prEN 4529-003

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard

This document specifies the required characteristics of sealing plugs, class T, for use in elements of electrical and optical connection containing cable (wire) sealing grommets, according to EN 4529-002. It is intended to be used together with EN 4529-001.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Verschluß-Stopfen - Teil 003: Klasse T - Produktnorm

Série aérospatiale - Organes de connexion électrique et optique - Obturateurs d’étanchéité - Partie 003 : Classe T - Norme de produit

Le présent document spécifie les caractéristiques requises des obturateurs d'étanchéité, de classe T, utilisés dans les organes de connexion électrique et optique contenant des passe-fils étanches, selon l’EN 4529-002. Il doit être utilisé conjointement avec l’EN 4529-001.

Aeronavtika - Elementi električnih in optičnih povezav - Tesnilni čepi - 003. del: Razred T - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 16-Jul-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 19-May-2023
• Completion Date: 19-May-2023
• Ref Project: oSIST prEN 4529-003:2021 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard

Relations

• Revises: EN 4529-003:2006 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4529-003:2021
01-september-2021

Aeronavtika - Elementi električnih in optičnih povezav - Tesnilni čepi - 003. del:

Razred T - Standard za proizvod

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part

003: Class T - Product standard
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Verschluß-
Stopfen - Teil 003: Klasse T - Produktnorm
Série aérospatiale - Organes de connexion electrique et optique - Obturateur
d’étanchéité - Partie 003 : Classe T - Norme de produit
Ta slovenski standard je istoveten z: prEN 4529-003
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4529-003:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4529-003:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4529-003:2021
DRAFT
EUROPEAN STANDARD
prEN 4529-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 49.060 Will supersede EN 4529-003:2006
English Version
Aerospace series - Elements of electrical and optical
connection - Sealing plugs - Part 003: Class T - Product
standard

Série aérospatiale - Organes de connexion electrique et Luft- und Raumfahrt - Elektrische und optische

optique - Obturateur d'étanchéité - Partie 003 : Classe Verbindungselemente - Verschluß-Stopfen - Teil 003:

T - Norme de produit Klasse T - Produktnorm

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4529-003:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4529-003:2021
prEN 4529-003:2021 (E)
Contents Page

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 Required characteristics .................................................................................................................... 5

4.1 Specific characteristics ....................................................................................................................... 5

4.2 Dimensions – Mass, colours .............................................................................................................. 5

4.3 Material .................................................................................................................................................... 5

4.4 Dimensions and mass .......................................................................................................................... 6

4.5 Tests ........................................................................................................................................................... 7

5 Designation ............................................................................................................................................. 8

6 Marking .................................................................................................................................................... 8

7 Technical specification ....................................................................................................................... 8

Annex A (informative) Standard evolution form ...................................................................................... 9

Bibliography ....................................................................................................................................................... 10

---------------------- Page: 4 ----------------------
oSIST prEN 4529-003:2021
prEN 4529-003:2021 (E)
European foreword
This document (prEN 4529-003:2021) has been prepared by the Aerospace and
...