EN 15684:2020
(Main)Building hardware - Mechatronic cylinders - Requirements and test methods
Building hardware - Mechatronic cylinders - Requirements and test methods
This document specifies requirements for performance and testing of Mechatronic Cylinders and their keys and/or electronic keys.
It applies to cylinders for such locks designed to be normally used in buildings. It also applies to cylinders for use with other hardware products such as exit devices, door operators, etc. or monitoring facilities and alarm systems.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack.
This document includes assessment of additional features when they are included in the cylinder design.
This document does not cover any other element of a security system, other than those directly involved in the control of a cylinder.
The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance tests conducted in addition to the performance testing specified by this document (see Annex A).
Schlösser und Baubeschläge - Mechatronische Schließzylinder - Anforderungen und Prüfverfahren
Dieses Dokument legt Anforderungen an die Leistung und Prüfverfahren für mechatronische Schließzylinder und deren Schlüssel und/oder elektronischen Schlüssel fest.
Sie gilt für Schließzylinder von Schlössern, die dafür ausgelegt sind, üblicherweise in Gebäuden verwendet zu werden. Sie gilt ebenfalls für Schließzylinder, die mit anderen Produkten wie beispielsweise Fluchttürverschlüssen, Türautomatikanlagen usw. oder Überwachungseinrichtungen und Alarmanlagen verwendet werden.
Sie legt auf Leistungsprüfungen basierende Gebrauchsklassen sowie Sicherheitsklassen fest, die auf Konstruktionsanforderungen und Leistungsprüfungen, die Angriffe simulieren, beruhen.
Das vorliegende Dokument enthält eine Beurteilung zusätzlicher Eigenschaften, wenn sie Bestandteil der Schließzylinderkonstruktion sind.
Das vorliegende Dokument behandelt keine anderen Elemente eines Systems, als diejenigen, die unmittelbar mit der Bedienung eines Schließzylinders verbunden sind.
Die Eignung von Schließzylindern für die Verwendung an Feuerschutz oder Rauchschutztüren wird durch Prüfungen der Feuerwiderstandsfähigkeit bestimmt, die zusätzlich zu den in dem vorliegenden Dokument geforderten Prüfungen der Funktionsfähigkeit durchzuführen sind, siehe Anhang A.
Quincaillerie pour le bâtiment - Cylindres mécatroniques - Exigences et méthodes d'essai
Le présent document spécifie les exigences de performance et d'essai des cylindres mécatroniques et de leurs clés et/ou de leurs clés électroniques.
Il s'applique aux cylindres de serrures conçues pour être normalement utilisées dans les bâtiments. Il s'applique également aux cylindres devant être utilisés avec d'autres produits de quincaillerie tels que les dispositifs de sortie de secours, les actionneurs de porte, etc. ou avec des installations de surveillance et des systèmes d'alarme.
Il définit des catégories d'utilisation basées sur des essais de performance et des niveaux de sécurité basés sur des exigences de conception et sur des essais de performance simulant une effraction.
Le présent document contient une évaluation de caractéristiques supplémentaires lorsqu’elles sont intégrées dans la conception du cylindre.
Le présent document ne couvre aucun élément d’un système autre que ceux directement mis en jeu dans la manoeuvre d’un cylindre.
L'aptitude des cylindres à être utilisés sur des blocs-portes coupe-feu ou pare-flammes est déterminée par des essais de performance au feu réalisés en complément des essais de performance requis par le présent document ; voir l’Annexe A.
Stavbno okovje - Mehatronski valji - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2021
Nadomešča:
SIST EN 15684:2014
Stavbno okovje - Mehatronski valji - Zahteve in preskusne metode
Building hardware - Mechatronic cylinders - Requirements and test methods
Schlösser und Baubeschläge - Mechatronische Schließzylinder - Anforderungen und
Prüfverfahren
Quincaillerie pour le bâtiment - Cylindres mécatroniques - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 15684:2020
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15684
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2020
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 15684:2012
English Version
Building hardware - Mechatronic cylinders - Requirements
and test methods
Quincaillerie pour le bâtiment - Cylindres Schlösser und Baubeschläge - Mechatronische
mécatroniques - Exigences et méthodes d'essai Schließzylinder - Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 25 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15684:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Requirements . 10
4.1 General. 10
4.2 Category of use . 10
4.3 Durability requirements . 11
4.4 Fire/smoke resistance . 12
4.5 Environmental resistance . 12
4.6 Key related security . 13
4.7 System management . 18
4.8 Attack resistance requirements . 19
4.9 Requirements for product information . 22
5 Testing, assessment and sampling methods . 23
5.1 General. 23
5.2 Operational test . 23
5.3 Performance tests . 25
5.4 Category of use . 25
5.5 Durability tests . 27
5.6 Fire/smoke resistance tests . 28
5.7 Environmental resistance tests . 28
5.8 Key related security . 30
5.9 System Management . 32
5.10 Attack resistance tests . 32
6 Classification system . 41
6.1 Classification. 41
6.2 Category of use (1st character):. 41
6.3 Durability (2nd character): . 41
6.4 Fire/smoke resistance (3rd character): . 41
6.5 Environmental resistance (4th character): . 41
6.6 Mechanical key related security (5th character): . 42
6.7 Credential related security (6th character): . 42
6.8 System Management (7th character): . 42
6.9 Attack resistance (8th character): . 42
6.10 Example of classification . 42
7 Marking . 42
Annex A (normative) Suitability for use on fire/smoke resistant doors . 43
Annex B (normative) Tool sets for attack resistance tests . 44
Annex C (normative) Table of test procedure . 46
Annex D (informative) Manufacturer’s declaration of compliance . 48
Annex E (informative) Examples of calculation of effective code variations for ICC . 50
Bibliography . 52
European foreword
This document (EN 15684:2020) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2021, and conflicting national standards shall be
withdrawn at the latest by May 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15684:2012.
In comparison with EN 15684:2012, the following significant changes have been made:
— Classification - minimum number of codes changed to credential security;
— Classification - attack resistance refers to EN 1303;
— Credential security introduced, with the same principle as in EN 16867.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
Mechanical cylinders have been used to provide security and control of locks. Increasing demand for
higher security, flexibility of master key systems, flow control, copy control of keys, etc. have made it
desirable to incorporate additional functions to such mechanical cylinders, and new technologies have
made it possible to develop electronically controlled cylinders.
Mechanical performance of the mechatronic cylinder is based on EN 1303.
Mechatronic Cylinder can technically be described in three main designs:
— a cylinder with electrical actuator and mechanical operated detaining elements;
— a cylinder with electrically operated locking part and a key for mechanically rotating the plug;
— a cylinder with electrically operated locking part and with manual operated opening/closing
function.
NOTE Motor driven cylinders where the cam is rotated by a motor are not covered by this document.
Increasingly, such Mechatronic Cylinders (MCs) form a part of the security system of a building and may
involve the use of electrical locking and controlling elements.
The performance tests incorporated in this document are considered to be reproducible and as such
will provide a consistent and objective assessment of the performance of these devices throughout CEN
Member States.
It is assumed that MC will conform to the legal regulations, e.g. RED – Radio Equipment Directive
2014/53/EU.
On occasions there may be a need for additional functions within the design of the cylinder. Purchasers
should satisfy themselves that the products are suitable for their intended use. This is particularly
important when the operation of such additional functions is safety-related. Accordingly, this document
includes assessment of such features when they are included in the cylinder design.
1 Scope
This document specifies requirements for performance and testing of Mechatronic Cylinders and their
keys and/or electronic keys.
It applies to cylinders for such locks designed to be normally used in buildings. It also applies to
cylinders for use with other hardware products such as exit devices, door operators, etc. or monitoring
facilities and alarm systems.
It establishes categories of use based on performance tests and grades of security based on design
requirements and on performance tests that simulate attack.
This document includes assessment of additional features when they are included in the cylinder
design.
This document does not cover any other element of a system, other than those directly involved in the
control of a cylinder.
The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance
tests conducted in addition to the performance testing specified by this document; see Annex A.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 636:2012+A1:2015, Plywood — Specifications
EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and
elements of building hardware — Part 1: Fire resistance test for door and shutter assemblies and openable
windows
EN 1634-2, Fire resistance and smoke contro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.