EN ISO 14556:2000/A1:2006

Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces (ISO 14556:2000/Amd 1:2006)

Stahl - Kerbschlagbiegeversuch nach Charpy (V-Kerb) - Instrumentiertes Prüfverfahren - ÄNDERUNG 1: Anhang D - Prüfung von Kleinproben im instrumentierten Kerbschlagbiegeversuch nach Charpy (ISO 14556:2000/Amd 1:2006)

In diesem Anhang sind der instrumentierte Kerbschlagbiegeversuch nach Charpy (V-Kerb) für Kleinproben aus Stahlerzeugnissen sowie die Anforderungen an die Messeinrichtungen und die Auswerteverfahren festgelegt.
Die Anwendung dieser Internationalen Norm für andere metallische Werkstoffe und andere Schlagversuchseinrichtungen, wie Fallwerke oder servohydraulische Hochgeschwindigkeitsprüfmaschinen, kann vereinbart werden.
Mit diesem Versuch können weitergehende Aussagen über das Bruchverhalten des zu prüfenden Erzeugnisses getroffen werden.
Der Anwender wird darauf hingewiesen, dass die Ergebnisse von Kleinproben nicht direkt vergleichbar zu den Ergebnissen von  genormten Charpy-V-Proben sein können und geeignete Korrelationen angewendet werden müssen.

Aciers - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté - Amendement 1: Annexe D - Essai de flexion par choc instrumenté sur éprouvettes Charpy à entaille en V de dimensions réduites (ISO 14556:2000/Amd 1:2006)

Jeklo – Udarni preskus žilavosti po Charpyju (V-zareza) – Instrumentirana preskusna metoda – Dopolnilo 1: Dodatek D – Instrumentiran udarni preskus žilavosti po Charpyju (V-zareza) za majhne preskušance (ISO 14556:2000/Amd 1:2006)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2006
• Withdrawal Date: 06-Oct-2015
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 1 - Steel - Mechanical testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Oct-2015
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Ref Project: SIST EN ISO 14556:2001/A1:2007 - Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces (ISO 14556:2000/Amd 1:2006)

Relations

• Replaced By: EN ISO 14556:2015 - Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)
• Effective Date: 14-Oct-2015
• Amends: EN ISO 14556:2000 - Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14556:2001/A1:2007
01-januar-2007
Jeklo – Udarni preskus žilavosti po Charpyju (V-zareza) – Instrumentirana
preskusna metoda – Dopolnilo 1: Dodatek D – Instrumentiran udarni preskus
žilavosti po Charpyju (V-zareza) za majhne preskušance (ISO 14556:2000/Amd
1:2006)
Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment
1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
(ISO 14556:2000/Amd 1:2006)
Stahl - Kerbschlagbiegeversuch nach Charpy (V-Kerb) - Instrumentiertes Prüfverfahren -
ÄNDERUNG 1: Anhang D - Prüfung von Kleinproben im instrumentierten
Kerbschlagbiegeversuch nach Charpy (ISO 14556:2000/Amd 1:2006)
Aciers - Essai de flexion par choc sur éprouvette Charpy a entaille en V - Méthode
d'essai instrumenté - Amendement 1: Annexe D - Essai de flexion par choc instrumenté
sur éprouvettes Charpy a entaille en V de dimensions réduites (ISO 14556:2000/Amd
1:2006)
Ta slovenski standard je istoveten z: EN ISO 14556:2000/A1:2006
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.080.20 Jekla Steels
SIST EN ISO 14556:2001/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 14556:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 77.040.10

English Version
Steel - Charpy V-notch pendulum impact test - Instrumented test
method - Amendment 1: Annex D - Instrumented Charpy V-
notch pendulum impact test of sub-size test pieces (ISO
14556:2000/Amd 1:2006)
Aciers - Essai de flexion par choc sur éprouvette Charpy à Stahl - Kerbschlagbiegeversuch nach Charpy (V-Kerb) -
entaille en V - Méthode d'essai instrumenté - Amendement Instrumentiertes Prüfverfahren - ÄNDERUNG 1: Anhang D
1: Annexe D - Essai de flexion par choc instrumenté sur - Prüfung von Kleinproben im instrumentierten
éprouvettes Charpy à entaille en V de dimensions réduites Kerbschlagbiegeversuch nach Charpy (ISO
(ISO 14556:2000/Amd 1:2006) 14556:2000/Amd 1:2006)
This amendment A1 modifies the European Standard EN ISO 14556:2000; it was approved by CEN on 30 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14556:2000/A1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 14556:2000/A1:2006 (E)





Foreword


This document (EN ISO 14556:2000/A1:2006) has been prepared by Technical Committee
ISO/TC 164 "Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC
1 "Steel - Mechanical testing", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2007, and conflicting national
standards shall be withdrawn at the latest by January 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 14556:2000/Amd 1:2006 has been approved by CEN as EN ISO
14556:2000/A1:2006 without any modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 14556
First edition
2000-05-01
AMENDMENT 1
2006-07-01

Steel — Charpy V-notch pendulum impact
test — Instrumented test method
AMENDMENT 1: Annex D — Instrumented
Charpy
...