iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14253-2:2011/AC:2013

(Corrigendum)

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)

This Technical Specification gives guidance on the implementation of the concept of "Guide to the estimation of uncertainty in measurement" (in short GUM) to be applied in industry for the calibration of (measurement) standards and measuring equipment in the field of GPS and the measurement of workpiece GPS-characteristics.
The aim is to promote full information on how to achieve uncertainty statements and provide the basis for international comparison of results of measurements and their uncertainties (relationship between purchaser and supplier).
This Technical Specification is intended to support ISO 14253-1. This Technical Specification and ISO 14253-1 are beneficial to all technical functions in a company in the interpretation of GPS specifications (i.e. tolerances of workpiece characteristics and values of maximum permissible errors (MPE) for metrological characteristics of measuring equipment.

Geometrische Produktspezifikationen (GPS) - Prüfung von Werkstücken und Messgeräten durch Messen - Teil 2: Anleitung zur Schätzung der Unsicherheit bei GPS-Messungen, bei der Kalibrierung von Messgeräten und bei der Produktprüfung (ISO 14253-2:2011/Cor 1:2013)

Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2: Lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de mesure et dans la vérification des produits - Rectificatif technique 1 (ISO 14253-2:2011/Cor 1:2013)

Specifikacija geometrijskih veličin izdelka - Preskusi z merjenjem obdelovancev in merilne opreme - 2. del: Navodila za ugotavljanje negotovosti pri meritvi geometrijske veličine izdelka, pri umerjanju merilne opreme in pri preverjanju izdelka (ISO 14253-2:2011/Cor 1:2013)

Ta tehnična specifikacija podaja navodila za izvajanje koncepta »Vodilo za ugotavljanje negotovosti pri merjenju« (skrajšano GUM) v industriji pri umerjanju (merilnih) standardov in merilne opreme pri specifikaciji geometrijskih veličin izdelka in merjenju karakteristik geometrijske veličine obdelovanca.
Cilj je spodbujati popolne informacije o tem, kako doseči izjave o negotovosti, in podati osnovo za mednarodno primerjavo rezultatov meritev in njihovih negotovostih (odnos med kupcem in dobaviteljem).
Ta tehnična specifikacija podpira ISO 14253-1. Ta tehnična specifikacija in ISO 14253-1 sta koristna za vse tehnične funkcije v podjetju pri razlagi specifikacij geometrijskih veličin izdelka (tj. tolerance značilnosti obdelovancev in vrednosti maksimalnih dovoljenih napak (MPE) za meroslovne karakteristike merilne opreme).

General Information

Status
Published
Publication Date
23-Jul-2013
ICS
17.040.01 - Linear and angular measurements in general
17.040.40 - Geometrical Product Specification (GPS)
Technical Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Drafting Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Jul-2013
Completion Date
24-Jul-2013
Ref Project
SIST EN ISO 14253-2:2011/AC:2014 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)

Relations

Corrects
EN ISO 14253-2:2011 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
Effective Date
01-May-2013

Buy Standard

EN ISO 14253-2:2011/AC:2014EN ISO 14253-2:2011/AC:2014
PreviousNext
Corrigendum
EN ISO 14253-2:2011/AC:2014
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikationen (GPS) - Prüfung von Werkstücken und Messgeräten durch Messen - Teil 2: Anleitung zur Schätzung der Unsicherheit bei GPS-Messungen, bei der Kalibrierung von Messgeräten und bei der Produktprüfung (ISO 14253-2:2011/Cor 1:2013)Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2: Lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de mesure et dans la vérification des produits - Rectificatif technique 1 (ISO 14253-2:2011/Cor 1:2013)Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)17.040.40Geometrical Product Specification (GPS)17.040.30MerilaMeasuring instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 14253-2:2011/AC:2013SIST EN ISO 14253-2:2011/AC:2014en01-junij-2014SIST EN ISO 14253-2:2011/AC:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 14253-2:2011/AC
July 2013
Juillet 2013
Juli 2013 ICS 17.040.01 English version Version Française Deutsche Fassung
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2: Lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de mesure et dans la vérification des produits -Rectificatif technique 1 (ISO 14253-2:2011/Cor 1:2013)
Geometrische Produktspezifikationen (GPS) - Prüfung von Werkstücken und Messgeräten durch Messen - Teil 2: Anleitung zur Schätzung der Unsicherheit bei GPS-Messungen, bei der Kalibrierung von Messgeräten und bei der Produktprüfung (ISO 14253-2:2011/Cor 1:2013) This corrigendum becomes effective on 24 July 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 24 juillet 2013 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 24. Jul
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 20170:2019(Main)
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
SIST EN ISO 20170:2019

This document describes principles and tools to control a manufacturing process in accordance with a GPS specification. For this purpose a set of one or more complementary, independent characteristics (size, form, orientation, and location characteristics independent to each other) that correlate to the manufacturing process parameters and to the manufacturing process coordinate system established from the manufacturing datum system are used.
This document describes the concept of decomposition of the macro-geometrical part of the GPS specification. It does not cover the micro-geometry, i.e. surface texture.
The objective of the decomposition presented in this document is to define correction values for manufacturing control or to perform a statistical analysis of the process.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-4:2018(Main)
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
SIST EN ISO 17450-4:2018

ISO 17450-4:2017 specifies general rules for quantifying GPS deviations for individual GPS characteristics.
NOTE       GPS deviations can be local or global. A GPS characteristic defined from local GPS deviations is a parameter that transforms the set of local deviations into a global characteristic using a quantifying function (for more details, see Table 1).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14253-1:2017(Main)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
SIST EN ISO 14253-1:2018

ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account.
ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including:
-      workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both);
-      measuring equipment specifications (usually given as maximum permissible errors).
ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18391:2016(Main)
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
SIST EN ISO 18391:2017

ISO 18391:2016 defines rules to establish and to indicate population specifications, which are used to specify conditions on population characteristics, which are established from a set of characteristic values obtained one on each workpiece of a population of workpieces.
A population specification (as applied to a population of workpieces considered as a collection and not as individual items) can be seen as a complementary requirement to the individual specification (as applied to each workpiece considered as individual items). Population specifications express the statistical hypotheses used on the population of workpieces.
NOTE 1       A population specification is a complement to an individual GPS specification.
NOTE 2       ISO 18391:2016 is not intended to mandate a given tolerancing method or how to calculate tolerance values. Its intent is to specify tools to allow the expression of population specifications.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-3:2016(Main)
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
SIST EN ISO 17450-3:2016

ISO 17450-3:2016 gives default definitions for the extracted features (integral or derived) of workpieces, which are toleranced features in GPS specifications (dimensional, geometrical, or surface texture specifications). This part of ISO 17450 defines default geometrical features used to define GPS characteristics.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14253-5:2015(Main)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
SIST EN ISO 14253-5:2015

ISO 14253-5:2015 specifies concepts and terms for evaluating the uncertainties of the test values derived according to a test protocol agreed upon by the parties and relative to instrument indication(s), obtained in verification testing of GPS indicating measuring instruments.
NOTE          The uncertainty of the test values, referred to as test value uncertainty, is not to be confused with the measurement uncertainty associated with using that indicating measuring instrument to measure workpieces. The former only is covered in this part of ISO 14253; for guidance on the latter see the ISO/IEC Guide 98‑3 (GUM) and ISO 14253‑2.
When a test of an indicating measuring instrument comprises several test values, some relative to the instrument indication and some to other metrological characteristics, this part of ISO 14253 is concerned with the uncertainty of the former only.
This part of ISO 14253 does not provide guidelines to ensure the adequacy of a test protocol; rather, once a test protocol is given, it describes how to evaluate the consequent test value uncertainty.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14638:2015(Main)
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
SIST EN ISO 14638:2015

ISO 14638:2014 is a fundamental ISO GPS standard. It explains the concept of Geometrical Product Specification (ISO GPS), and provides a framework to illustrate how current and future ISO GPS standards address the requirements of the ISO GPS system.
The framework is intended to be of use to users of ISO GPS standards, by illustrating the extent of the scope of the different standards, and showing how they relate to each other.
The framework is also used for structuring the development of standards for GPS by technical committee ISO/TC 213.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-2:2012(Main)
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
SIST EN ISO 17450-2:2013

1 Scope
This part of ISO 17450 defines terms related to specifications, operators (and operations) and uncertainties used in geometrical product specifications (GPS) standards. It presents the basic tenets of the GPS philosophy while discussing the impact of uncertainty on those tenets, and examines the processes of specification and verification as they apply to GPS.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-1:2011(Main)
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
SIST EN ISO 17450-1:2012

ISO 17450-1:2011 provides a model for geometrical specification and verification and defines the corresponding concepts. It also explains the mathematical basis of the concepts associated with the model and defines general terms for geometrical features of workpieces.
ISO 17450-1:2011 defines the fundamental concepts for the GPS system in order to provide nonambiguous GPS language to be used in design, manufacturing and verification, to identify features, characteristics and rules to provide the basis for specifications, to provide a complete symbology language to indicate GPS specifications, to provide simplified symbology by defining default rules, and to provide consistent rules for verification.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22432:2011(Main)
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
SIST EN ISO 22432:2012

ISO 22432:2011 defines general terms and types of features for geometrical features of specifications for workpieces. These definitions are based on concepts developed in ISO/TS 17450-1.
ISO 22432:2011 is not intended for industrial use as such among designers, but is aimed to serve as the "road map" mapping out the interrelationship between geometrical features, thus enabling future standardization for industry and software makers in a consistent manner.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day