EN ISO 14123-2:2015
(Main)Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)
ISO 14123-2:2015 establishes a methodology that leads to the selection of critical factors relating to emissions of hazardous substances for the purpose of specifying suitable verification procedures.
ISO 14123-2:2015 is intended to be used in conjunction with ISO 14123‑1 and relates specifically to ISO 14123‑1:2015, Clause 8.
Sicherheit von Maschinen - Minderung von Gesundheitsrisiken, die auf Gefahrstoffemissionen von Maschinen zurückzuführen sind - Teil 2: Methodik beim Aufstellen von Überprüfungsverfahren (ISO 14123-2:2015)
Dieser Teil von ISO 14123 stellt eine Methodik auf, die zwecks Festlegung geeigneter Überprüfungsverfahren zur Auswahl von kritischen Faktoren in Zusammenhang mit Gefahrstoffemissionen führt.
Dieser Teil von ISO 14123 ist dafür vorgesehen, in Verbindung mit ISO 14123-1 angewendet zu werden und bezieht sich insbesondere auf ISO 14123-1:2015, Abschnitt 8.
Sécurité des machines - Réduction des risques pour la santé résultant de substances dangereuses émises par des machines - Partie 2: Méthodologie menant à des procédures de vérification (ISO 14123-2:2015)
ISO 14123-2:2015 établit une méthodologie qui mène à la sélection des facteurs critiques liés aux émissions de substances dangereuses dans le but de spécifier des procédures de vérification appropriées.
ISO 14123-2:2015 est à utiliser conjointement avec l'ISO 14123‑1 et traite spécifiquement de l'ISO 14123‑1:2015, Article 8.
Varnost strojev - Zmanjšanje zdravstvenega tveganja zaradi nevarnih snovi, ki jih oddajajo stroji - 2. del: Metodologija preverjanja postopkov (ISO 14123-2:2015)
Ta evropski standard opredeljuje postopek za izbiro pomembnih dejavnikov, ki zadevajo emisije nevarnih snovi za namen določevanja primernega preverjanja postopkov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
1DGRPHãþD
SIST EN 626-2:1998+A1:2008
Varnost strojev - Zmanjšanje zdravstvenega tveganja zaradi nevarnih snovi, ki jih
oddajajo stroji - 2. del: Metodologija preverjanja postopkov (ISO 14123-2:2015)
Safety of machinery - Reduction of risks to health resulting from hazardous substances
emitted by machinery - Part 2: Methodology leading to verification procedures (ISO
14123-2:2015)
Sicherheit von Maschinen - Minderung von Gesundheitsrisiken, die auf
Gefahrstoffemissionen von Maschinen zurückzuführen sind - Teil 2: Methodik beim
Aufstellen von Überprüfungsverfahren (ISO 14123-2:2015)
Sécurité des machines - Réduction des risques pour la santé résultant de substances
dangereuses émises par des machines - Partie 2: Méthodologie menant à des
procédures de vérification (ISO 14123-2:2015)
Ta slovenski standard je istoveten z: EN ISO 14123-2:2015
ICS:
13.110 Varnost strojev Safety of machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 14123-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 13.110 Supersedes EN 626-2:1996+A1:2008
English Version
Safety of machinery - Reduction of risks to health resulting
from hazardous substances emitted by machinery - Part 2:
Methodology leading to verification procedures (ISO
14123-2:2015)
Sécurité des machines - Réduction des risques pour la Sicherheit von Maschinen - Minderung von
santé résultant de substances dangereuses émises par Gesundheitsrisiken, die auf Gefahrstoffemissionen von
des machines - Partie 2: Méthodologie menant à des Maschinen zurückzuführen sind - Teil 2: Methodik
procédures de vérification (ISO 14123-2:2015) beim Aufstellen von Überprüfungsverfahren (ISO
14123-2:2015)
This European Standard was approved by CEN on 10 October 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14123-2:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC. 4
European foreword
This document (EN ISO 14123-2:2015) has been prepared by Technical Committee ISO/TC 199 "Safety
of machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 626-2:1996+A1:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14123-2:2015 has been approved by CEN as EN ISO 14123-2:2015 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to Essential
Requirements of the New Approach Directive Machinery 2006/42/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of
conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 14123-2
Second edition
2015-11-15
Safety of machinery — Reduction
of risks to health resulting from
hazardous substances emitted by
machinery —
Part 2:
Methodology leading to verification
procedures
Sécurité des machines — Réduction des risques pour la santé
résultant de substances dangereuses émises par des machines —
Partie 2: Méthodologie menant à des procédures de vérification
Reference number
ISO 14123-2:2015(E)
©
ISO 2015
ISO 14123-2:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 14123-2:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Methodology . 1
4.1 General . 1
4.2 Identification of hazardous substances . 1
4.3 Characterization of emissions. 2
4.4 Identification of critical factors . 2
4.5 Specification of indicative parameters . 2
5 Verification . 2
Annex A (normative) Flow diagram of steps leading to verification procedure .3
Annex B (informative) Examples of types of emission and how to assess them .4
Annex C (informative) Examples of relevant factors and their indicative parameters .5
Bibliography . 6
ISO 14123-2:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 199, Safety of machinery.
This second edition cancels and replaces the first edition (ISO 14123-2:1998), of which, by taking
ISO 12100 into account, it constitutes a minor revision.
ISO 14123 consists of the following parts, under the general title Safety of machinery — Reduction of
risks to health resulting from hazardous substances emitted by machinery:
— Part 1: Principles and specifications for machinery manufacturers
— Part 2: Methodology leading to verification procedures
iv © ISO 2015 – All rights reserved
ISO 14123-2:2015(E)
Introduction
The structure of safety standards in the field of machinery is as follows:
a) type-A standards (basic safety standards) giving basic concepts, principles for design, and general
aspects that can be applied to machinery;
b) type-B standards (generic safety standards) dealing with one safety aspect or one type of
safeguard that can be used across a wide range of machinery:
— type-B1 standards on particular safety aspects (for example, safety distances, surface
temperature, noise);
— type-B2 standards on safeguards (for example, two-hand controls, interlocking devices,
pressure-sensitive devices, guards);
c) type-C standards (machine safety standards) dealing with detailed safety requirements for a
particular machine or group of machines.
This document is a type-B1 standard as stated in ISO 12100. Its primary purpose is to give guidance to
th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.