EN ISO 7047:1994

Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)

Specifies the characteristics of countersunk raised head screws of product grade A, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Linsen-Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Z - Produktklasse A (ISO 7047:1994)

Diese Norm enthält Festlegungen über Linsen-Senkschrauben mit Kreuzschlitz, in Produktklasse A, mit Gewinde von M 1,6 bis M 10. Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Vis à métaux à tête fraisée bombée à empreinte cruciforme de type H ou de type Z - Grade A (ISO 7047:1994)

La présente Norme internationale prescrit les caractéristiques des vis à métaux à tête fraisée bombée à empreinte cruciforme de type H ou de type Z, de filetage M1,6 à M10 inclus et de grade A. Si dans des cas particuliers, des spécifications autres que celles figurant dans la présente Norme internationale sont requises, il est recommandé de les prendre dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898-1, ISO 965-2 et ISO 3506.

Vijaki z lečasto ugrezno glavo in križno zarezo - Razred izdelave A

General Information

• Status: Withdrawn
• Publication Date: 30-Jul-1994
• Withdrawal Date: 31-Aug-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 7047:1996 - Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)

Relations

• Replaced By: EN ISO 7047:2011 - Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
• Effective Date: 10-Sep-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7047:1996
01-april-1996
9LMDNL]OHþDVWRXJUH]QRJODYRLQNULåQR]DUH]R5D]UHGL]GHODYH$
Countersunk raised head screws (common head style) with type H or type Z cross
recess - Product grade A (ISO 7047:1994)
Linsen-Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Z - Produktklasse A
(ISO 7047:1994)
Vis a métaux a tete fraisée bombée a empreinte cruciforme de type H ou de type Z -
Grade A (ISO 7047:1994)
Ta slovenski standard je istoveten z: EN ISO 7047:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 7047:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7047:1996

---------------------- Page: 2 ----------
...