EN 2076-1:1989/A1:1993
(Amendment)Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 1: General requirements
Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 1: General requirements
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)
Luft- und Raumfahrt - Blöcke und Gußstücke aus Aluminium- und Magnesiumlegierungen - Technische Lieferbedingungen - Teil 1: Allgemeine Anforderungen
Série aérospatiale - Lingots et pièces moulées en alliages d'aluminium et de magnésium - Spécification technique - Partie 1: Exigences générales
Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 1: General requirements
General Information
- Status
- Published
- Publication Date
- 29-Jul-1993
- Withdrawal Date
- 30-Jan-1994
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 4 - Metallic
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 30-Jul-1993
- Completion Date
- 30-Jul-1993
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 2076-1:1989/A1:1993 is a CEN aerospace series technical specification titled Aluminium and magnesium alloy ingots and castings - Part 1: General requirements. Adopted in multiple national versions (for example SIST EN 2076-1:2001/A1:2001), this standard sets out the overarching general requirements that apply to aluminium alloy ingots and magnesium alloy castings used in aerospace applications. It establishes baseline expectations for material control, documentation, inspection and delivery for manufacturers, suppliers and purchasers in the aerospace supply chain.
Key Topics
The standard addresses high-level technical and quality aspects relevant to aluminium and magnesium alloy ingots and castings, including:
- Material designation and traceability: identification, marking and documentation required to ensure provenance of aluminium alloy ingots and magnesium alloy castings.
- Chemical composition and conformity: requirements and assessment procedures to confirm alloy chemistry meets specified grades.
- Mechanical properties and condition: general expectations for strength, hardness and heat-treatment condition where applicable.
- Dimensional and surface requirements: acceptable tolerances, surface condition and criteria for castings and ingots intended for aerospace use.
- Sampling and testing: guidance on representative sampling, inspection methods and test documentation to demonstrate compliance.
- Delivery and packaging: requirements for safe transport, storage and labelling of ingots and castings to preserve quality.
- Quality assurance and documentation: required certificates, inspection reports and conformity records to support procurement and certification.
(Note: EN 2076-1 defines general requirements; technical limits, specific alloy compositions and detailed test methods are covered in complementary specifications or material-specific parts.)
Applications
EN 2076-1 is intended for organizations involved in the production, procurement and use of aerospace-grade metal feedstock:
- Aerospace manufacturers and OEMs selecting aluminium alloy ingots and magnesium alloy castings for structural parts, housings and components.
- Foundries and metal suppliers preparing castings and ingots to aerospace technical specifications.
- Material engineers, metallurgists and quality managers implementing incoming inspection and traceability programs.
- Procurement specialists and certification bodies who require standard-compliant documentation and conformity evidence.
Related Standards
EN 2076-1 is Part 1 (general requirements) of the aerospace series for aluminium and magnesium ingots and castings. It is typically used alongside:
- Material- or alloy-specific standards and specifications for chemical limits and mechanical property values.
- Other aerospace material standards and national adoptions (e.g., referenced CEN and national institute publications).
Keywords: EN 2076-1, aluminium alloy ingots, magnesium alloy castings, aerospace standard, technical specification, general requirements, material traceability, quality assurance.
Get Certified
Connect with accredited certification bodies for this standard
DEKRA North America
DEKRA certification services in North America.
Eagle Registrations Inc.
American certification body for aerospace and defense.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
EN 2076-1:1989/A1:1993 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 1: General requirements". This standard covers: 2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)
EN 2076-1:1989/A1:1993 is classified under the following ICS (International Classification for Standards) categories: 49.025.20 - Aluminium. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 2076-1:1989/A1:1993 has the following relationships with other standards: It is inter standard links to EN 2076-1:1989. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 2076-1:1989/A1:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2001
Aerospace series - Aluminium and magnesium alloy ingots and castings -
Technical specification - Part 1: General requirements
Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical
specification - Part 1: General requirements
Luft- und Raumfahrt - Blöcke und Gußstücke aus Aluminium- und
Magnesiumlegierungen - Technische Lieferbedingungen - Teil 1: Allgemeine
Anforderungen
Série aérospatiale - Lingots et pieces moulées en alliages d'aluminium et de magnésium
- Spécification technique - Partie 1: Exigences générales
Ta slovenski s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...