EN 4612-008:2011

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard

This standard specifies the characteristics of UV laser printable jacket, silver plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer (XLETFE) family for use in the on-board electrical systems of aircraft at operating temperatures between - 65 °C and 150 °C, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. These cables are suitable for airframe use without additional protection when the jacket is present. When the jacket is stripped back the cores may need additional protection. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.

Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen zur allgemeinen Verwendung, XLETFE Familie, ummantelt oder geschirmt und ummantelt - Teil 008: Kupfer versilbert, Betriebstemperaturen zwischen -65 °C und 150 °C, einfach extrudierte Isolierung für offene Anwendungen, ummantelt und geschirmt (Geflecht), UV-Laser bedruckbar - Produktnorm

Diese Europäische Norm legt die Eigenschaften von elektrischen Leitungen aus der XLETFE-Familie (quer-vernetztes Ethylen-Tetrafluorethylen-Co-Polymer) mit UV-Laser bedruckbarem Mantel und versilbertem Kupferleiter zur Verwendung in elektrischen Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen -65 °C und 150 °C, Betriebsspannungen mit einem Effektivwert bis 600 V und Frequenzen von maximal 2 000 Hz fest. Diese Leitungen sind für die Verlegung in Luftfahrzeugzellen ohne Zusatzschutz geeignet, wenn der Mantel vorhanden ist. Bei abgezogenem Mantel benötigen die Adern unter Umständen einen Zusatzschutz. Bei Widersprüchen zwischen dieser Norm und anderen zitierten Dokumenten gelten die Anforde¬rungen dieser Norm.

Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Gainés ou blindés et gainés - Partie 008: Cuivre argenté - Températures de fonctionnement comprises entre - 65 °C et 150 °C - Fil simple isolé pour applications externes, gainé et blindé (tressé) - Marquable au laser UV - Norme de produit

Aeronavtika - Kabli, električni, za splošne namene, eno- in večžilni - Družina XLETFE - Oplaščeni ali zaslonjeni in oplaščeni - 008. del: Posrebreni baker - Obratovalne temperature med –65 °C in 150 °C - Enojno ekstrudirana izolacija za zunanjo uporabo, s plaščem in zaslonom (pletenica) - Možnost UV-laserskega tiskanja - Standard za izdelek

Ta standard določa značilnosti električnih kablov iz družine zamreženega etilen-tetrafluoretilen kopolimera (XLETFE) s prevodnikom iz posrebrenega bakra, s plaščem z možnostjo UV-laserskega potiska za uporabo v električnih sistemih na krovu zračnega plovila pri obratovalnih temperaturah med -65 °C in 150 °C, delujočih pri napetostih, ki ne presegajo 600 V r.m.s, in frekvencah, ki ne presegajo 2000 Hz. Ti kabli so primerni za uporabo v ogrodjih zrakoplovov brez dodatne zaščite, če imajo plašč. Če je plašč olupljen, je lahko potrebna dodatna zaščita jeder. Ob neskladju med tem standardom in drugimi referenčnimi dokumenti imajo zahteve tega standarda prednost.

General Information

• Status: Withdrawn
• Publication Date: 18-Oct-2011
• Withdrawal Date: 27-Aug-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Aug-2019
• Ref Project: SIST EN 4612-008:2011 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard

Relations

• Replaced By: EN 4612-008:2019 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• Effective Date: 04-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4612-008:2011
01-december-2011
$HURQDYWLND.DEOLHOHNWULþQL]DVSORãQHQDPHQHHQRLQYHþåLOQL'UXåLQD
;/(7)(2SODãþHQLDOL]DVORQMHQLLQRSODãþHQLGHO3RVUHEUHQLEDNHU
2EUDWRYDOQHWHPSHUDWXUHPHG±ƒ&LQƒ&(QRMQRHNVWUXGLUDQDL]RODFLMD]D
]XQDQMRXSRUDERVSODãþHPLQ]DVORQRPSOHWHQLFD0RåQRVW89ODVHUVNHJD
WLVNDQMD6WDQGDUG]DL]GHOHN
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly
XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper -
Operating temperatures, between - 65 °C and 150 °C - single extruded wall for open
applications, with jacket and screen (braid) - UV laser printable - Product standard
Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine
Verwendung - XLETFE Familie - Mit Mantel oder geschirmt und Mantel - Teil 008: Kupfer
versilbert - Betriebstemperaturen zwischen – 65 °C und 150 °C - Einfach extrudierte
Isolierung für externe Verwendung, mit Mantel und Schirm (Geflecht) - UV-Laser
bedruckbar - Produktnorm
Série aérospatiale -Câbles, électriques, d'usage général, mono et multiconducteurs -
Famille XLETFE - Gainés ou blindés et gainés - Partie 008 : Cuivre argenté -
Températures de fonctionnement comprises entre – 65 °C et 150 °C - Fil simple isolé
pour applications externes, gainé et blindé (tressé) - Marquable au laser UV - Norme de
produit
Ta slovenski standard je istoveten z: EN 4612-008:2011
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4612-008:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4612-008:2011

---------------------- Page: 2 ----------------------

SIST EN 4612-008:2011


EUROPEAN STANDARD
EN 4612-008

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2011
ICS 49.060
English Version
Aerospace series - Cables, electrical, for general purpose,
single and multicore assembly XLETFE Family jacketed or
screened and jacketed - Part 008: Silver plated copper -
Operating temperatures, between - 65 °C and 150 °C - single
extruded wall for open applications, with jacket and screen
(braid) - UV laser printable - Product standard
Série aérospatiale -Câbles, électriques, d'usage général, Luft- und Raumfahrt - Ein- und mehradrige elektrische
mono et multiconducteurs - Famille XLETFE - Gainés ou Leitungen für allgemeine Verwendung - XLETFE Familie -
blindés et gainés - Partie 008: Cuivre argenté - Mit Mantel oder geschirmt und Mantel - Teil 008: Kupfer
Températures de fonctionnement comprises entre - 65 °C versilbert - Betriebstemperaturen zwischen - 65 °C und 150
et 150 °C - Fil simple isolé pour applications externes, °C - Einfach extrudierte Isolierung für externe Verwendung,
gainé et blindé (tressé) - Marquable au laser UV - Norme mit Mantel und Schirm (Geflecht) - UV-Laser bedruckbar -
de produit Produktnorm
This European Standard was approved by CEN on 20 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4612-008:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4612-008:2011
EN 4612-008:2011 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .
...