EN 12846:2002
(Main)Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer
Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer
This European Standard specifies a method for the determination of the efflux time of bitumen emulsions.
NOTE For the purposes of this European Standard, the term "% (m/m)" is used to represent the mass fraction.
WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausflusszeit von Bitumenemulsionen mittels Ausflussviskosimeter
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Auslußzeit von Bitumenemulsionen fest.
Bitumes et liants bitumineux - Détermination du temps d'écoulement des émulsions de bitume à l'aide d'un viscosimètre à écoulement
Domaine d'application
La présente Norme européenne prescrit une méthode pour la détermination du temps d'écoulement des émulsions de bitume.
NOTE Pour les besoins de la présente Norme européenne, le terme « % (m/m) » est utilisé pour représenter la fraction massique.
AVERTISSEMENT L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'a pas la prétention d'aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje viskoznosti bitumenskih emulzij z iztočnim viskozimetrom
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2003
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHYLVNR]QRVWLELWXPHQVNLKHPXO]LM]
L]WRþQLPYLVNR]LPHWURP
Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by
the efflux viscometer
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausflusszeit von
Bitumenemulsionen mittels Ausflussviskosimeter
Bitumes et liants bitumineux - Détermination du temps d'écoulement des émulsions de
bitume a l'aide d'un viscosimetre a écoulement
Ta slovenski standard je istoveten z: EN 12846:2002
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12846
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 75.140; 91.100.50
English version
Bitumen and bituminous binders - Determination of efflux time of
bitumen emulsions by the efflux viscometer
Bitumes et liants bitumineux - Détermination du temps Bitumen und bitumenhaltige Bindemittel - Bestimmung der
d'écoulement des émulsions de bitume à l'aide d'un Ausflusszeit von Bitumenemulsionen mittels
viscosimètre à écoulement Ausflussviskosimeter
This European Standard was approved by CEN on 15 February 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12846:2002 E
worldwide for CEN national Members.
Foreword
This document EN 12846:2002 has been prepared by Technical Committee CEN/TC 336 "Bituminous binders", the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest
by November 2002.
This European Standard is part of a package including 14 standards: EN 1428, EN 1429, EN 1430, EN 1431,
EN 12846, EN 12847, EN 12848, EN 12849, EN 12850, EN 13074, EN 13075-1, EN 13075-2, EN 13614 and
EN 13808.
Annex A forms a normative part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
1 Scope
This European Standard specifies a method for the determination of the efflux time of bitumen emulsions.
NOTE For the purposes of this European Standard, the term “% (m/m)” is used to represent the mass fraction.
WARNING – The use of this standard can involve hazardous materials, operations and equipment. This
standard does not purport to address all of the safety problems associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and
determine the applicability of regulatory limitations prior to use.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the
publication referred to applies (including amendments).
)
EN 58 , Bitumen and bituminous binders - Sampling bituminous binders.
EN 12594, Bitumen and bituminous binders - Preparation of test samples.
ISO 4788, Laboratory glassware - Graduated measuring cylinders.
3 Terms and definitions
For the purposes of this European Standard, the following term and definition apply.
3.1
efflux time
time required for a specified volume of emulsion to flow out of the cup of a specified efflux viscometer
NOTE Efflux time gives an indication of the pseudoviscosity of a bitumen emulsion.
4 Principle
The efflux time of a bitumen emulsion is determined, using an efflux viscometer, as the time of efflux of a given
quantity of the emulsion through an orifice of a specified size at a specified temperature.
5 Reagents and materials
5.1 Light mineral oil
5.2 Solution Sa
An aqueous solution containing 1 % (m/m) of sodium lauryl sulfate or, failing that, an aqueous solution containing
1 % (m/m) of sodium oleate. In these solutions, 1 % (m/m) of sodium hydroxide shall be added.
This type of solution shall be used for testing anionic emulsions.
)
In course of revision.
NOTE Solution Sa can be prepared also using potassium lauryl sulfate, potassium oleate and potassium hydroxide.
5.3 Solution Sc
An aqueous solution containing 1 % (m/m) of alkyltrimethylammonium chloride or 1 % (m/m) of
cetyltrimethylammonium bromide or, failing those, 1 % (m/m) of fatty amine hydrochloride. In these solutions,
1 % (m/m) of 1 mol/l hydrochloric acid shall be added.
This solution shall be used for testing cationic emulsions.
NOTE The aqueous solutions (5.2) and (5.3) can be replaced by aqueous phases of the same ionic structure as the tested
emulsion.
6 Apparatus
Usual laboratory apparatus and glassware, together with the following:
6.1 Efflux viscometer of the type shown in Figure 1, utilizing viscometer-cups with orifices of 10 mm, 4 mm or
2 mm in diameter fitted with a ball-and-socket valve of the appropriate size as indicated in Figure 2.
Choose the diameter of the orifice of the cup amongst the following conditions:
Table 1 – Diameter of the orifice of the cup
Orifice size, mm Efflux time, s
min max
10 and 4 5 Non continuous flow
2 5 Non continuous flow
The viscometer cups shall be provided with stoppers suitable for closing the orifices with the ball valve in position,
and some means of covering the cups to prevent evaporation of water.
The viscometer-cup holder shall be capable of:
supporting one or more cups in a vertical position;
providing a clearance of 280 mm ± 20 mm between the bottom of the orifice of the cup and the base on which
the holder stands;
providing a means of maintaining the test material in the cup at the test temperature during the period of efflux;
providing a valve support to hold the valve 16 mm ± 1 mm vertically above the orifice of the cup during efflux of
the test materia
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.