EN ISO 13590:2003

Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)

ISO 13590:2003 applies to personal watercraft, for the construction and installation of builder's plate, permanently installed petrol fuel systems, electrical systems, steering systems, ventilation, hull structure and floatation, and requirements for stability, freeboard and owner's manual.

Kleine Wasserfahrzeuge - Wasserskooter - Anforderungen an Konstruktion und Einbau von Systemen (ISO 13590:2003)

Diese Internationale Norm gilt für Wasserskooter entsprechend der Definition in 3.1 für die Ausführung und Instal-
lation von Hersteller-Schild, fest eingebauten Ottokraftstoffsystemen, elektrischen Anlagen, Lenkvorrichtungen,
Lüftung, Rumpfkonstruktion und Auftriebskörper und sie enthält Anforderungen an die Stabilität, den Freibord und
das Handbuch für Schiffsführer.

Petits navires - Motos aquatiques - Exigences de construction et d'installation des systèmes (ISO 13590:2003)

L'ISO 13590:2003 s'applique aux motos aquatiques et concerne la construction et l'installation de la plaque constructeur, des systèmes carburants installés à demeure, des systèmes électriques, du système de direction et de la ventilation; la structure de la coque; la flottabilité et les exigences relatives à la stabilité, au franc-bord et au manuel du propriétaire.

Mala plovila - Osebna plovila - Zahteve za konstrukcijo in instalacijo sistema (ISO 13590:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2003
• Withdrawal Date: 25-Sep-2018
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Sep-2018
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Ref Project: SIST EN ISO 13590:2004 - Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)

Relations

• Replaced By: EN ISO 13590:2018 - Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)
• Effective Date: 08-Jun-2022
• Corrected By: EN ISO 13590:2003/AC:2004 - Small craft - Personal watercraft - Construction and system installation requirements (ISO 13590:2003)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13590:2004
01-september-2004
Mala plovila - Osebna plovila - Zahteve za konstrukcijo in instalacijo sistema (ISO
13590:2003)
Small craft - Personal watercraft - Construction and system installation requirements
(ISO 13590:2003)
Kleine Wasserfahrzeuge - Wasserskooter - Anforderungen an Konstruktion und Einbau
von Systemen (ISO 13590:2003)
Petits navires - Motos aquatiques - Exigences de construction et d'installation des
systemes (ISO 13590:2003)
Ta slovenski standard je istoveten z: EN ISO 13590:2003
ICS:
47.080
SIST EN ISO 13590:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 13590
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 47.080
English version
Small craft - Personal watercraft - Construction and system
installation requirements (ISO 13590:2003)
Petits navires - Motos aquatiques - Exigences de Kleine Wasserfahrzeuge - Wasserskooter - Anforderungen
construction et d'installation des systèmes (ISO an Konstruktion und Einbau von Systemen (ISO
13590:2003) 13590:2003)
This European Standard was approved by CEN on 8 December 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13590:2003 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 13590:2003 (E)
CORRECTED  2004-03-03
Foreword
This document (EN ISO 13590:2003) has been prepared by Technical Committee ISO/TC 188
"Small craft", the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2004, and conflicting national
standards shall be withdrawn at the latest by June 2004.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 13590:2003 has been approved by CEN as EN ISO 13590:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 3 ----------------------

EN ISO 13590:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 1402 1994 Rubber and plastics hoses and EN ISO 1402 1996
hose assemblies - Hydrostatic
testing
ISO 7326 1991 Rubber and plastics hoses - EN 27326 1993
Assessment of ozone resistance
under static conditions
ISO 8469 1994 Small craft - Non-fire-resistant fuel EN ISO 8469 1995
hoses
ISO 10133
...