iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 5674

(Main)

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO/DIS 5674:2022)

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO/DIS 5674:2022)

Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO/DIS 5674:2022)

Diese Internationale Norm beschreibt Laborprüfungen zur Bestimmung von Festigkeit und Verschleiß von Schutzeinrichtungen für Gelenkwellen an Traktoren und Maschinen in der Land- und Forstwirtschaft und deren Annahmekriterien. Die Anwendung in Kombination mit ISO 5673 1:2005 ist beabsichtigt.
Sie gilt für die Prüfung von Gelenkwellenschutzeinrichtungen und ihren Rückhalteeinrichtungen. Sie gilt nicht für die Prüfung von Schutzeinrichtungen, die zur Benutzung als Stufen gestaltet und ausgelegt sind.

Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à cardans de prise de force (p.d.f) - Essais de résistance mécanique et d'usure et critères d'acceptation (ISO/DIS 5674:2022)

Traktorji ter kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskusi trdnosti in obrabe ter merila sprejemljivosti (ISO/DIS 5674:2022)

General Information

Status
Not Published
Publication Date
27-Nov-2023
ICS
65.060.01 - Agricultural machines and equipment in general
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 1 - General safety requirements
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
26-Jul-2022
Completion Date
26-Jul-2022
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
oSIST prEN ISO 5674:2022 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO/DIS 5674:2022)

Relations

Revises
EN ISO 5674:2009 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
Effective Date
21-Jan-2020

Buy Standard

prEN ISO 5674:2022prEN ISO 5674:2022
PreviousNext
Draft
prEN ISO 5674:2022
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 5674:2022
01-julij-2022
Traktorji ter kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskusi
trdnosti in obrabe ter merila sprejemljivosti (ISO/DIS 5674:2022)
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO)
drive-shafts - Strength and wear tests and acceptance criteria (ISO/DIS 5674:2022)
Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für
Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO/DIS
5674:2022)
Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à
cardans de prise de force (p.d.f) - Essais de résistance mécanique et d'usure et critères
d'acceptation (ISO/DIS 5674:2022)
Ta slovenski standard je istoveten z: prEN ISO 5674
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
oSIST prEN ISO 5674:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5674:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5674:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5674
ISO/TC 23/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2022-05-03 2022-07-26
Tractors and machinery for agriculture and forestry —
Guards for power take-off (PTO) drive-shafts — Strength
and wear tests and acceptance criteria
Tracteurs et matériels agricoles et forestiers — Protecteurs d'arbres de transmission à cardans de prise de
force — Essais de résistance mécanique et d'usure et critères d'acceptation
ICS: 65.060.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 5674:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5674:2022
ISO/DIS 5674:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5674:2022
ISO/DIS 5674:2022(E)
Contents Page
Foreword .iv
European Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General test conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 25119-1:2023/A1:2023(Amendment)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development - Amendment 1 (ISO 25119-1:2018/Amd 1:2020)
SIST EN ISO 25119-1:2023/A1:2023
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25119-4:2023(Main)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018)
SIST EN ISO 25119-4:2023

This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines).
This document is not applicable to:
—          aircraft and air-cushion vehicles used in agriculture;
—          lawn and garden equipment.
This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications.
NOTE 1    Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer.
This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards.
Examples included within the scope of this document:
—          SRP/CS limiting current flow in electric hybrids to prevent insulation failure/shock hazards;
—          electromagnetic interference with the SRP/CS;
—          SRP/CS designed to prevent fire.
Examples not included in the scope of this document:
—          insulation failure due to friction that leads to electric shock hazards;
—          nominal electromagnetic radiation impacting nearby machine control systems;
—          corrosion causing electric cables to overheat.
This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic).
NOTE 2    See also ISO 12100 for design principles related to the safety of machinery.
This document is not applicable to safety related parts of control systems manufactured before the date of its publication.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25119-2:2023(Main)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019)
SIST EN ISO 25119-2:2023

This document specifies the concept phase of the development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (such as street-sweeping machines).
This document is not applicable to:
—          aircraft and air-cushion vehicles used in agriculture;
—          lawn and garden equipment.
This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications.
NOTE 1    Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer.
This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards., unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protection measures, safeguards, or safety-related functions in response to non-E/E/PES hazards.
Examples included within the scope of this document:
—          SRP/CS's limiting current flow in electric hybrids to prevent insulation failure/shock hazards;
—          electromagnetic interference with the SRP/CS;
—           SRP/CS's designed to prevent fire.
Examples not included within the scope of this document:
—          insulation failure due to friction that leads to electric shock hazards;
—          nominal electromagnetic radiation impacting nearby machine control systems;
—          corrosion causing electric cables to overheat.
This document is not applicable to non-E/E/PES systems (such as hydraulic, mechanic or pneumatic).
NOTE 2    See also ISO 12100 for design principles related to the safety of machinery.
This document is not applicable to safety-related parts of control systems manufactured before the date of its publication.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25119-4:2023/A1:2023(Amendment)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes - Amendment 1 (ISO 25119-4:2018/Amd 1:2020)
SIST EN ISO 25119-4:2023/A1:2023
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25119-3:2023(Main)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018)
SIST EN ISO 25119-3:2023

This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines).
This document is not applicable to:
—          aircraft and air-cushion vehicles used in agriculture;
—          lawn and garden equipment.
This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications.
NOTE 1    Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer.
This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards.
Examples included within the scope of this document:
—          SRP/CS's limiting current flow in electric hybrids to prevent insulation failure/shock hazards;
—          electromagnetic interference with the SRP/CS;
—          SRP/CS's designed to prevent fire.
Examples not included in the scope of this document:
—          insulation failure due to friction that leads to electric shock hazards;
—          nominal electromagnetic radiation impacting nearby machine control systems;
—          corrosion causing electric cables to overheat.
This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic).
NOTE 2    See also ISO 12100 for design principles related to the safety of machinery.
This document is not applicable to safety related parts of control systems manufactured before the date of its publication.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25119-3:2023/A1:2023(Amendment)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software - Amendment 1 (ISO 25119-3:2018/Amd 1:2020)
SIST EN ISO 25119-3:2023/A1:2023
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25119-1:2023(Main)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018)
SIST EN ISO 25119-1:2023

This document sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (e.g. street-sweeping machines).
This document is not applicable to:
—          aircraft and air-cushion vehicles used in agriculture;
—          lawn and garden equipment.
This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications.
NOTE 1    Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer.
This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards, unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protective measures, safeguards, or safety-related functions in response to non-E/E/PES hazards.
Examples included within the scope of this document:
—          SRP/CS limiting current flow in electric hybrids to prevent insulation failure/shock hazards;
—          electromagnetic interference with the SRP/CS;
—          SRP/CS designed to prevent fire.
Examples not included in the scope of this document:
—          insulation failure due to friction that leads to electric shock hazards;
—          nominal electromagnetic radiation impacting nearby machine control systems;
—          corrosion causing electric cables to overheat.
This document is not applicable to non-E/E/PES systems (e.g. hydraulic, mechanic or pneumatic).
NOTE 2    See also ISO 12100 for design principles related to the safety of machinery.
This document is not applicable to safety related parts of control systems manufactured before the date of its publication.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4254-1:2015/A1:2021(Amendment)
Agricultural machinery - Safety - Part 1: General requirements - Amendment 1 (ISO 4254-1:2013/Amd 1:2021)
SIST EN ISO 4254-1:2016/A1:2022

2021-11-08 JF:via decision BT C204/2021, taken on 2021-11-03, CEN/BT approved  revised Annex ZA of the EN. EN under publication.
2021-02-18 JF: at the meeting held on 2021-02-17 with French Authorities, HAS Consultant and ISO and CEN representatives the LoC assessment at 2nd FV was resolved
2021-02-01 TAN: The ballot is put on hold in ISO. Ballot cancelled in CEN.
2021-01-06 JF: through decision C224/2020, CEN/BT approved the 2nd vote
2020-07-10 JF: CEN and ISO/TCs intend to have a 2nd vote in order to address LoC assessment as the changes are technical. CCMC asked CEN/TC to launch the ballot on 2nd vote.
2020-06-30 JF: CEN/TC Secretariat informed about the need to revise the Annex ZA in order to address the concerns of market surveillance authorites. The Annex ZA is intended to be revised after the publication of ISO standard

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17344:2020(Main)
Agricultural machinery - Self-propelled agricultural and forestry vehicles - Requirements for braking
SIST EN 17344:2020

This document applies to wheeled and/or track-laying self-propelled agricultural and forestry vehicles when used on public roads. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this document:
-   coupling force control;
-   endurance braking systems;
-   Anti-Lock Braking Systems and EBS;
-   vacuum braking systems;
-   safety related parts of complex electronic control systems;
-   trailer braking control systems.
NOTE   For assisted trailer braking the EU Regulation 2015/68 can be used but before including these requirements into this document, an additional review of 2015/68 is needed.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12965:2019(Main)
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
SIST EN 12965:2020

This document specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking a tractor or self-propelled machinery to the first fixed bearing of recipient machinery. It describes methods for the elimination or reduction of risks which need specific requirements including such risks arising from misuse, reasonably foreseeable by the manufacturer. It is applicable only to those PTO drive shafts and guards mechanically linked to the shaft by at least two bearings.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This document does not deal with:
-   the guards totally covering, but not mechanically linked to, the PTO drive shaft;
-   the mechanical characteristics of PTO drive shafts, overrun devices and torque limiters;
-   general hazards which are dealt with in EN ISO 4254-1:2015 (see introduction).
Environmental aspects have not been considered in this document.
This document is not applicable to PTO drive shafts and their guards which are manufactured before the date of publication of this document by CEN.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day