EN ISO 17463:2014
(Main)Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014)
Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014)
ISO 17463:2014 gives guidelines on how to perform accelerated cyclic electrochemical technique (ACET) with organic protective coatings on metals.
ISO 17463:2014 specifies:
- the instrumental assembly;
- the execution of an ACET test and the considerations relative to the samples and electrochemical cell, test parameters and procedure.
ISO 17463:2014 also provides guidelines for the presentation of experimental results and other type of information obtained.
Beschichtungsstoffe - Richtlinie zur Bestimmung der antikorrosiven Eigenschaften organischer Beschichtungen durch beschleunigte zyklische elektrochemische Verfahren (ISO 17463:2014)
Diese Internationale Norm formuliert Richtlinien, wie beschleunigte zyklische elektrochemische Verfahren (ACET) mit organischen Korrosionsschutzbeschichtungen auf Metallen durchgeführt werden.
Diese Internationale Norm legt fest:
die Geräteanordnung;
die Ausführung einer ACET-Prüfung und die Überlegungen, die die Proben und die elektrochemische Zelle, Prüfparameter und die Durchführung betreffen.
Diese Internationale Norm formuliert Richtlinien für die Darstellung von Versuchsergebnissen und anderer Arten erhaltener Daten.
Einige typische Beispiele sind in einem informativen Anhang aufgeführt.
Peintures et vernis - Lignes directrices pour la détermination des propriétés anticorrosives de revêtements organiques par une technique électrochimique cyclique accélérée (ISO 17463:2014)
L'ISO 17463:2014 donne des lignes directrices sur la mise en oeuvre de la technique électrochimique cyclique accélérée (ACET) avec des revêtements organiques de protection anticorrosion sur métaux.
L'ISO 17463:2014 spécifie:
- le montage instrumental;
- le mode de réalisation d'un essai ACET et les dispositions relatives aux échantillons, à la cellule électrochimique, aux paramètres d'essai et au mode opératoire.
L'ISO 17463:2014 fournit également des lignes directrices concernant la présentation des résultats d'essai et de tout autre type d'informations obtenues.
Barve in laki - Ugotavljanje protikorozijskih lastnosti organskih premazov s pospešeno ciklično elektrokemijsko tehniko (ACET) (ISO 17463:2014)
Standard EN ISO 17463 podaja smernice glede izvajanja pospešene ciklične elektrokemijske tehnike (ACET) na organskih zaščitnih premazih na kovinah. Ta mednarodni standard določa: - sestav instrumentov; - izvedbo preskusa ACET in premisleke, ki se nanašajo na vzorce in elektrokemijsko celico, parametre preskusa in postopek. Ta mednarodni standard podaja tudi smernice za predstavitev rezultatov poskusa in drugih vrst pridobljenih informacij. Nekateri običajni primeri so prikazani v informativnem dodatku.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2014
%DUYHLQODNL8JRWDYOMDQMHSURWLNRUR]LMVNLKODVWQRVWLRUJDQVNLKSUHPD]RYV
SRVSHãHQRFLNOLþQRHOHNWURNHPLMVNRWHKQLNR $&(7 ,62
Paints and varnishes - Determination of the corrosion protection properties of organic
coatings by the accelerated cyclic electrochemical technique (ACET) (ISO 17463:2014)
Beschichtungsstoffe - Richtlinie zur Bestimmung der antikorrosiven Eigenschaften
organischer Beschichtungen durch beschleunigte zyklische elektrochemische Verfahren
(ISO 17463:2014)
Peintures et vernis - Détermination des propriétés anticorrosives de revêtements
organiques avec la technique électrochimique cyclique accélérée (ACET) (ISO
17463:2014)
Ta slovenski standard je istoveten z: EN ISO 17463:2014
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17463
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 87.040
English Version
Paints and varnishes - Guidelines for the determination of
anticorrosive properties of organic coatings by accelerated cyclic
electrochemical technique (ISO 17463:2014)
Peintures et vernis - Lignes directrices pour la Beschichtungsstoffe - Richtlinie zur Bestimmung der
détermination des propriétés anticorrosives de revêtements antikorrosiven Eigenschaften organischer Beschichtungen
organiques par une technique électrochimique cyclique durch beschleunigte zyklische elektrochemische Verfahren
accélérée (ISO 17463:2014) (ISO 17463:2014)
This European Standard was approved by CEN on 11 July 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17463:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 17463:2014) has been prepared by Technical Committee ISO/TC 35 ”Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2015, and conflicting national standards shall be withdrawn
at the latest by February 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17463:2014 has been approved by CEN as EN ISO 17463:2014 without any modification.
INTERNATIONAL ISO
STANDARD 17463
First edition
2014-08-01
Paints and varnishes — Guidelines
for the determination of anticorrosive
properties of organic coatings by
accelerated cyclic electrochemical
technique
Peintures et vernis — Lignes directrices pour la détermination
des propriétés anticorrosives de revêtements organiques par une
technique électrochimique cyclique accélérée
Reference number
ISO 17463:2014(E)
©
ISO 2014
ISO 17463:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 17463:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
4.1 General . 2
4.2 EIS measurement . 3
4.3 Cathodic polarization . 3
4.4 Potential relaxation . 3
5 Apparatus . 3
6 Specimens . 3
6.1 Samples preparation . 3
6.2 Environmental control . 3
6.3 Number of specimens and repeatability of results . 4
7 Procedure. 4
7.1 EIS measurement . 4
7.2 Cathodic polarization . 4
7.3 Relaxation process . 4
7.4 Number of cycles . 4
8 Data presentation . 5
8.1 Graphics for EIS . 5
8.2 Graphics for the potential relaxation . 5
9 Precision . 5
10 Test report . 5
Annex A (informative) Typical example of results from coatings . 7
Bibliography
.............................................................................................................................................................................................................................14
ISO 17463:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and vanishes.
iv © ISO 2014 – All rights reserved
ISO 17463:2014(E)
Introduction
This International Standard describes the determination of the anticorrosive properties of organic
coatings by means of the accelerated cyclic electrochemical technique (ACET). The method is based on
the so called AC/DC/AC procedure. This technique allows comparing the protective and anticorrosive
properties of different coating systems on metal in short times and in a qualitative and quantitative
way. ACET consists of the application of cycles of EIS (electrochemical impedance spectroscopy)
measurements, cathodic polarizations and potential relaxation. Degradation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.