EN 3645-005:2019

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard

This European Standard specifies the characteristics of round flange hermetic receptacles, mounted by soldering, in the family of circular electrical connectors with triple start threaded coupling.
It applies to models in Table 3.
The contacts are unremovable and soldered termination.
For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011, and EN 3645-012 respectively.
These connectors are derived from and interchangeable with model Y in specification MIL DTL 38999/25

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 005: Hermetischer fester Steckverbinder mit rundem Schweißflansch - Produktnorm

Diese Europäische Norm legt die Eigenschaften von hermetischen festen Steckverbindern mit rundem Schweißflansch in der Familie der elektrischen Rundsteckverbinder mit dreigängiger Gewinde Schnell-kupp¬lung fest.
Sie gilt für die in Tabelle 3 angegebenen Bauformen.
Die Kontakte sind nicht lösbar und haben einen Lötanschluss.
Hinsichtlich der freien Steckverbinder und Schutzkappen siehe EN 3645 006, EN 3645 008, EN 3645 011 und EN 3645 012.
Diese Steckverbinder wurden von der Bauform Y in der Spezifikation MIL DTL 38999/25 abgeleitet und sind mit dieser austauschbar.

Série aérospatiale - Connecteurs électriques circulaires à contacts protégés, à accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou 200 °C continu - Partie 005 : Embase hermétique à collerette ronde à fixation par brasage - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, zaščiten kontakt, hitra spojka z navojem, stalna delovna temperatura 175 °C ali 200 °C - 005. del: Podlaga, hermetična, z okroglo prirobnico, privarjena - Standard za proizvod

Ta evropski standard določa značilnosti hermetičnih spojnikov s privarjeno okroglo prirobnico
iz družine okroglih električnih konektorjev s hitro spojko z navojem.
Uporablja se za modele iz preglednice 3.
Kontakti so neodstranljivi in spajkani priključki.
Za čepe in zaščitna prekrivala glej ustrezne standarde EN 3645-006, EN 3645-008, EN 3645-011 in EN 3645-012.
Ti konektorji izhajajo iz modela Y iz specifikacije MIL-DTL-38999/25 in so medsebojno zamenljivi z njim.

General Information

• Status: Published
• Publication Date: 11-Jun-2019
• Withdrawal Date: 30-Dec-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 12-Jun-2019
• Completion Date: 12-Jun-2019
• Ref Project: SIST EN 3645-005:2019 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard

Relations

• Replaces: EN 3645-005:2006 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, brasage mounting - Product standard
• Effective Date: 19-Jun-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN 3645-005:2009
Aeronavtika - Konektorji, električni, okrogli, zaščiten kontakt, hitra spojka z
navojem, stalna delovna temperatura 175 °C ali 200 °C - 005. del: Podlaga,
hermetična, z okroglo prirobnico, privarjena - Standard za proizvod
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded
coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle,
hermetic, round flange, solder mounting - Product standard
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, drei-gängige
Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 °C oder 200 °C - Teil 005:
Fester Steckverbinder, hermetisch, mit rundem Schweißflansch - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à contacts protégés, à
accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou
200 °C continu - Partie 005 : Embase hermétique à collerette ronde à fixation par
brasage - Norme de produit
Ta slovenski standard je istoveten z: EN 3645-005:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3645-005
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3645-005:2006
English Version
Aerospace series - Connectors, electrical, circular, scoop-
proof, triple start threaded coupling, operating
temperature 175 °C or 200 °C continuous - Part 005:
Receptacle, hermetic, round flange, solder mounting -
Product standard
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder,
à contacts protégés, à accouplement par filetage à pas kontaktgeschützt, dreigängige Gewinde-
rapide à trois filets, températures d'utilisation 175 °C Schnellkupplung, Betriebstemperatur 175 °C oder 200
ou 200 °C continu - Partie 005 : Embase hermétique à °C konstant - Teil 005: Hermetischer fester
collerette ronde à fixation par brasage - Norme de Steckverbinder mit rundem Schweißflansch -
produit Produktnorm
This European Standard was approved by CEN on 2 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, North
Macedonia, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3645-005:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation . 7
6 Marking . 8
7 Technical specification . 8

European foreword
This document (EN 3645-005:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Ser
...