SIST EN ISO 7047:1996

Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)

This International Standard specifies the characteristics of cross recessed raised countersunk head screws of product grade A and with thread sizes from M 1,6 to M 10 inclusive. If other specifications are required, they should be selected from existing International Standards, for example ISO 262, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Linsen-Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Z - Produktklasse A (ISO 7047:1994)

Diese Norm enthält Festlegungen über Linsen-Senkschrauben mit Kreuzschlitz, in Produktklasse A, mit Gewinde von M 1,6 bis M 10. Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Vis a métaux a tete fraisée bombée a empreinte cruciforme de type H ou de type Z - Grade A (ISO 7047:1994)

La présente norme internationale spécifie les caractéristiques des vis a métaux a tete fraisée bombée a empreinte cruciforme, de grade A et de diametre nominal de filetage M 1,6 a M 10 inclus.  Si d'autres spécifications sont requises, on devrait les choisir dans les normes internationales existantes, par exemple ISO 262, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Vijaki z lečasto ugrezno glavo in križno zarezo - Razred izdelave A

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1996
• Withdrawal Date: 12-Oct-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-Oct-2011
• Due Date: 04-Nov-2011
• Completion Date: 13-Oct-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 7047:1994 - Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)

Relations

• Replaced By: SIST EN ISO 7047:2011 - Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
• Effective Date: 01-Dec-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7047:1996
01-april-1996
9LMDNL]OHþDVWRXJUH]QRJODYRLQNULåQR]DUH]R5D]UHGL]GHODYH$
Countersunk raised head screws (common head style) with type H or type Z cross
recess - Product grade A (ISO 7047:1994)
Linsen-Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Z - Produktklasse A
(ISO 7047:1994)
Vis a métaux a tete fraisée bombée a empreinte cruciforme de type H ou de type Z -
Grade A (ISO 7047:1994)
Ta slovenski standard je istoveten z: EN ISO 7047:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 7047:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7047:1996

---------------------- Page: 2 ----------
...