EN 14351-1:2006

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens.
This European Standard applies to:
-   Manually or power operated windows, French windows and screens for installation in vertical wall apertures and roof windows for installation in inclined roofs, complete with:
·   related hardware, if any;
·   weather stripping, if any;
·   glazed apertures when intended to have glazed apertures;
·   with or without incorporated shutters and/or shutterboxes and/or blinds;
and manually or power operated windows, roof windows, French windows and screens that are
·   fully or partially glazed including any non-transparent infill;
·   fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding).
-   Manually or power operated external pedestrian doorsets with flush or panelled leaves, complete with:
·   integral fanlights, if any;
·   adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The products covered by this European Standard are not assessed for structural applications.
This European Standard does not apply to:
-   windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 14351-3);
-   rooflights according to EN 1873 and prEN 14963;
-   curtain walling according to EN 13830;
-   industrial, commercial and garage doors and gates according to EN 13241-1;
-   internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance requirements given in clause 4 can be relevant for  internal  doors (see prEN 14351-2)
(...)

Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren ohne Eigenschaften bezüglich Feuerschutz und/oder Rauchdichtheit

Diese Europäische Norm gibt materialunabhängige Leistungseigenschaften an und gilt für Fenster (auch Dachflächenfenster, Dachflächenfenster mit Schutz gegen Brand von außen und Fenstertüren), Außentüren (einschließlich rahmenlose Glastüren, Flucht  und Paniktüren) und zusammengesetzte Elemente.
Diese Europäische Norm gilt für:
-   hand- oder kraftbetätigte Fenster, Fenstertüren und zusammengesetzte Elemente zum Einbau in vertikale Wandöffnungen und Dachflächenfenster zum Einbau in geneigte Dächer mit:
-   zugehörigen Beschlägen, sofern vorhanden;
-   Dichtungen, sofern vorhanden;
-   verglasten Öffnungen, sofern verglaste Öffnungen vorgesehen sind;
-   mit oder ohne eingebaute Rollläden und/oder Rollladenkästen und/oder Abschlüssen;
sowie hand- oder kraftbetätigte Fenster, Dachflächenfenster, Fenstertüren und zusammengesetzte Elemente, die
-   vollständig oder teilweise verglast einschließlich nicht transparenter Füllungen;
-   feststehend oder teilweise feststehend oder mit einem oder mehreren zu öffnenden Flügeln (z. B. Klappflügel, Schwingflügel, Drehflügel, Schiebeflügel).
-   hand- oder kraftbetätigte Außentüren mit Sperr  oder Füllungstürblättern, ergänzt mit:
-   integrierten Oberlichtern, sofern vorhanden;
-   angrenzenden Seitenteilen, sofern vorhanden, in einem einzigen (gemeinsamen) Rahmen oder Zarge zum Einbau in eine gemeinsame Öffnung.
Die in dieser Europäischen Norm beschriebenen Produkte sind nicht für eine Anwendung als tragende Bauteile geeignet.
Diese Europäische Norm gilt nicht für:
-   Fenster und Türen, die im Hinblick auf Rauchdichtheit und Feuerschutz den Bestimmungen von prEN 14351-3 unterliegen, aber einzelne Eigenschaften und Leistungsanforderungen nach Abschnitt 4 können für diese Türen und Fenster von Bedeutung sein (siehe prEN 14351 3);
-   Lichtkuppeln nach EN 1873 und prEN 14963;
-   Vorhangfassaden nach EN 13830;
-   Tore nach EN 13241 1;
-   Innentüren nach prEN 14351 2, aber einzelne Eigenschaften und Leistungsanforderungen nach Abschnitt 4 k

Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1: Fenêtres et blocs portes extérieurs pour piétons sans caractéristiques de résistance au feu et/ou dégagement de fumée

Le présente Norme européenne détermine les caractéristiques de performance, indépendantes des matériaux, qui sont applicables aux fenêtres (en y incluant fenêtres de toit, fenêtres de toit résistantes aux feux extérieurs et portes fenêtres), aux blocs portes extérieurs pour piétons (en y incluant portes vitrées sans châssis, blocs portes pour issue de secours) et aux ensembles composés.
Le présente Norme européenne s’applique aux :
-   fenêtres, portes fenêtres et ensembles composés manuels ou motorisés pour être mis en œuvre dans des ouvertures de parois verticales et aux fenêtres de toit pour être mises en œuvre dans des toitures inclinées, complétés  :
·   de la quincaillerie, si elle existe ;
·   des joints d’étanchéité, s’ils existent ;
·   des ouvertures vitrées s’ils doivent en recevoir ;
·   avec ou sans volets incorporés et/ou coffres de volets et/ou stores ;
et les fenêtres, portes-fenêtres et fenêtres de toit manuelles ou motorisées qui sont :
·   complètement ou partiellement vitrées, incluant tout remplissage opaque ;
·   fixes ou partiellement fixes ou ouvrantes avec un ou plusieurs vantaux (par exemple battantes, à projection, pivotantes, coulissantes) ;
-   blocs portes extérieurs manuels ou motorisés pour piétons,  avec vantaux plans ou menuisés, complétés :
·   d’impostes, si elles existent ;
·   de parties adjacentes qui sont intégrées dans un châssis individuel afin d’être installé dans une seule ouverture, si elles existent.
Les produits couverts par la présente Norme européenne ne sont pas destinés à des applications structurelles.
La présente Norme européenne ne s’applique pas aux :
-   fenêtres et blocs portes pour piétons soumis à des réglementations concernant le dégagement de fumée et la résistance au feu qui relèvent du prEN 14351-3 mais des caractéristiques individuelles et des exigences de performances données à l’Article 4 peuvent être adaptées à ces portes et fenêtres (voir prEN 14351-3) ;

Okna in vrata - Standard za proizvod, zahtevane lastnosti - 1. del: Okna in vrata brez določenih lastnosti požarne odpornosti in dimnotesnosti, vendar z vključeno odpornostjo strešnih oken proti požaru z zunanje strani

General Information

• Status: Withdrawn
• Publication Date: 28-Mar-2006
• Withdrawal Date: 09-Mar-2010
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Mar-2010
• Completion Date: 10-Mar-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 89/106/EEC - Construction products
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 14351-1:2006 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

Relations

• Merged Into: EN 14351-1:2006+A1:2010 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
• Effective Date: 18-Jan-2023
• Amended By: EN 14351-1:2006/FprA1 - Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristicsFenetres et portes - Norme produit, caractéristiques de performance - Partie 1: Fenetres et blocs portes extérieurs pour piétons sans caractéristiques de résistance au feu et/ou dégagement de fuméeFenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren ohne Eigenschaften bezüglich Feuerschutz und/oder RauchdichtheitTa slovenski standard je istoveten z:EN 14351-1:2006SIST EN 14351-1:2006en91.060.50ICS:SLOVENSKI
STANDARDSIST EN 14351-1:200601-maj-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14351-1March 2006ICS 91.060.50 English VersionWindows and doors - Product standard, performancecharacteristics - Part 1: Windows and external pedestriandoorsets without resistance to fire and/or smoke leakagecharacteristicsFenêtres et blocs portes pour piétons - Norme produit,caractéristiques de performance - Partie 1 : Fenêtres etblocs portes extérieurs pour piétons sans caractéristiquesde résistance au feu, de dégagement de fumée et de feuextérieur, incluant les performances concernant les feuxextérieurs des fenêtres de toitFenster und Türen - Produktnorm, Leistungseigenschaften- Teil 1: Fenster und Außentüren ohne Eigenschaftenbezüglich Feuerschutz und Rauchdichtheit, aber mit Schutzgegen Brand von außen für DachflächenfensterThis European Standard was approved by CEN on 3 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14351-1:2006: E

Interdependence between characteristics and components.25 Annex B (normative)
Determination of sound insulation of windows.28 Annex C (informative)
Standards and draft standards on glass.32 Annex D (informative)
Examples of performance and requirement profiles of a roof window.33 Annex E (normative)
Determination of characteristics.35 Annex F (informative)
Optional selection of representative test specimens for windows.39

Examples of test sequences for optional combined determination of characteristics for windows.41 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Product Directive.42 Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.54 Annex ZC (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 73/23/EEC.55 Bibliography.56
Figures Figure 1 — Relationship between various standards.4 Tables Table 1 — Classification of characteristics for windows.16 Table 2 — Classification of characteristics for external pedestrian doorsets.18 Table A.1 — Interdependence between characteristics and components.26 Table B.1 — Rw for window based on Rw for IGU.30 Table B.2 — Rw + Ctr for window based on Rw + Ctr for IGU.30 Table B.3 — Extrapolation rules for different window sizes.31 Table D.1 — Examples of performance and requirement profiles of a roof window.33 Table E.1 — Separate determination of characteristics for windows.35 Table E.2 — Separate determination of characteristics for external pedestrian doorsets.37 Table F.1 — Optional selection of representative test specimens for windows.39 Table G.1 — Examples of optional test sequences for combined determination of characteristics for windows41 Table ZA.1 — Relevant clauses (performance characteristics).43 Table ZA.2 — System(s) of attestation of conformity (AoC) for external pedestrian doorsets and windows (including roof windows).45 Table ZA.3a — Assignation of evaluation of conformity tasks for products under AoC system 1.47 Table ZA.3b — Assignation of evaluation of conformity tasks for products under AoC system 3.49

Figure 1 — Relationship between various standards Parts of this European Standard have been prepared under the mandates M/101 (M/126) and M/122 given to CEN by the European Commission and the Free Trade Association and support the essential requirements of European Directives. For relationship with European Directives, see informative Annexes ZA, ZB and ZC, which are integral parts of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and United Kingdom.
EN 14351-1, Windows and doors - Product standard, performance characteristics - Part 1: Windows and ex-ternal pedestrian doorsets without resistance to fire and/or smoke leakage char-acteristics
(Harmonized standard)
prEN 14351-3, Windows and doors - Product stan-dard, performance charac-teristics - Part 3: Windows and pedestrian doorsets with resistance to fire and/or smoke leakage characteris-tics (Harmonized standard)
EN 14600, Doorsets and openable windows with fire resisting and/or smoke control characteristics -
Requirements and classification
Supporting standards, prepared by CEN/TC 33 orothers TCs, identified in Clause 2 of the supportedstandards
prEN 14351-2, Windows and doors - Product stan-dard, performance charac-teristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteris-tics (Harmonized standard)
...