Health informatics - Device interoperability - Part 10408: Personal health device communication - Device specialization - Thermometer (ISO/IEEE 11073-10408:2022)

Within the context of the ISO/IEEE 11073 family of standards for device communication, this document establishes a normative definition of communication between personal telehealth thermometer devices and compute engines (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology, information models, application profile standards, and transport standards. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting optionality in base frameworks in favor of interoperability. This document defines a common core of communication functionality for personal telehealth thermometer devices.

Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10408: Gerätespezifikation - Thermometer (ISO/IEEE 11073-10408:2022)

Informatique de santé - Interopérabilité des dispositifs - Partie 10408: Communication entre dispositifs de santé personnels - Spécialisation des dispositifs - Thermomètre (ISO/IEEE 11073-10408:2022)

Dans le contexte de la famille de normes ISO/IEEE 11073 relatives à la communication entre des dispositifs, le présent document établit une définition normative de la communication entre des dispositifs thermométriques personnels de télésanté et des moteurs informatiques (par exemple des téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers décodeurs) d’une manière qui permet une interopérabilité de type prêt à l’emploi. Elle s’appuie sur les parties appropriées de normes existantes, y compris la terminologie, des modèles d’informations, des normes de profils d’applications et des normes de transport de l’ISO/IEEE 11073. Elle spécifie l’utilisation de codes, de formats et de comportements en termes spécifiques dans les environnements de télésanté en limitant les choix à des cadres de travail de base en faveur de l’interopérabilité. Le présent document définit un noyau commun de fonctionnalités de communication pour les dispositifs thermométriques personnels de télésanté.

Zdravstvena informatika - Interoperabilnost naprav - 10408. del: Komunikacija osebnih medicinskih naprav - Specialne naprave - Termometer (ISO/IEEE/FDIS 11073-10408:2022)

General Information

Status
Published
Publication Date
20-Dec-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Dec-2022
Completion Date
21-Dec-2022

Relations

Buy Standard

Draft
prEN ISO/IEEE 11073-10408:2022
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/IEEE 11073-10408:2022
01-september-2022
Zdravstvena informatika - Interoperabilnost naprav - 10408. del: Komunikacija
osebnih medicinskih naprav - Specialne naprave - Termometer (ISO/IEEE/FDIS
11073-10408:2022)

Health informatics - Device interoperability - Part 10408: Personal health device

communication - Device specialization - Thermometer (ISO/IEEE/FDIS 11073-
10408:2022)

Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -

Teil 10408: Gerätespezifikation - Thermometer (ISO/IEEE/FDIS 11073-10408:2022)

Informatique de santé - Interopérabilité des dispositifs - Partie 10408: Communication

entre dispositifs de santé personnels - Spécialisation des dispositifs - Thermomètre

(ISO/IEEE/FDIS 11073-10408:2022)
Ta slovenski standard je istoveten z: prEN ISO/IEEE 11073-10408
ICS:
11.040.55 Diagnostična oprema Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
oSIST prEN ISO/IEEE 11073-10408:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-10408
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
2022-06-16
Part 10408:
Voting terminates on:
Personal health device communication
2022-11-03
— Device specialization —
Thermometer
Informatique de santé — Interopérabilité des dispositifs —
Partie 10408: Communication entre dispositifs de santé personnels —
Spécialisation des dispositifs — Thermomètre
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEEE FDIS 11073-10408:2022(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE FDIS 11073-10408:2022(E)
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-10408
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
Part 10408:
Voting terminates on:
Personal health device communication
— Device specialization —
Thermometer
Informatique de santé — Interopérabilité des dispositifs —
Partie 10408: Communication entre dispositifs de santé personnels —
Spécialisation des dispositifs — Thermomètre
COPYRIGHT PROTECTED DOCUMENT
ISO/CEN PARALLEL PROCESSING
© IEEE 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.

RECIPIENTS OF THIS DRAFT ARE INVITED TO
Institute of Electrical and Electronics Engineers, Inc
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
3 Park Avenue, New York
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
NY 10016-5997, USA
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: stds.ipr@ieee.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/IEEE FDIS 11073­10408:2022(E)
Website: www.ieee.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
© IEEE 2022 – All rights reserved
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE FDIS 11073-10408:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted (see www.iso.org/directives).

IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating

Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its

standards through a consensus development process, approved by the American National Standards

Institute, which brings together volunteers representing varied viewpoints and interests to achieve the

final product. Volunteers are not necessarily members of the Institute and serve without compensation.

While the IEEE administers the process and establishes rules to promote fairness in the consensus

development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the

information contained in its standards.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any

patent rights identified during the development of the document will be in the Introduction and/or on

the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the World

Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

ISO/IEEE 11073-10408 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in

Medicine and Biology Society (as IEEE Std 11073-10408-2019) and drafted in accordance with its editorial

rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development

Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health

informatics.

This second edition cancels and replaces the first edition (ISO/IEEE 11073-10408:2010), which has been

technically revised.

A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
---------------------- Page: 6 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
IEEE Std 11073-10408™-2019
(Revision of IEEE Std 11073-10408-2008)
Health informatics—Personal health device communication
Part 10408: Device specialization—
Thermometer
Developed by the
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 7 November 2019
IEEE SA Standards Board
---------------------- Page: 7 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)

Abstract: Within the context of the ISO/IEEE 11073 family of standards for device

communication, this standard establishes a normative definition of communication between

personal telehealth thermometer devices and compute engines (e.g., cell phones, personal

computers, personal health appliances, and set top boxes) in a manner that enables plug-and-

play interoperability. It leverages appropriate portions of existing standards including

ISO/IEEE 11073 terminology, information models, application profile standards, and transport

standards. It specifies the use of specific term codes, formats, and behaviors in telehealth

environments restricting optionality in base frameworks in favor of interoperability. This standard

defines a common core of communication functionality for personal telehealth thermometer

devices.

Keywords: IEEE 11073-10408™, medical device communication, personal health devices,

thermometer
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2019 by The Institute of Electrical and Electronics Engineers, Inc.

All rights reserved. Published 23 December 2019. Printed in the United States of America.

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,

Incorporated.
PDF: ISBN 978-1-5044-6361-4 STD24006
Print: ISBN 978-1-5044-6362-1 STDPD24006
IEEE prohibits discrimination, harassment, and bullying.

For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission

of the publisher.
---------------------- Page: 8 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents

IEEE documents are made available for use subject to important notices and legal disclaimers. These

notices and disclaimers, or a reference to this page, appear in all standards and may be found under the

heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be

obtained on request from IEEE or viewed at http://standards.ieee.org/ipr/disclaimers.html.

Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents

IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are

developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards

Association (“IEEE SA”) Standards Board. IEEE (“the Institute”) develops its standards through a

consensus development process, approved by the American National Standards Institute (“ANSI”), which

brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE

Standards are documents developed through scientific, academic, and industry-based technical working

groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate

without compensation from IEEE. While IEEE administers the process and establishes rules to promote

fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the

accuracy of any of the information or the soundness of any judgments contained in its standards.

IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure

against interference with or from other devices or networks. Implementers and users of IEEE Standards

documents are responsible for determining and complying with all appropriate safety, security,

environmental, health, and interference protection practices and all applicable laws and regulations.

IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and

expressly disclaims all warranties (express, implied and statutory) not included in this or any other

document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness

for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness

of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.

IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”

Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there

are no other ways to produce, test, measure, purchase, market, or provide other goods and services related

to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved

and issued is subject to change brought about through developments in the state of the art and comments

received from users of the standard.

In publishing and making its standards available, IEEE is not suggesting or rendering professional or other

services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any

other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his

or her own independent judgment in the exercise of reasonable care in any given circumstances or, as

appropriate, seek the advice of a competent professional in determining the appropriateness of a given

IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 9 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
Translations

The IEEE consensus development process involves the review of documents in English only. In the event

that an IEEE standard is translated, only the English version published by IEEE should be considered the

approved IEEE standard.
Official statements

A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board

Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its

committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,

symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall

make it clear that his or her views should be considered the personal views of that individual rather than the

formal position of IEEE.
Comments on standards

Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of

membership affiliation with IEEE. However, IEEE does not provide consulting information or advice

pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a

proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a

consensus of concerned interests, it is important that any responses to comments and questions also receive

the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and

Standards Coordinating Committees are not able to provide an instant response to comments or questions

except in those cases where the matter has previously been addressed. For the same reason, IEEE does not

respond to interpretation requests. Any person who would like to participate in revisions to an IEEE

standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations

Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with

the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory

requirements. Implementers of the standard are responsible for observing or referring to the applicable

regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not

in compliance with applicable laws, and these documents may not be construed as doing so.

Copyrights

IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.

They are made available by IEEE and are adopted for a wide variety of both public and private uses. These

include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,

and the promotion of engineering practices and methods. By making these documents available for use and

adoption by public authorities and private users, IEEE does not waive any rights in copyright to the

documents.
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 10 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
Photocopies

Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to

photocopy portions of any individual standard for company or organizational internal use or individual,

non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance

Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission

to photocopy portions of any individual standard for educational classroom use can also be obtained

through the Copyright Clearance Center.
Updating of IEEE Standards documents

Users of IEEE Standards documents should be aware that these documents may be superseded at any time

by the issuance of new editions or may be amended from time to time through the issuance of amendments,

corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the

document together with any amendments, corrigenda, or errata then in effect.

Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years

old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of

some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that

they have the latest edition of any IEEE standard.

In order to determine whether a given document is the current edition and whether it has been amended

through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore at https://ieeexplore.ieee.org

or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEE’s

standards development process, visit the IEEE SA Website at http://standards.ieee.org.

Errata

Errata, if any, for IEEE standards can be accessed via https://standards.ieee.org/standard/index.html. Search

for standard number and year of approval to access the web page of the published standard. Errata links are

located under the Additional Resources Details section. Errata are also available in IEEE Xplore:

https://ieeexplore.ieee.org/browse/standards/collection/ieee/. Users are encouraged to periodically check for

errata.
Patents

Attention is called to the possibility that implementation of this standard may require use of subject matter

covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to

the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant

has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the

IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may

indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without

compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of

any unfair discrimination to applicants desiring to obtain such licenses.

Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not

responsible for identifying Essential Patent Claims for which a license may be required, for conducting

inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or

conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing

agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that

determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely

their own responsibility. Further information may be obtained from the IEEE Standards Association.

Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 11 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
Participants

At the time this standard was completed, the Personal Health Devices Working Group had the following

membership:
Daidi Zhong, Co-chair
Michael J. Kirwan, Co-chair
Karsten Aalders Rick Geimer
James Cheng
Charles R. Abbruscato
Peggy Chien Igor Gejdos
Nabil Abujbara David Chiu Ferenc Gerbovics
Maher Abuzaid Jinyong Choi Alan Godfrey
James Agnew Chia-Chin Chong Nicolae Goga
Haidar Ahmad Saeed A. Choudhary Julian Goldman
Manfred Aigner Jinhan Chung Raul Gonzalez Gomez
Jorge Alberola Malcolm Clarke Chris Gough
Murtaza Ali John A. Cogan Channa Gowda
Rolf Ambuehl John T. Collins Charles M. Gropper
David Aparisi Cory Condek Amit Gupta
Paolo Ariano Todd H. Cooper Jeff Guttmacher
Lawrence Arne David Cornejo Rasmus Haahr
Diego B. Arquillo Douglas Coup Christian Habermann
Serafin Arroyo Nigel Cox Michael Hagerty
Muhammad Asim Jerry Hahn
Hans Crommenacker
Merat Bagha Tomio Crosley Robert Hall
Doug Baird Allen Curtis Shu Han
David Baker Ndifor Cyril Fru Nathaniel Hamming
Anindya Bakshi Jesús Daniel Trigo Rickey L. Hampton
Ananth Balasubramanian Eyal Dassau Sten Hanke
Sunlee Bang David Davenport Aki Harma
M. Jonathan Barkley Russell Davis Jordan Hartmann
Gilberto Barrón Sushil K. Deka Kai Hassing
David Bean Ciro de la Vega Wolfgang Heck
John Bell Pedro de-las-Heras-Quiros Nathaniel Heintzman
Rudy Belliardi Jim Dello Stritto Charles Henderson
Kathryn M. Bennett Matthew d’Entremont Jun-Ho Her
Daniel Bernstein Kent Dicks Helen B. Hernandez
George A. Bertos Hyoungho Do Takashi Hibino
Chris Biernacki Alistair Donaldson
Timothy L. Hirou
Xiaolian Duan
Ola Björsne Allen Hobbs
Thomas Blackadar Brian Dubreuil Alex Holland
Marc Blanchet Sourav Dutta Arto Holopainen
Thomas Bluethner Jakob Ehrensvard Kris Holtzclaw
Douglas P. Bogia Fredrik Einberg Xinyi Hong
Xavier Boniface Michihiro Enokida Robert Hoy
Shannon Boucousis Javier Escayola Calvo Frank Hsu
Julius Broma Mark Estes Anne Huang
Lyle G. Bullock, Jr. Leonardo Estevez Sen-Der Huang
Bernard Burg Roger Feeley Ron Huby
Chris Burns Hailing Feng David Hughes
Anthony Butt Bosco T. Fernandes Robert D. Hughes
Jeremy Byford-Rew Christoph Fischer Jiyoung Huh
Satya Calloji Morten Flintrup
Hugh Hunter
Joseph W. Forler
Xiaoying Cao Hitoshi Ikeda
Carole C. Carey Russell Foster Yutaka Ikeda
Craig Carlson Eric Freudenthal Philip O. Isaacson
Santiago Carot-Nemesio Matthias Frohner Atsushi Ito
Randy W. Carroll Ken Fuchs Michael Jaffe
Simon Carter Jing Gao Praduman Jain
Seungchul Chae Qi Gao Danny Jochelson
Rahul Chauhan Marcus Garbe Phaneeth Junga
Wenjuan Chen John Garguilo Akiyoshi Kabe
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
Steve Kahle Peter Mayhew Fatemeh Saki
Tomio Kamioka Bill Saltzstein
Jim McCain
James J. Kang
László Meleg Benedikt Salzbrunn
Kei Kariya Alexander Mense Giovanna Sannino
Andy Kaschl Behnaz Minaei Jose A. Santos-Cadenas
Junzo Kashihara Jinsei Miyazaki Stefan Sauermann
Kohichi Kashiwagi Erik Moll John Sawyer
Ralph Kent Darr Moore Guillaume Schatz
Laurie M. Kermes Carsten Mueglitz Alois Schloegl
Ikuo Keshi Piotr Murawski Paul S. Schluter
Ahmad Kheirandish Soundharya Nagasubramanian Lars Schmitt
Junhyung Kim Jae-Wook Nah Mark G. Schnell
Minho Kim Alex Neefus Richard A. Schrenker
Min-Joon Kim Trong-Nghia Nguyen-Dobinsky Antonio Scorpiniti
Taekon Kim Michael E. Nidd KwangSeok Seo
Tetsuya Kimura Riccardo Serafin
Tetsu Nishimura
Alfred Kloos
Jim Niswander Sid Shaw
Jeongmee Koh
Hongliang Niu Frank Shen
Jean-Marc Koller Hiroaki Niwamoto Min Shih
Fei Kong Thomas Norgall Mazen Shihabi
John Koon Anand Noubade Redmond Shouldice
Patty Krantz Yoshiteru Nozoe Sternly K. Simon
Raymond Krasinski Abraham Ofek Marjorie Skubic
Alexander Kraus Brett Olive Robert Smith
Ramesh Krishna BegonyaOtal Ivan Soh
Geoffrey Kruse Marco Paleari Motoki Sone
Falko Kuester Charles Palmer Emily Sopensky
Rafael Lajara Bud Panjwani Rajagopalan Srinivasan
Shing C. B. Lam Carl Pantiskas Andreas Staubert
Pierre Landau Harry P. Pappas Nicholas Steblay
Jaechul Lee Hanna Park Lars Steubesand
Jong-Tae Park
JongMuk Lee John (Ivo) Stivoric
Kyong Ho Lee Myungeun Park Raymond A. Strickland
Rami Lee Soojun Park Chandrasekaran Subramaniam
Sungkee Lee Phillip E. Pash Hermanni Suominen
Woojae Lee TongBi Pei Lee Surprenant
Yonghee Lee Lucian Pestritu Ravi Swami
Joe Lenart Soren Petersen Ray Sweidan
Kathryn A. Lesh James Petisce Jin Tan
Catherine Li Peter Piction Yi Tang
Jingli Li Michael Pliskin Haruyuyki Tatsumi
Qiong Li Varshney Prabodh Isabel Tejero
Xiangchen Li Jeff Price John W. Thomas
Zhuofang Li Harald Prinzhorn Jonas Tirén
Patrick Lichter Harry Qiu Alexandra Todiruta
Jisoon Lim Arif Rahman
Janet Traub
Joon-Ho Lim Tanzilur Rahman
Gary Tschautscher
Steve Ray
John Lin Masato Tsuchid
Hongliang Niu Phillip Raymond Ken Tubman
Xiaoming Liu Terrie Reed Yoshihiro Uchida
Wei-Jung Lo Tim Reilly Akib Uddin
Charles Lowe Barry Reinhold Sunil Unadkat
Don Ludolph Brian Reinhold Fabio Urbani
Christian Luszick Melvin I. Reynolds Philipp Urbauer
Songdong Lv John G. Rhoads Laura Vanzago
Bob MacWilliams Jeffrey S. Robbins Alpo Värri
Srikkanth Madhurbootheswaran Chris Roberts Andrei Vasilateanu
Miriam L. Makhlouf Moskowitz Robert Dalimar Velez
Romain Marmot Scott M. Robertson Martha Velezis
Sandra Martinez Timothy Robertson Rudi Voon
David Rosales Barry Vornbrock
Miguel Martínez de
Gary Sagiv Isobel Walker
EsproncedaCámara
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
David Wang Kathleen Wible Qiang Yin
Jerry P. Wang Paul Williamson Done-Sik Yoo
Yao Wang Jan Wittenber Jianchao Zeng
Yi Wang Jia-Rong Wu Jason Zhang
Steve Warren Will Wykeham Zhiqiang Zhang
Fujio Watanabe Ariton Xhafa Thomas Zhao
Toru Watsuji Qifeng Yan Jia Zheng
Mike Weng Ricky Yang Miha Zoubek
Yuefeng Weng Shaoqin Ye Szymon Zyskoter
Melanie S. Yeung

The following members of the individual Standards Association balloting group voted on this standard.

Balloters may have voted for approval, disapproval, or abstention.
Bjoern Andersen Noriyuki Ikeuchi Beth Pumo
Lyle G. Bullock, Jr. Atsushi Ito
Stefan Schlichting
Keith Chow Raj Jain Janek Schumann
Malcolm Clarke Piotr Karocki Walter Struppler
David Fuschi Raymond Krasinski Oren Yuen
Randall Groves H. Moll Janusz Zalewski
Werner Hoelzl Daidi Zhong

When the IEEE SA Standards Board approved this standard on 7 November 2019, it had the following

membership:
Gary Hoffman, Chair
Ted Burse, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Masayuki Ariyoshi David J. Law Annette Reilly
Stephen D. Dukes Joseph Levy Dorothy Stanley
J. Travis Griffith Howard Li Sha Wei
Guido Hiertz Xiaohui Liu Phil Wennblom
Christel Hunter Kevin Lu Philip Winston
Joseph L. Koepfinger* Daleep Mohla Howard Wolfman
Thomas Koshy Andrew Myles Feng Wu
John D. Kulick Jingyi Zhou
*Member Emeritus
Copyright © 2019 IEEE. All rights reserved.
---------------------- Page: 14 ----------------------
oSIST prEN ISO/IEEE 11073-10408:2022
ISO/IEEE 11073-10408:2022(E)
Introduction

This introduction is not part of IEEE Std 11073-10408-2019, Health informatics—Personal health device

communication—Part 10408: Device specialization—Thermometer.

ISO/IEEE 11073 standards enable communication between medical devices and external computer

systems. This document uses the optimized framework created in IEEE Std 11073-20601 and describes a

specific, interoperable communication approach for thermometers. These standards align with and draw on

the existing clinically focused standards to provide support for communication of data from clinical or

personal health devices.
Information on references can be found in Clause 2.
Copyright © 2019 IEEE. A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.