prEN ISO 1172
(Main)Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022)
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022)
Gives two calcination methods for the determination of the textile-glass and mineral-filler content of glass-reinforced plastics. Method A is used for the determination of the textile-glass content when no mineral fillers are present; method B is used when both components are present. Replaces the first edition.
Textilglasverstärkte Kunststoffe - Prepregs, Formmassen und Laminate - Bestimmung des Textilglas- und Mineralfüllstoffgehalts - Kalzinierungsverfahren (ISO/DIS 1172:2022)
Plastiques renforcés de verre textile - Préimprégnés, compositions de moulage et stratifiés - Détermination des taux de verre textile et de charge minérale - Méthodes par calcination (ISO/DIS 1172:2022)
S stekleno tkanino ojačeni polimerni materiali - Prepregi, zmesi za oblikovanje in laminati - Določevanje steklene tkanine in mineralnih polnil - Metoda s sežigom (ISO/DIS 1172:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 1172:2022
01-december-2022
S stekleno tkanino ojačeni polimerni materiali - Prepregi, zmesi za oblikovanje in
laminati - Določevanje steklene tkanine in mineralnih polnil - Metoda s sežigom(ISO/DIS 1172:2022)
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates -
Determination of the textile-glass and mineral-filler content - Calcination methods
(ISO/DIS 1172:2022)Textilglasverstärkte Kunststoffe - Prepregs, Formmassen und Laminate - Bestimmung
des Textilglas- und Mineralfüllstoffgehalts - Kalzinierungsverfahren (ISO/DIS 1172:2022)
Plastiques renforcés de verre textile - Préimprégnés, compositions de moulage etstratifiés - Détermination des taux de verre textile et de charge minérale - Méthodes par
calcination (ISO/DIS 1172:2022)Ta slovenski standard je istoveten z: prEN ISO 1172
ICS:
83.120 Ojačani polimeri Reinforced plastics
oSIST prEN ISO 1172:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 1172:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 1172:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1172
ISO/TC 61/SC 13 Secretariat: JISC
Voting begins on: Voting terminates on:
2022-10-19 2023-01-11
Textile-glass-reinforced plastics — Prepregs, moulding
compounds and laminates — Determination of the textile-
glass and mineral-filler content — Calcination methods
Plastiques renforcés de verre textile — Préimprégnés, compositions de moulage et stratifiés —
Détermination des taux de verre textile et de charge minérale — Méthodes par calcination
ICS: 83.120This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1172:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 1172:2022
ISO/DIS 1172:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1172
ISO/TC 61/SC 13 Secretariat: JISC
Voting begins on: Voting terminates on:
Textile-glass-reinforced plastics — Prepregs, moulding
compounds and laminates — Determination of the textile-
glass and mineral-filler content — Calcination methods
Plastiques renforcés de verre textile — Préimprégnés, compositions de moulage et stratifiés —
Détermination des taux de verre textile et de charge minérale — Méthodes par calcination
ICS: 83.120This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONALbe reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION ASor ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL ANDISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 1172:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 1172:2022
ISO/DIS 1172:2022(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction .................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ..................................................................................................................................................................................... 1
3 Terms and definitions .................................................................................................................................................................................... 2
4 Principle ........................................................................................................................................................................................................................ 2
5 Sampling ....................................................................................................................................................................................................................... 2
6 Preparation of test specimens .............................................................................................................................................................. 2
7 Determination ........................................................................................................................................................................................................ 3
7.1 Method A ...................................................................................................................................................................................................... 3
7.2 Method B ...................................................................................................................................................................................................... 4
8 Precision ....................................................................................................................................................................................................................... 7
9 Test report .................................................................................................................................................................................................................. 7
Annex A (informative) Alternative method of separating chopped glass fibre from mineral
filler ................................................................................................................................................................................................................................... 8
iii© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 1172:2022
ISO/DIS 1172:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13,
Composites and reinforcement fibres.This third edition cancels and replaces the second edition (ISO 1172:1996), which has been technically
revised.The main changes are as follows:
— xxx xxxxxxx xxx xxxx
A list of all parts in the ISO ##### series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 1172:2022
ISO/DIS 1172:2022(E)
Introduction
The International Organization for Standardization (ISO) draws attention to the fact that it is claimed
that compliance with this document may involve the use of a patent.ISO takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO that he/she is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In
this respect, the statement of the holder of this patent right is registered with ISO. Information may be
obtained from the patent database available at www.iso.org/patents.Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those in the patent database. ISO shall not be held responsible for identifying
any or all such patent rights.© ISO 2022 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 1172:2022
---------------------- Page: 8 ----------------------
oSIST prEN ISO 1172:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 1172:2022(E)
Textile-glass-reinforced plastics — Prepregs, moulding
compounds and laminates — Determination of the textile-
glass and mineral-filler content — Calcination methods
WARNING — This International Standard does not give details of the precautions that should be
taken to meet health and safety requirements. The test methods described require the use of
high temperatures and concentrated acids. It is the responsibility of the user of this International
Standard to follow the appropriate health and safety procedures.1 Scope
This International Standard specifies two calcination methods for the determination of the textile glass
and mineral filler content of glass-reinforced plastics:Method A: for the determination of the textile glass content when no mineral fillers are present.
Method B: for the determination of the textile-glass and mineral-filler content when both
components are present.This International Standard is applicable to the following types of material:
— Prepregs made from yarns, rovings, tapes or fabrics;
— SMC, BMC and DMC moulding compounds;
— textile-glass-reinforced thermoplastic moulding materials and granules;
— filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins.
The methods are not applicable to the following types of reinforced plastic:— those containing reinforcements other than textile glass;
— those containing materials which do not completely burn off at the test temperature (for example,
those based on silicone resin);— those containing mineral fillers which degrade at temperatures below the minimum calcination
temperature.For these materials, ISO 11667, Fibre-reinforced plastics - Moulding compounds and prepregs
-Determination of resin, reinforcement-fibre and mineral-filler content - Dissolution method, may be used.
2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 472, Plastics — VocabularyISO 4793, Laboratory sintered (fritted) filters — Porosity grading, classification and designation
ISO 8604, Plastics — Prepregs — Definitions of terms and symbols for designations
© ISO 2022 – All rights reserved---------------------- Page: 9 ----------------------
oSIST prEN ISO 1172:2022
ISO/DIS 1172:2022(E)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 472 and ISO 8604 apply.
4 PrincipleA test specimen is weighed and subsequently calcinated at a defined temperature. The specimen is
then reweighed and the non combustible matter content (glass + filler) obtained by determining the
difference in mass of a test specimen before and after calcination in one of the following ways:
a) In the case of materials containing no fillers the glass content is calculated directly from the
difference in mass (method A);b) In the case of materials containing both glass and filler, the glass and filler remaining after
calcination are separated by dissolution of the filler in hydrochloric acid. The difference between
the mass of the specimen before calcination and the mass of the dried specimen after reaction
with acid is used to measure the glass content. The filler content is obtained by calculating the
difference between the mass of the specimen after calcination and the mass of the dried spec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.