Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses

This standard specifies the required characteristics of saddle clamps in aluminium alloy with various cushion materials.
These clamps, fixed version (type 1) or sliding version (type 2), are used for supporting pipe assemblies.
They are used up to 80 °C max. .
Usage at a higher tempera-ture is at the option of the user.
For temperature range and environmental considerations see the various cushion material standards.

Luft- und Raumfahrt - Schellen in Sattelform aus Aluminiumlegierung mit Profilgummi für feste und gleitende Rohrhalterung - Maße, Massen

Diese Norm legt die Anforderungen an Schellen in Sattelform aus Aluminiumlegierung mit verschiedenen Profilgummi-Werkstoffen fest.
Diese Schellen, die es in fester Ausführung (Typ 1) und gleitender Ausführung (Typ 2) gibt, werden als Halterung für Rohrleitungen verwendet.
Sie werden bis zu einer Temperatur von max. 80 °C verwendet.
Die Verwendung bei höherer Temperatur erfolgt nach Wahl des Anwenders.
Temperaturbereich und Umweltbedingungen entsprechen den Angaben in den jeweiligen Werkstoffnormen für Profilgummi.

Série aérospatiale - Colliers du type "Oméga" avec serrage ou coulissants en alliage d'aluminium avec profilé en élastomère - Dimensions, masses

Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses

General Information

Status
Withdrawn
Publication Date
18-Sep-2001
Withdrawal Date
22-Sep-2009
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Sep-2009
Completion Date
23-Sep-2009

Relations

Buy Standard

Standard
EN 3730:2002
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3730:2002
01-januar-2002
Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy
with rubber cushioning - Dimensions, masses
Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with
rubber cushioning - Dimensions, masses
Luft- und Raumfahrt - Schellen in Sattelform aus Aluminiumlegierung mit Profilgummi für
feste und gleitende Rohrhalterung - Maße, Massen
Série aérospatiale - Colliers du type "Oméga" avec serrage ou coulissants en alliage
d'aluminium avec profilé en élastomere - Dimensions, masses
Ta slovenski standard je istoveten z: EN 3730:2001
ICS:
49.025.20 Aluminij Aluminium
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 3730:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3730:2002

---------------------- Page: 2 ----------------------

SIST EN 3730:2002
EUROPEAN STANDARD
EN 3730
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 49.080
English version
Aerospace series - Clamps, saddle fixed and sliding version in
aluminium alloy with rubber cushioning - Dimensions, masses
This European Standard was approved by CEN on 20 January 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3730:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3730:2002
EN 3730:2001 (E)
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2002, and conflicting national standards shall be withdrawn at
the latest by March 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 3730:2002
EN 3730:2001 (E)
1 Scope
This standard specifies the required characteristics of saddle clamps in aluminium alloy with various cushion
materials.
These clamps, fixed version (type 1) or sliding version (type 2), are used for supporting pipe assemblies.
They are used up to 80 C max. .
Usage at a higher temperature is at the option of the user.
For temperature range and environmental considerations see the various cushion material standards.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to
this European Standard only when incoporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies (including amendments).
EN 2000 Aerospace series – Quality assurance – EN aerospace products – Approval of the
quality system of manufacturers
EN 2261 Aerospace series – Silicone rubber (VMQ) – Hardness 70 IRHD
EN 2424 Aerospace series – Marking of aerospace products
EN 2437 Aerospace series – Chromate conversion coatings (yellow) for aluminium and
aluminium alloy
1)
EN 2566 Aerospace series – Fluorocarbon rubber (FPM) – Hardness 70 IRHD
EN 2693 Aerospace series – Aluminium alloy AL-P5086- H 111 – Sheet and strip
0,3 mm  a  6 mm
EN 3078 Aerospace series – P.Q and saddle clamps with rubber cushion – Technical
1)
specification
2)
EN 3826 Aerospace series – Fluorosilicone rubber (FVMQ) – Hardness 70 IRHD
EN 4115 Aerospace series – Cushion, rubber for clamps – Dimensions, masses

1)
Published as AECMA Prestandard at the date of publication of this standard
2)
 In preparation at the date of publication of this standard
3

------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.