EN ISO 16000-9:2006
(Main)Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006)
Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006)
ISO 16000-9:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room.
ISO 16000-9:2006 applies to various emission test chambers used for determination of the emission of volatile organic compounds from building products or products. A general description of an emission test chamber is given.
ISO 16000-9:2006 is also applicable to wood-based panels and other building products, in order to determine the emission rate of formaldehyde.
Innenraumluftverunreinigungen - Teil 9: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen - Emissionsprüfkammer-Verfahren (ISO 16000-9:2006)
Dieser Teil der ISO 16000 legt ein allgemeingültiges Laboratoriumsprüfverfahren zur Bestimmung der flächenspezifischen Emissionsrate von flüchtigen organischen Verbindungen (VOC) aus neu hergestellten Bauprodukten oder Einrichtungsgegenständen unter definierten klimatischen Bedingungen fest. Grundsätzlich kann das Verfahren auch bei älteren Produkten angewendet werden. Die ermittelten Emissionsdaten können zur Konzentrationsberechnung in einem Modellraum genutzt werden.
Dieser Teil der ISO 16000 ist für verschiedene Emissionsprüfkammern anwendbar, die zur Bestimmung der Emissionen von flüchtigen organischen Verbindungen aus Bauprodukten oder Einrichtungsgegenständen eingesetzt werden.
Probenahme, Transport und Lagerung der zu prüfenden Materialien sowie die Vorbereitung der Prüfstücke werden in ISO 16000-11 beschrieben. Die Luftprobenahme und die analytischen Verfahren zur Bestimmung der VOC werden in ISO 16000-6 und ISO 16017-1 [11] beschrieben.
Eine allgemeine Beschreibung einer Emissionsprüfkammer wird im Anhang C dieses Teils der ISO 16000 gegeben.
Für die Bestimmung von Formaldehydemissionen aus Holzwerkstoffen wird auf die EN 717-1:2004[12] verwiesen. Insbesondere sei darauf hingewiesen, dass auch ISO 16000-9 für die Bestimmung der Emissionsrate von Formaldehyd aus Holzwerkstoffen und anderen Bauprodukten anwendbar ist. Das Formaldehydmessverfahren wird in ISO 16000-3 [1] beschrieben.
Air intérieur - Partie 9: Dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Méthode de la chambre d'essai d'émission (ISO 16000-9:2006)
L'ISO 16000-9:2006 spécifie une méthode générale d'essai en laboratoire pour la détermination du débit d'émission spécifique par unité de surface des composés organiques volatils (COV) provenant de produits de construction nouvellement fabriqués ou d'objets d'équipement, dans des conditions climatiques définies. En principe, la méthode peut être également appliquée aux produits qui ont vieilli. Les données obtenues sur les émissions peuvent être utilisées pour calculer les concentrations dans une pièce modèle.
L'ISO 16000-9:2006 s'applique à différentes chambres d'essai d'émission utilisées pour la détermination des émissions de composés organiques volatils provenant des produits de construction ou d'objets d'équipement. Une description générale d'une chambre d'essai d'émission est fournie
L'ISO 16000-9:2006 s'applique également aux panneaux à base de bois et aux autres produits de construction afin de déterminer le débit d'émission du formaldéhyde.
Notranji zrak – 9. del: Določevanje emisije hlapnih organskih spojin iz gradbenih proizvodov in opreme – Metoda s preskusno komoro (ISO 16000-9:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2006
1DGRPHãþD
SIST ENV 13419-1:2000
1RWUDQML]UDN± GHO 'RORþHYDQMHHPLVLMHKODSQLKRUJDQVNLKVSRMLQL]JUDGEHQLK
SURL]YRGRYLQRSUHPH±0HWRGDVSUHVNXVQRNRPRUR ,62
Indoor air - Part 9: Determination of the emission of volatile organic compounds from
building products and furnishing - Emission test chamber method (ISO 16000-9:2006)
Innenraumluftverunreinigungen - Teil 9: Bestimmung der Emission von flüchtigen
organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen -
Emissionsprüfkammer-Verfahren (ISO 16000-9:2006)
Air intérieur - Partie 9: Dosage de l'émission de composés organiques volatils de
produits de construction et d'objets d'équipement - Méthode de la chambre d'essai
d'émission (ISO 16000-9:2006)
Ta slovenski standard je istoveten z: EN ISO 16000-9:2006
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 16000-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 13.040.20 Supersedes ENV 13419-1:1999
English Version
Indoor air - Part 9: Determination of the emission of volatile
organic compounds from building products and furnishing -
Emission test chamber method (ISO 16000-9:2006)
Air intérieur - Partie 9: Dosage de l'émission de composés Innenraumluftverunreinigungen - Teil 9: Bestimmung der
organiques volatils de produits de construction et d'objets Emission von flüchtigen organischen Verbindungen aus
d'équipement - Méthode de la chambre d'essai d'émission Bauprodukten und Einrichtungsgegenständen -
(ISO 16000-9:2006) Emissionsprüfkammer-Verfahren (ISO 16000-9:2006)
This European Standard was approved by CEN on 16 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16000-9:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 16000-9:2006) has been prepared by Technical Committee CEN/TC
264 "Air quality", the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 146 "Air quality".
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2006, and conflicting national
standards shall be withdrawn at the latest by August 2006.
This document supersedes ENV 13419-1:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
INTERNATIONAL ISO
STANDARD 16000-9
First edition
2006-02-01
Indoor air —
Part 9:
Determination of the emission of volatile
organic compounds from building
products and furnishing — Emission test
chamber method
Air intérieur —
Partie 9: Dosage de l'émission de composés organiques volatils de
produits de construction et d'objets d'équipement — Méthode de la
chambre d'essai d'émission
Reference number
ISO 16000-9:2006(E)
©
ISO 2006
ISO 16000-9:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 16000-9:2006(E)
Contents Page
Foreword. iv
Introduction . vi
1 Scope .1
2 Normative references .1
3 Terms and definitions .2
4 Symbols and abbreviated terms .4
5 Principle.4
6 Emission test chamber system.4
7 Apparatus .6
8 Test conditions .6
9 Verification of the test conditions.7
10 Test specimens.8
11 Emission test chamber preparation.8
12 Test method.8
13 Calculation of area specific emission rates and expression of results.9
14 Performance characteristics .10
15 Test report .10
Annex A (normative) System for quality assurance / quality control.11
Annex B (informative) Examples of area specific air flow rates in a model room.13
Annex C (informative) General description of an emission test chamber .14
Bibliography .15
ISO 16000-9:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16000-9 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 264, Air quality, in collaboration with Technical Committee ISO/TC 146, Air quality, Subcommittee
SC 6, Indoor air, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
ISO 16000 consists of the following parts, under the general title Indoor air:
— Part 1: General aspects of sampling strategy
— Part 2: Sampling strategy for formaldehyde
— Part 3: Determination of formaldehyde and other carbonyl compounds — Active sampling method
— Part 4: Determination of formaldehyde — Diffusive sampling method
— Part 5: Measurement strategy for volatile organic compounds (VOCs)
— Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on
Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID
— Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
— Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions
— Part 9: Determination of the emission of volatile organic compounds from building products and
furnishing — Emission test chamber method
— Part 10: Determination of the emission of volatile organic compounds from building products and
furnishing — Emission test cell method
— Part 11: Determination of the emission of volatile organic compounds from building products and
furnishing — Sampling, storage of samples and preparation of test specimens
The following parts are under preparation:
— Part 12: Sampling strategy for polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-
dioxins (PCDDs), polychlorinated dibenzo-furans )PCDFs) and polychlorinated biphenyls (PCBs)
iv © ISO 2006 – All rights reserved
ISO 16000-9:2006(E)
— Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls and
polychlorinated dibenzo-p-dioxins/dibenzofurans — Collection on sorbent-backed filters with high-
resolution gas chromatographic/mass spectrometric analysis
— Part 14: Sampling strategy for nitrogen dioxide (NO )
— Part 15: Measurement of nitrogen dioxide (NO )
— Part 16: Detection and enumeration of moulds — Sampling of moulds by filtration
— Part 17: Detection and enumeration of moulds — Culture-based method
ISO 16000-9:2006(E)
Introduction
The determination of volatile organic compounds (VOCs) emitted from building products using emission test
chambers in conjunction with the standardised sampling, storage of samples and preparation of test
specimens has objectives such as:
⎯ to provide manufacturers, builders, and end users with emission data useful for the evaluation of the
impact of building products on the indoor air quality;
⎯ to promote the development of improved products.
The method can in principle be used for most building products used indoors.
vi © ISO 2006 – All rights reserved
INTERNATIONAL STANDARD ISO 16000-9:2006(E)
Indoor air —
Part 9:
Determination of the emission of volatile organic compounds
from building products and furnishing — Emission test
chamber method
1 Scope
This part of ISO 16000 specifies a general laboratory test method for determination of the area specific
emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing
under defined climate conditions. The method can also, in principle, be applied to aged products. The
emission data obtained can be used to calcula
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.