iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12209:2024

(Main)

Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods

Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods

This document specifies product characteristics and test methods of mechanically operated locks and their locking plates.
This document covers mechanically operated locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated multipoint locks and their locking plates which are specified by EN 15685.

Schlösser und Baubeschläge - Mechanisch betätigte Schlösser und Schließbleche - Anforderungen und Prüfverfahren

Dieses Dokument legt Produktmerkmale und Prüfverfahren für mechanisch betätigte Schlösser und deren Schließbleche fest.
Dieses Dokument umfasst mechanisch betätigte Schlösser und deren Schließbleche, die entweder in ihrer Gesamtheit durch einen Hersteller gefertigt und in den Handel gebracht werden oder durch mehr als einen Hersteller aus Baugruppen montiert werden und dazu ausgelegt sind, als Kombination verwendet zu werden.
Dieses Dokument umfasst nicht die Bewertung des Produktbeitrags zum Feuerwiderstand von bestimmten Feuerschutz- und/oder Rauchschutztürelementen.
Dieses Dokument ist nicht anwendbar auf mechanische/elektromechanische Zylinder, Griffe, Schlösser für Fenster, Hangschlösser, Schlösser für Safes, Möbelschlösser oder Gefängnisschlösser.
Dieses Dokument trifft keine Festlegungen für mechanisch betätigte Mehrfachverriegelungen und deren Schließbleche, die in FprEN 15685 behandelt werden.

Quincaillerie pour le bâtiment - Serrures mécaniques et gâches - Exigences et méthodes d'essai

Le présent document spécifie les caractéristiques et les méthodes d'essai des serrures mécaniques et de leurs gâches.
Le présent document couvre les serrures mécaniques et leurs gâches qui sont soit fabriquées et mises sur le marché dans leur intégralité par un seul fabricant, soit assemblées à partir de sous-ensembles produits par plusieurs fabricants et conçus pour être combinés.
Le présent document ne couvre pas l’évaluation de la contribution du produit à la résistance au feu des blocs-portes coupe-feu et/ou pare-fumée spécifiques.
Le présent document ne s'applique pas aux cylindres mécaniques/électromécaniques, aux béquilles et boutons de porte, aux cadenas, aux serrures de coffre-fort, aux serrures de mobiliers ou de prison.
Le présent document ne spécifie pas les serrures mécaniques multipoints et leurs gâches, qui sont définies dans l’ EN 15685.

Stavbno okovje - Mehanske ključavnice in prijemniki - Značilnosti in preskusne metode

General Information

Status
Published
Publication Date
10-Dec-2024
ICS
91.190 - Building accessories
Technical Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Drafting Committee
CEN/TC 33/WG 4 - Building hardware
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Dec-2024
Due Date
11-Dec-2024
Completion Date
11-Dec-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
Ref Project
SIST EN 12209:2025 - Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods

Relations

Replaces
EN 12209:2016 - Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
Effective Date
19-Jan-2023

Buy Standard

EN 12209:2025EN 12209:2025
PreviousNext
Standard
EN 12209:2025
English language
78 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2025
Stavbno okovje - Mehanske ključavnice in prijemniki - Značilnosti in preskusne
metode
Building hardware - Mechanically operated locks and locking plates - Characteristics and
test methods
Schlösser und Baubeschläge - Mechanisch betätigte Schlösser und Schließbleche -
Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Serrures mécaniques et gâches - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 12209:2024
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 12209
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 12209:2016
English Version
Building hardware - Mechanically operated locks and
locking plates - Characteristics and test methods
Quincaillerie pour le bâtiment - Serrures mécaniques Schlösser und Baubeschläge - Mechanisch betätigte
et gâches - Exigences et méthodes d'essai Schlösser und Schließbleche - Anforderungen und
Prüfverfahren
This European Standard was approved by CEN on 27 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12209:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions, symbols and abbrevations . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviations . 11
4 Product characteristics . 11
4.1 General . 11
4.1.1 Essential characteristics . 11
4.1.2 Dangerous substances . 12
4.1.3 Return force of latch bolt . 12
4.1.4 Strength of lever lock key . 12
4.1.5 Strength of bolt actions . 13
4.1.6 Minimum follower restoring torque . 13
4.2 Category of use (first digit) . 13
4.2.1 Resistance to side force on latch bolt . 13
4.2.2 Torque to operate the lock . 13
4.2.3 Strength of follower stops . 14
4.2.4 Torque resistance for lockable deadbolt operation by handle/knob . 15
4.3 Durability characteristics (second digit) . 17
4.3.1 Durability of latch operation . 17
4.3.2 Durability of deadbolt mechanism . 17
4.3.3 Durability of locking snib mechanism. 17
4.4 Door mass and door closing force (third digit) . 18
4.4.1 Door mass . 18
4.4.2 Door closing force . 18
4.5 Suitability for use on fire resistance and/or smoke control door set (fourth digit) . 18
4.5.1 General . 18
4.5.2 Grade 0 . 18
4.5.3 Grade A . 19
4.5.4 Grade B . 19
4.5.5 Grade N . 19
4.6 Safety (fifth digit) . 19
4.7 Corrosion resistance and temperature (sixth digit) . 19
4.7.1 Corrosion resistance . 19
4.7.2 Operation at extreme temperatures . 20
4.8 Security (seventh digit) . 20
4.8.1 General . 20
4.8.2 Locking . 20
4.8.3 Deadlocking . 20
4.8.4 Torque resistance of knob of tubular lock . 21
4.8.5 Characteristics for side force . 21
4.8.6 Locking point projection . 22
4.8.7 Resistance to force in the unlocking direction (disengaging force) . 23
4.8.8 Characteristics for pulling of anti-separation bolt . 24
4.8.9 Characteristics for anti-lifting devices in sliding door locks . 25
4.8.10 Requirement for torque resistance of lockable followers . 26
4.8.11 Strong key attack on lever locks . 27
4.8.12 Resistance to force on box protected locking plates . 27
4.8.13 Resistance to side force on locking plates . 28
4.8.14 Resistance to pulling on locking plates . 28
4.8.15 Resistance to lifting force on locking plates . 28
4.8.16 Protection against removal from door . 28
4.9 Key identification characteristics of lever locks (eight digit) . 34
4.9.1 Minimum number of detaining elements. 34
4.9.2 Minimum number of effective differs . 34
4.9.3 Differing steps height on key . 34
4.9.4 Non-interpassing of keys with just one interval differ . 34
4.9.5 Coding protection . 34
5 Test, assessment and sampling methods . 35
5.1 General . 35
5.2 Test apparatus . 37
5.2.1 Test door . 37
5.2.2 Drill machine . 37
5.2.3 Test fixtures . 37
5.3 Test procedure - Drilling procedure . 37
5.4 Test methods - general . 38
5.4.1 Dangerous substances verification . 38
5.4.2 Return force of latch bolt . 38
5.4.3 Strength of lever lock key . 38
5.4.4 Strength of bolt actions . 38
5.4.5 Minimum follower restoring torque . 39
5.4.6 Protection against removal from door . 39
5.5 Test methods - Category of use . 39
5.5.1 Resistance to side force on latch bolt . 39
5.5.2 Torque to operate the lock . 41
5.5.3 Strength of follower stops .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15685:2024(Main)
Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods
SIST EN 15685:2025

This document specifies product characteristics and test methods of mechanically operated multipoint locks and their locking plates.
This document covers multipoint locks their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated locks or their locking plates which are specified by EN 12209.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16867:2020+A2:2024(Main)
Building hardware - Mechatronic door furniture - Requirements and test methods
SIST EN 16867:2020+A2:2024

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16035:2023(Main)
Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
SIST EN 16035:2024

This document summarizes relevant results and classifications from tests of the fire and smoke resistance performance of building hardware in the format of a hardware performance sheet (HPS). This document provides guidance and requirements on the minimum data required as a basis for the preparation of EXAP reports for the interchangeability of building hardware on fire-retardant and/or smoke-tight doors and openable windows.
This document identifies the performance characteristics and the requirements for building hardware which can be found in the appropriate product standards.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-3:2023(Main)
Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware
SIST EN 13126-3:2023

This part of the EN 13126 series specifies the requirements and test procedures for durability, strength, security and functionality of handles.
This document is applicable to Tilt and Turn, Tilt-First and Turn-Only hardware for use on windows and door-height windows.
Handles can also be used on other opening types, e.g. on In-line Sliding, Tilt and Slide, Sliding Folding, horizontal and vertical-pivoting windows.
This document is not applicable to:
a)   operation devices, door handles for door latches and door locks (for this, refer to EN 1906);
b)   handles with handle length > 170 mm (refer to Figure B.1).

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17610:2022(Main)
Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware
SIST EN 17610:2022

This document provides product category rules (PCR) for Type III environmental declarations for:
- Building hardware products for opening and closing doors, gates, windows and shutters:
-- Lever handles and knob furniture (EN 1906);
-- Single-axis hinges (EN 1935);
-- Hardware for windows and door height windows (EN 13126 (all parts));
-- Fittings for shutters (e.g. EN 14648);
-- Controlled door closing devices, electrically powered hold-open devices for swing doors and door coordinator devices (EN 1154, EN 1155, EN 1158);
-- Hardware for sliding doors, folding doors and roll fronts (EN 1527, EN 15706);
-- Glass door gear;
- Building hardware products for locking and unlocking doors, gates, windows and shutters:
-- Mechanically operated locks and locking plates, multipoint locks, latches and locking plates (EN 12209, EN 15685 );
-- Cylinders for locks (EN 1303);
-- Padlocks and padlock fittings (EN 12320);
-- Mechanically operated push-button locksets (BS 8607);
-- Emergency exit devices operated by a lever handle or push pad, for use on escape routes and panic exit devices operated by a horizontal bar, for use on escape routes (EN 179, EN 1125);
- Electromechanical building hardware products:
-- Mechatronic cylinders (EN 15684);
-- Mechatronic padlocks (EN 16864);
-- Mechatronic door furniture (EN 16867);
-- Electromechanically operated locks and striking plates (EN 14846);
-- Electrically controlled exit systems for use on escape routes (EN 13637).
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17814:2022(Main)
Building hardware - Master Key System data protection - Guidance
SIST-TS CEN/TS 17814:2022

This document specifies requirements and procedures to achieve and maintain protection of data and sensitive information related to mechanical Master Key Systems and other mechanical key systems where customer or application related data are being processed throughout the process of planning, production, installation, and maintenance.
The requirements and test methods for mechanical cylinder locks is covered by EN 1303.
Reference is made to EN 1303 and Annexes relating to Master Key Systems (MKS).
Requirements relating to the information security of key based and non-key based electronic cylinders are not covered.

  • Technical specification
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-16:2019/AC:2022(Corrigendum)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows
SIST EN 13126-16:2019/AC:2022

This part of EN 13126 specifies requirements and test methods for durability, strength, security and function of hardware for Lift and Slide windows and door height windows in accordance with common application as shown in informative Annex C, regardless of whether the hardware enables an additional tilt position.
NOTE 1   This document is also applicable to hardware systems, whereby the sash itself is not lifted but a gasket mechanism is moved.
NOTE 2   This document is also applicable to hardware systems, whereby the sash itself is not lifted but the sash is being moved parallel to the plane of the frame.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-13:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 13: Sash balances
SIST EN 13126-13:2022

This document specifies requirements and test methods for durability, strength, security and function of sash balances.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-14:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners
SIST EN 13126-14:2022

This document specifies requirements and test methods for durability, strength, security, and function of sash fasteners for windows and door height windows.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13126-1:2022(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
SIST EN 13126-1:2022

This document specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware.
This document is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window.
Table 1 - Window opening-types
This document does not apply to the following:
—   fusible links;
—   hardware for lifting side-hung windows;
—   fixing devices that are used to assemble or install a fixed window;
—   devices that are used for the permanent fixing of a complete window into a building structure;
—   mechanisms for the pneumatic or hydraulic remote operation of windows;
—   single axis hinges (other than those, which provide a pivot-function for windows);
—   single axis hinges as covered in EN 1935;
—   hardware for sliding doors and folding doors as covered in EN 1527;
—   door and window bolts as covered in EN 12051.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day