EN ISO 801-3:1996

Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)

Specifies a method for determining the dryness of a lot of pulp baled in sheet form and shipped as unitized bales, and for calculating its saleable mass. Applicable to all kinds of this pulp. Does not apply to pulp baled in lots in slab form or to pulp shipped as single bales. An example of a full certificate of analysis and related calculations is given in annex A. Annex B gives details of equipment for marking the position of specimen sheets in sample bales.

Zellstoffe - Bestimmung des Handelsgewichtes von Lieferposten - Teil 3: Großballen (ISO 801-3:1994)

Dieser Teil von ISO 801 legt ein Verfahren zur Bestimmung der Trockenmasse von Zellstoffbogen in Ballen und Versand in Form von Großballen für die Berechnung des Handelsgewichtes fest. Das Verfahren ist für alle Arten von Zellstoffbogen in Ballen anwendbar, die in Form von Großballen versendet werden. Es ist nicht anwendbar für Zellstofflagen in Ballen oder für einzeln versandte Zellstoffbahnen. Bei Beispiel für ein vollständiges Zertifikat der Untersuchung und die entsprechenden Berechnungen sind im Anhang A zusammengestellt.

Pâtes - Détermination de la masse marchande des lots - Partie 3: Ballots (ISO 801-3:1994)

La présente partie de l'ISO 801 prescrit une méthode pour la détermination de la siccité d'un lot de pâte en balles constitué de feuilles et expédié sous forme de balles unitisées, et pour le calcul de sa masse marchande. La méthode est applicable à toutes les qualités de pâte en balles constituées en feuilles et expédiées sous forme de balles unitisées. Elle ne s'applique pas aux balles de pâte en plaques, ni aux pâtes expédiées en ballots individuels. Un exemple de rapport d'analyse complet et des calculs correspondants est donné dans l'annexe A. L'annexe B donne des détails concernant le matériel pour le repérage des feuilles échantillons dans les balles échantillons.

Vlaknine - Določanje prodajne mase v balah - 3. del: Poenotenje bal

General Information

• Status: Published
• Publication Date: 17-Sep-1996
• ICS: 85.040 - Pulps
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 02-May-2014
• Completion Date: 02-May-2014
• Ref Project: SIST EN ISO 801-3:1997 - Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 801-3:1997
01-september-1997
9ODNQLQH'RORþDQMHSURGDMQHPDVHYEDODKGHO3RHQRWHQMHEDO
Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)
Zellstoffe - Bestimmung des Handelsgewichtes von Lieferposten - Teil 3: Großballen
(ISO 801-3:1994)
Pâtes - Détermination de la masse marchande des lots - Partie 3: Ballots (ISO 801-
3:1994)
Ta slovenski standard je istoveten z: EN ISO 801-3:1996
ICS:
85.040 Vlaknine Pulps
SIST EN ISO 801-3:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 801-3:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 801-3:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 801-3:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 801-3:1997
INTERNATIONAL
Is0
STANDARD
801-3
First edition
1994-08-o 1
Corrected and reprinted
1996-06-I 5
Pulps - Determination of saleable mass in
lots -
Part 3:
Unitized bales
PS tes - D&termination de la masse marchande des lots -
Par-tie 3: Ballots
Reference number
IS0 801-3:1994(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 801-3:1997
IS0 801=3:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(I EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 801-3 was prepared by Technical Committee
lSO/TC 6, Paper, board and pulps, Subcommittee SC 5, Test methods
and quality specifications for pulp.
IS0 801 consists of the following parts, under the general title Pulps -
De termina Con of saleable mass in lots:
- Part 7: Pulp baled in sheet form
- Part 2: Pulps (such as flash-dried pulps) baled in slabs
- Part 3: Unitized bales
Annexes A and B of this part of IS0 801 are for information only.
0 IS0 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopyrng and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 801-3:1997
INTERNATIONAL STANDARD 0 ISO IS0 801=3:1994(E)
Pulps - Determination of saleable mass in lots -
Part 3:
Unitized bales
- its gross mass (2.4) and its absolute dryness
1 Scope
(2.6),
This part of IS0 801 specifies a method for deter-
or
mining the dryness of a lot of pulp baled in sheet form
and shipped as unitized bales, and for calculating its
- its saleable mass (2.9).
saleable mass.
2.2 unit: A set of bales strapped together. Usually
This method is applicable to all kinds of pulp baled in
a unit (unitized bale) consists of eight individual bales,
sheet form and shipped as unitized bales. It does not
each having its own wrappings and wires, strapped
apply to pulp baled in lots in slab form or to pulp
together with steel bands to facilitate shipping and
shipped as single bales.
handling.
An example of a full certificate of analysis and related
2.3 bale: An individually strapped package of pulp
calculations is given in annex A. Annex B gives de-
sheets.
tails of equipment for marking the position of speci-
men sheets in sample bales.
2.4 gross mass: The total mass of a bale, a unit, a
part of a lot or a lot comprising
- contents;
2 Definitions
- wrappers (pulp - paper);
For the purposes of this part of IS0 801, the following
- packaging wires or strappings of individual bales.
definitions apply.
2.5 oven-dry mass: The mass obtained on drying
2.1 lot: The total number of unitized bales of the
pulp at 105 “C + 2 “C, until constant mass is reached.
-
same sort of pulp of specific characteristics.
2.6 absolute dryness: The ratio of the oven-dry
The number of unitized bales comprising a lot is indi-
mass (2.5) of the pulp to its initial mass, expressed
cated by the invoice or by agreement between the
as a percentage.
interested parties.
A lo
...