EN 3475-811:2009

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation

This standard specifies methods for measuring unbalance attenuation signal in common mode converted into differential mode caused by the characteristics of symmetry of transmission cables. Terms relative to this attenuation are defined in Clause 3.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 811: Unsymmetriedämpfung

Série aérospatiale - Câbles électriques à usage aéronautique - Méthode d'essai - Partie 811: Affaiblissement de dissymétrie

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 811. del: Neenakomerno slabljenje

General Information

• Status: Published
• Publication Date: 10-Mar-2009
• Withdrawal Date: 29-Sep-2009
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3475-811:2009 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation

Relations

• Revised: prEN 3475-811 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 811: UnsymmetriedämpfungSérie aérospatiale - Câbles électriques à usage aéronautique - Méthode d'essai - Partie 811: Affaiblissement de dissymétrieAerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-811:2009SIST EN 3475-811:2009en01-junij-2009SIST EN 3475-811:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-811March 2009ICS 49.060 English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 811: Unbalance attenuationSérie aérospatiale - Câbles électriques à usageaéronautique - Méthode d'essai - Partie 811:Affaiblissement de dissymétrieLuft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 811:UnsymmetriedämpfungThis European Standard was approved by CEN on 30 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-811:2009: ESIST EN 3475-811:2009
...