 and 3.2.4).
This document does not apply to transportable mitre saws or any adaptation permitting their use in a different mode, i.e. bench mounting.
NOTE 1   Transportable motor-operated electric single blade mitre saws are covered by the requirements of
EN 61029-1:1996 and EN 61029-2-9:2002.
This document is not applicable to double mitre sawing machines for V-cutting fitted with hydraulic system.
This document is not applicable to double mitre sawing machines for V-cutting which are manufactured before the date of publication of this document by CEN.
NOTE 2   Machines covered by this document are listed under A.1.1 of Annex IV of the Machinery Directive.

Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 16: Klinkschnittkreissägemaschinen

Diese Europäische Norm beschreibt die Anforderungen und/oder Maßnahmen für die Beseitigung von Gefähr-dungen und/oder zur Begrenzung der Risiken an Klinkschnittkreissägemaschinen mit einer maximalen Schnittka-pazität (Breite und Höhe) von £ 200 mm, im folgenden als "Maschinen" bezeichnet, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten oder Sperrholz, sowie diesen Werkstoffen, wenn sie Beschichtungen aus Kunststoff oder Kunststoffkanten haben.
Diese Europäische Norm behandelt die für die Maschine zutreffenden Gefährdungen, wie sie in Abschnitt 4 aufgelistet sind.
Diese Europäische Norm behandelt bei Computer-gesteuerten (CNC) Maschinen nicht die im Zusammenhang mit der elektromagnetischen Verträglichkeit (EMV) bestehenden Gefährdungen.
Diese Europäische Norm gilt nicht für handgeführte Holzbearbeitungsmaschinen einschließlich solcher Einrichtungen, die ihre Verwendung in einer anderen Weise z.B. in einer Stationäreinrichtung ermöglichen.
Diese Europäische Norm ist in erster Linie auf Maschinen anzuwenden, die nach dem Datum der Herausgabe dieser Europäischen Norm hergestellt werden.

Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 16: Tronçonneuses doubles à coupe en V

La présente Norme européenne spécifie les prescriptions et /ou les mesures devant être prises pour éliminer les phénomènes dangereux et /ou limiter les risques sur les tronçonneuses doubles pour coupe en V d' une capacité maximale de coupe (largeur et hauteur) £ 200 mm, ci-après désignées par le terme "machines", conçues pour la coupe de bois massif, de panneaux de particules et de fibres, de contreplaqué, ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et /ou de plastique /alliage léger stratifié.
La présente Norme européenne couvre les phénomènes dangereux applicables à ces machines donnés à l'article 4.
Pour les machines à commande numérique (CN), la présente norme européenne ne traite pas les phénomènes dangereux liés à la comptabilité électromagnétique (CEM).
La présente Norme européenne n'est pas applicable aux machines portatives, ni à toute adaptation permettant leur utilisation de manière différente, c'est à dire fixées par exemple sur un bâti.
La présente Norme européenne est applicable avant tout aux machines fabriquées après la date de publication de la présente Norme européenne.

Varnost lesnoobdelovalnih strojev – Krožne žage – 16. del: Dvojne zajeralne žage za V-rezanje

General Information

• Status: Withdrawn
• Publication Date: 05-Apr-2005
• Withdrawal Date: 13-Oct-2009
• ICS: 79.120.10 - Woodworking machines
• Technical Committee: CEN/TC 142 - Woodworking machines - Safety
• Drafting Committee: CEN/TC 142/WG 4 - Circular sawing machines
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Oct-2009
• Completion Date: 14-Oct-2009
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN 1870-16:2005 - Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting

Relations

• Merged Into: EN 1870-16:2005+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting
• Effective Date: 18-Jan-2023
• Amended By: EN 1870-16:2005/prA1 - Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost lesnoobdelovalnih strojev – Krožne žage – 16. del: Dvojne zajeralne žage za V-rezanjeSicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 16:
KlinkschnittkreissägemaschinenSécurité des machines pour le travail du bois - Machines a scier circulaires - Partie 16: Tronçonneuses doubles a coupe en VSafety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-16:2005SIST EN 1870-16:2005en01-oktober-2005SIST EN 1870-16:2005SLOVENSKI
STANDARD



SIST EN 1870-16:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1870-16April 2005ICS 79.120.10English versionSafety of woodworking machines - Circular sawing machines -Part 16: Double mitre sawing machines for V-cuttingSécurité des machines pour le travail du bois - Machines àscier circulaires - Partie 16: Tronçonneuses doubles àcoupe en VSicherheit von Holzbearbeitungsmaschinen -Kreissägemaschinen - Teil 16: KlinkschnittkreissägemaschinenThis European Standard was approved by CEN on 21 February 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1870-16:2005: ESIST EN 1870-16:2005



EN 1870-16:2005 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.7 3 Terms and definitions.9 3.1 General.9 3.2 Terms.9 3.3 Definitions.10 4 List of significant hazards.13 5 Safety requirements and/or measures.16 5.1 General.16 5.2 Controls.17 5.2.1 Safety and reliability of control systems.17 5.2.2 Position of controls.20 5.2.3 Starting.21 5.2.4 Normal stopping.
...