EN ISO 16809:2019

Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)

ISO 16809:2017 specifies the principles for ultrasonic thickness measurement of metallic and non-metallic materials by direct contact, based on measurement of time of flight of ultrasonic pulses only.

Zerstörungsfreie Prüfung - Dickenmessung mit Ultraschall (ISO 16809:2017)

Dieses Dokument legt die Grundlagen für die Messung der Dicke metallischer und nicht metallischer Werkstoffe mit Ultraschall durch unmittelbaren Kontakt mit dem Prüfgegenstand fest, ausschließlich basierend auf der Messung der Laufzeit von Ultraschallimpulsen.

Essais non destructifs - Mesurage de l'épaisseur par ultrasons (ISO 16809:2017)

Le présent document spécifie les principes pour le mesurage de l'épaisseur par ultrasons de matériaux métalliques et non métalliques par contact direct, exclusivement basés sur la mesure du temps de vol d'impulsions ultrasonores.

Neporušitvene preiskave - Ultrazvočno merjenje debeline (ISO 16809:2017)

Standard ISO 16809:2017 določa načela za ultrazvočno merjenje debeline kovinskih in nekovinskih materialov z neposrednim stikom, in sicer samo na podlagi merjenja časa preleta ultrazvočnih impulzov.

General Information

• Status: Published
• Publication Date: 04-Jun-2019
• Withdrawal Date: 30-Dec-2019
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 2 - Ultrasonic testing
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Jun-2019
• Due Date: 10-Feb-2021
• Completion Date: 05-Jun-2019
• Ref Project: SIST EN ISO 16809:2019 - Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)

Relations

• Replaces: EN 14127:2011 - Non-destructive testing - Ultrasonic thickness measurement
• Effective Date: 29-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 14127:2011
Neporušitvene preiskave - Ultrazvočno merjenje debeline (ISO 16809:2017)
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
Zerstörungsfreie Prüfung - Dickenmessung mit Ultraschall (ISO 16809:2017)
Essais non destructifs - Mesurage de l'épaisseur par ultrasons (ISO 16809:2017)
Ta slovenski standard je istoveten z: EN ISO 16809:2019
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 16809
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 19.100 Supersedes EN 14127:2011
English Version
Non-destructive testing - Ultrasonic thickness
measurement (ISO 16809:2017)
Essais non destructifs - Mesurage de l'épaisseur par Zerstörungsfreie Prüfung - Dickenmessung mit
ultrasons (ISO 16809:2017) Ultraschall (ISO 16809:2017)
This European Standard was approved by CEN on 8 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16809:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 16809:2017 has been prepared by Technical Committee ISO/TC 135 "Non-destructive
testing” of the International Organization for Standardization (ISO) and has been taken over as
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14127:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16809:2017 has been approved by CEN as EN ISO 16809:2019 without any modification.

INTERNATIONAL ISO
STANDARD 16809
Second edition
2017-11
Non-destructive testing — Ultrasonic
thickness measurement
Essais non destructifs — Mesurage de l'épaisseur par ultrasons
Reference number
ISO 16809:2017(E)
©
ISO 2017
ISO 16809:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 16809:2017(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measurement modes . 1
5 General requirements . 3
5.1 Instruments . 3
5.2 Probes . 3
5.3 Couplant . 3
5.4 Reference blocks . 3
5.5 Test objects . 3
5.6 Qualification of personnel . 4
6 Application of the technique . 4
6.1 Surface conditions and surface preparation . 4
6.2 Technique . 4
6.2.1 General. 4
6.2.2 Measurement during manufacture . 5
6.2.3 In-service measurement of residual wall thickness . 5
6.3 Selection of probe . 6
6.4 Selection of instrument . 6
6.5 Materials different from the reference material . 6
6.6 Special measuring conditions . 7
6.6.1 General. 7
6.6.2 Measurements at temperatures below 0 °C . 7
6.6.3 Measurements at elevated temperatures . 7
6.6.4 Hazardous atmospheres . . 7
7 Instrument setting . 7
7.1 General . 7
7.2 Methods of setting . 8
7.2.1 General. 8
7.2.2 Digital thickness instruments . 8
7.2.3 A-scan instrument . 8
7.3 Checks of settings . 9
8 Influence on accuracy .10
8.1 Operational conditions.10
8.1.1 Surface conditions .10
8.1.2 Surface temperature .10
8.1.3 Metallic coating .11
8.1.4 Non-metallic coating .11
8.1.5 Geometry .12
8.2 Equipment .12
8.2.1 Resolution .12
8.2.2 Range .13
8.3 Evaluation of accuracy .13
8.3.1 General.13
8.3.2 Influencing parameters .14
8.3.3 Method of calculation .14
9 Influence of materials .
...