CEN/TS 16157-1:2011
(Main)Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 1: Context and framework
Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 1: Context and framework
This Technical Specification (CEN/TS 16157-1) specifies and defines component facets required to support the exchange and shared use of data and information in the field of traffic and travel.
The component facets include the framework and context for exchanges, the modelling approach, data content, data structure and relationships, communications specification.
This Technical Specification is applicable to:
- traffic and travel information which is of relevance to road networks (non urban and urban);
- public transport information that is of direct relevance to the use of a road network (e.g. road link via train or ferry service).
This Technical Specification establishes specifications for data exchange between any two instances of the following actors:
- Traffic Information Centres (TICs);
- Traffic Control Centres (TCCs);
- Service Providers (SPs).
Use of this Technical Specification may be applicable for use by other actors.
This Technical Specification covers, at least, the following types of informational content:
- road traffic event information - planned and unplanned occurrences both on the road network and in the surrounding environment;
- operator initiated actions;
- road traffic measurement data, status data, and travel time data;
- travel information relevant to road users, including weather and environmental information;
- road traffic management information and information and advice relating to use of the road network.
This part of CEN/TS 16157 specifies the DATEX II framework of all parts of this Technical Specification, the context of use and the modelling approach taken and used throughout these Technical Specifications. This approach is described using formal methods and provides the mandatory reference framework for all other parts.
Intelligente Transportsysteme - DATEX II Datenaustausch Spezifikationen für Verkehrsmanagement und Informationen - Teil 1: Kontext und Rahmenstruktur
Systèmes de transport intelligents - Spécifications DATEX II d'échange de données pour la gestion du trafic et l'information routière - Partie 1: Contexte et cadre général
La présente Spécification Technique (FprCEN/TS 16157-1) stipule et définit les composantes requises pour la
prise en charge de l'échange et de l'utilisation partagée de données et d'informations aux voyageurs sur la
circulation.
Ces composantes comprennent le cadre et le contexte des échanges, la démarche de modélisation, le
contenu des données, leur structure et leurs relations ainsi que les spécifications de communication.
La présente Spécification Technique est applicable :
⎯ aux informations aux voyageurs sur la circulation qui sont pertinentes pour les réseaux routiers (non
urbains et urbains),
⎯ aux informations sur les transports publics qui sont pertinentes pour l'utilisation d'un réseau routier (par
exemple les liaisons routières via les services ferroviaires et maritimes).
La présente Spécification Technique établit les spécifications d'échange de données ayant lieu entre deux
des acteurs suivants :
⎯ les centres d'information routière (CIR),
⎯ les centres de gestion du trafic (CGT),
⎯ les opérateurs de services (FS),
La présente Spécification Technique peut être utilisée par d'autres acteurs.
La présente Spécification Technique couvre, au moins, les types de contenus d'informations suivants :
⎯ les informations concernant les événements ayant trait au trafic routier - qu'ils aient lieu sur le réseau
routier ou dans son proche environnement, qu'ils soient planifiés ou non,
⎯ les actions effectuées à l'initiative d’un exploitant,
⎯ les données de comptage et d'état du trafic routier et les données de temps de parcours,
⎯ les informations aux voyageurs pertinentes pour les usagers de la route, y compris les informations
météorologiques et environnementales,
⎯ les informations de gestion du trafic routier et les informations et conseils relatifs à l'utilisation du réseau
routier.
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri upravljanju prometa in informiranju - 1. del: Skladnost in okvir
Ta tehnična specifikacija (FprCEN/TS 16157-1) določa in definira vidike komponent, potrebne za podporo izmenjave in skupne uporabe podatkov in informacij na področju prometa in potovanja.
Vidiki komponent vključujejo okvir in kontekst za izmenjave, pristope modeliranja, vsebino podatkov, podatkovne strukture in odnose, specifikacijo komunikacij.
Ta tehnična specifikacija velja za:
- informacije o prometu in potovanju, ki so pomembne za cestna omrežja (neurbana in urbana),
- informacije javnega prevoza, ki so neposredno pomembne za uporabo cestnega omrežja (npr. cestne povezave z železniško ali trajektno storitvijo).
Ta tehnična specifikacija vzpostavlja specifikacije za podatkovno izmenjavo med katero koli izmed instanc naslednjih udeležencev:
- prometnoinformacijski centri (TIC),
- prometnokontrolni centri (TCC),
- ponudniki storitev (SP).
Uporaba te tehnične specifikacije lahko velja, kadar jo uporabljajo drugi udeleženci.
Ta tehnična specifikacija zajema vsaj naslednje vrste informativne vsebine:
- informacije o dogodkih v cestnem prometu – načrtovani in nenačrtovani dogodki na cestnem omrežju in v bližnjem okolju,
- kakor jih sporoča operater sprožene akcije,
- podatke o merjenju cestnega prometa, statusne podatke in podatke o času potovanja,
- potovalne informacije, pomembne za uporabnike cest, vključno z vremenom in okoljskimi informacijami,
- informacije nadzora cestnega prometa ter informacije in nasvete, povezane z uporabo cestnega omrežja.
Ta del FprCEN/TS 16157 določa okvir DATEX II za vse dele te tehnične specifikacije, kontekst uporabe ter izbrani pristop modeliranja, ki se uporablja v teh tehničnih specifikacijah. Ta pristop je opisan z uporabo formalnih metod in zagotavlja obvezen referenčni okvir za vse druge dele.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16157-1:2011
01-november-2011
1DGRPHãþD
SIST ENV 13106:2003
SIST ENV 13777:2003
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri
upravljanju prometa in informiranju - 1. del: Skladnost in okvir
Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 1: Context and framework
Intelligente Verkehrssysteme - DATEX II Datenaustauschspezifikation für
Verkehrsmanagement und Verkehrsinformation - Teil 1: Kontext und Rahmenwerk
Systèmes de transport intelligents - Spécifications DATEX II d'échange de données pour
la gestion du trafic et l'information routière - Partie 1: Contexte et cadre général
Ta slovenski standard je istoveten z: CEN/TS 16157-1:2011
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN/TS 16157-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16157-1:2011
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16157-1:2011
TECHNICAL SPECIFICATION
CEN/TS 16157-1
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2011
ICS 35.240.60 Supersedes ENV 13106:2000, ENV 13777:2000
English Version
Intelligent transport systems - DATEX II data exchange
specifications for traffic management and information - Part 1:
Context and framework
Systèmes de transport intelligents - Spécifications DATEX Intelligente Transportsysteme - DATEX II Datenaustausch
II d'échange de données pour la gestion du trafic et Spezifikationen für Verkehrsmanagement und
l'information routière - Partie 1: Contexte et cadre général Informationen - Teil 1: Kontext und Rahmenstruktur
This Technical Specification (CEN/TS) was approved by CEN on 10 April 2011 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16157-1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16157-1:2011
CEN TS 16157-1:2011
Contents Page
Introduction .5
1 Scope .6
2 Conformance .6
3 Normative references .7
4 Terms and definitions .7
4.1 Terms and definitions adapted from ISO/IEC 19501:2005 .7
4.2 Other terms and definitions .8
5 Symbols and abbreviated terms . 10
6 General conventions and requirements . 10
6.1 Metamodelling . 10
6.2 Naming conventions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.