EN ISO 15741:2021
(Main)Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases (ISO 15741:2016)
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases (ISO 15741:2016)
This document specifies requirements and methods of test for liquid epoxy paints and internal coatings of such paints in steel pipes and fittings for the conveyance of non-corrosive gas. It also deals with the application of the paint. Other paints or paint systems are not excluded provided they comply with the requirements given in this document. The coating consists of one layer, which is normally shop-applied on blast-cleaned steel by airless spray or other suitable spraying techniques. The applied and cured paint film must be smooth to give the desired reduction in friction. Brush application is only used for small repair jobs.
Beschichtungsstoffe - Reibungsreduzierende Beschichtungen für das Innere von Stahlrohrleitungen im On- und Offshore-Bereich für nicht korrosive Gase (ISO 15741:2016)
Peintures et vernis - Revêtements réduisant le frottement pour l'intérieur de gazoducs en acier enterrés et immergés pour le transport de gaz non corrosifs (ISO 15741:2016)
Barve in laki - Premazi za zmanjšanje trenja v notranjosti jeklenih cevovodov na kopnem in na morju za nekorozivne pline (ISO 15741:2016)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15741:2021
01-april-2021
Barve in laki - Premazi za zmanjšanje trenja v notranjosti jeklenih cevovodov na
kopnem in na morju za nekorozivne pline (ISO 15741:2016)
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore
steel pipelines for non-corrosive gases (ISO 15741:2016)
Beschichtungsstoffe - Reibungsreduzierende Beschichtungen für das Innere von
Stahlrohrleitungen im On- und Offshore-Bereich für nicht korrosive Gase (ISO
15741:2016)
Peintures et vernis Revêtements réduisant le frottement pour l'intérieur de gazoducs en
acier enterrés et immergés pour le transport de gaz non corrosifs (ISO 15741:2016)
Ta slovenski standard je istoveten z: EN ISO 15741:2021
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 15741:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15741:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 15741:2021
EN ISO 15741
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2021
EUROPÄISCHE NORM
ICS 87.020
English Version
Paints and varnishes - Friction-reduction coatings for the
interior of on- and offshore steel pipelines for non-
corrosive gases (ISO 15741:2016)
Peintures et vernis - Revêtements réduisant le Beschichtungsstoffe - Reibungsreduzierende
frottement pour l'intérieur de gazoducs en acier Beschichtungen für das Innere von Stahlrohrleitungen
enterrés et immergés pour le transport de gaz non im On- und Offshore-Bereich für nicht korrosive Gase
corrosifs (ISO 15741:2016) (ISO 15741:2016)
This European Standard was approved by CEN on 18 January 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15741:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15741:2021
EN ISO 15741:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15741:2021
EN ISO 15741:2021 (E)
European foreword
The text of ISO 15741:2016 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 15741:2021 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2021, and conflicting national standards shall
be withdrawn at the latest by August 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15741:2016 has been approved by CEN as EN ISO 15741:2021 without any modification.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.