Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)

ISO 13590:2003 applies to personal watercraft, for the construction and installation of builder's plate, permanently installed petrol fuel systems, electrical systems, steering systems, ventilation, hull structure and floatation, and requirements for stability, freeboard and owner's manual.

Kleine Wasserfahrzeuge - Wasserskooter - Anforderungen an Konstruktion und Einbau von Systemen (ISO 13590:2003)

Diese Internationale Norm gilt für Wasserskooter entsprechend der Definition in 3.1 für die Ausführung und
Installation von Hersteller-Schild, fest eingebauten Ottokraftstoffsystemen, elektrischen Anlagen,
Lenkvorrichtungen, Lüftung, Rumpfkonstruktion und Auftriebskörper und sie enthält Anforderungen an die
Stabilität, den Freibord und das Eignerhandbuch.

Petits navires - Motos aquatiques - Exigences de construction et d'installation des systèmes (ISO 13590:2003)

L'ISO 13590:2003 s'applique aux motos aquatiques et concerne la construction et l'installation de la plaque constructeur, des systèmes carburants installés à demeure, des systèmes électriques, du système de direction et de la ventilation; la structure de la coque; la flottabilité et les exigences relatives à la stabilité, au franc-bord et au manuel du propriétaire.

Mala plovila - Osebna plovila - Zahteve za konstrukcijo in inštalacijo sistema (ISO 13590:2003)

Ta mednarodni standard se uporablja za osebna plovila, opredeljena v točki 3.1, za konstrukcijo in inštalacijo gradbene plošče, trajno vgrajene sisteme za gorivo, električne sisteme, krmilne sisteme, prezračevanje, strukturo trupa in plovbene lastnosti, ter podaja zahteve za stabilnost, nadvodje in navodila za uporabo.

General Information

Status
Withdrawn
Publication Date
25-Sep-2018
Withdrawal Date
14-Mar-2023
Technical Committee
Drafting Committee
Current Stage

Relations

Buy Standard

Standard
EN ISO 13590:2018
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13590:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 13590:2004
SIST EN ISO 13590:2004/AC:2004
Mala plovila - Osebna plovila - Zahteve za konstrukcijo in inštalacijo sistema (ISO
13590:2003)
Small craft - Personal watercraft - Construction and system installation requirements
(ISO 13590:2003)
Kleine Wasserfahrzeuge - Wasserskooter - Anforderungen an Konstruktion und Einbau
von Systemen (ISO 13590:2003)
Petits navires - Motos aquatiques - Exigences de construction et d'installation des
systèmes (ISO 13590:2003)
Ta slovenski standard je istoveten z: EN ISO 13590:2018
ICS:
47.080 ýROQL Small craft
SIST EN ISO 13590:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13590:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 13590:2018


EN ISO 13590
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 13590:2003
English Version

Small craft - Personal watercraft - Construction and system
installation requirements (ISO 13590:2003)
Petits navires - Motos aquatiques - Exigences de Kleine Wasserfahrzeuge - Wasserskooter -
construction et d'installation des systèmes (ISO Anforderungen an Konstruktion und Einbau von
13590:2003) Systemen (ISO 13590:2003)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13590:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13590:2018
EN ISO 13590:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13590:2018
EN ISO 13590:2018 (E)
European foreword
The text of ISO 13590:2003 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 13590:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be
withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13590:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.