Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; design and safety requirements

This European Standard specifies requirements for the design, construction and operation of kitchen ventilation ceilings, including technical safety, ergonomic and hygienic features.
This European Standard is applicable to ventilation systems in commercial kitchens, associated areas and other installations processing foodstuffs intended for commercial use. Kitchens and associated areas are special rooms in which meals are prepared, where tableware and equipment is washed, cleaned and food is stored.
This European Standard is applicable to kitchen ventilation ceilings except those used in domestic kitchens.
A method of verification of each requirement is also specified.
Unless otherwise specified, the requirements of this standard need to be checked by way of inspection and/or measurement.
NOTE   Please note the possible existence of additional or alternative local national regulations on installation, appliance requirements and inspection, maintenance and operation.

Einrichtungen in gewerblichen Küchen - Elemente zur Be- und Entlüftung - Teil 3: Küchenlüftungsdecken; Gestaltungs- und Sicherheitsanforderungen

Équipement pour cuisines professionnelles - Eléments de ventilation pour cuisines professionnelles - Partie 3 : Plafonds de ventilation de cuisine - Conception et exigences de sécurité

Oprema za profesionalne kuhinje - Sestavni deli za prezračevanje kuhinj - 3. del: Prezračevanje kuhinjskih stropov - Projektiranje in varnostne zahteve - Dopolnilo A1

General Information

Status
Not Published
Publication Date
25-Apr-2022
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
11-Jun-2020
Due Date
15-Sep-2020
Completion Date
11-Jun-2020

Relations

Buy Standard

Draft
EN 16282-3:2017/oprA1:2020
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2020
Oprema za profesionalne kuhinje - Sestavni deli za prezračevanje kuhinj - 3. del:
Prezračevanje kuhinjskih stropov - Projektiranje in varnostne zahteve - Dopolnilo
A1
Equipment for commercial kitchens - Components for ventilation in commercial kitchens -
Part 3: Kitchen ventilation ceilings; design and safety requirements
Einrichtungen in gewerblichen Küchen - Elemente zur Be- und Entlüftung - Teil 3:
Küchenlüftungsdecken; Gestaltungs- und Sicherheitsanforderungen
Équipement pour cuisines professionnelles - Eléments de ventilation pour cuisines
professionnelles - Partie 3 : Plafonds de ventilation de cuisine - Conception et exigences
de sécurité
Ta slovenski standard je istoveten z: EN 16282-3:2016/prA1
ICS:
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
97.040.99 Druga kuhinjska oprema Other kitchen equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 16282-3:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2020
ICS 97.040.99
English Version
Equipment for commercial kitchens - Components for
ventilation in commercial kitchens - Part 3: Kitchen
ventilation ceilings; design and safety requirements
Équipement pour cuisines professionnelles - Eléments Einrichtungen in gewerblichen Küchen - Elemente zur
de ventilation pour cuisines professionnelles - Partie 3 Be- und Entlüftung - Teil 3: Küchenlüftungsdecken;
: Plafonds de ventilation de cuisine - Conception et Gestaltungs- und Sicherheitsanforderungen
exigences de sécurité
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 156.

This draft amendment A1, if approved, will modify the European Standard EN 16282-3:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16282-3:2016/prA1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modification to 2, Normative references . 4
2 Modification to Table 2, Materials . 4
3 Modification to 6.10, Earth bonding .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.