EN 3507:2006

Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa

This standard specifies the requirements relating to:
Steel FE-PL1501 (30CrMo12)
Air melted
Hardened and tempered
Forgings
De  100 mm
930 MPa  Rm  1 080 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1501 (30CrMo12) - Lufterschmolzen - Gehärtet und angelassen - Gesenk- und Freiformschmiedestücke - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa

Diese Norm legt die Anforderungen an
Stahl FE PL1501 (30CrMo12)
Lufterschmolzen
Gehärtet und angelassen
Gesenk- und Freiformschmiedestücke
De ≤ 100 mm
930 MPa ≤Rm ≤ 1 080 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PL1501 (30CrMo12) - Élaboré à l'air - Trempé et revenu - Pièces forgées et pièces matricées - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa

Aeronavtika - Jeklo FE-PL1501 (30CrMo12) - Taljeno - Utrjeno in mehko žarjeno - Izkovki - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1080 MPa

General Information

• Status: Published
• Publication Date: 12-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 3507:2009 - Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3507:2009
01-maj-2009
$HURQDYWLND-HNOR)(3/&U0R7DOMHQR8WUMHQRLQPHKNRåDUMHQR
,]NRYNL'H”PP03D”5P”03D
$HURVSDFHVHULHV6WHHO)(3/&U0R$LUPHOWHG+DUGHQHGDQGWHPSHUHG
)RUJLQJV'H”PP03D”5P”03D
/XIWXQG5DXPIDKUW6WDKO)(30&U0R/XIWHUVFKPRO]HQ*HKlUWHWXQG
DQJHODVVHQ*HVHQNXQG)UHLIRUPVFKPLHGHVWFNH'H”PP03D”5P”
03D
6pULHDpURVSDWLDOH$FLHU)(3/&U0ReODERUpjO
DLU7UHPSpHWUHYHQX
3LqFHVIRUJpHVHWSLqFHVPDWULFpHV'H”PP03D”5P”03D
Ta slovenski standard je istoveten z: EN 3507:2006
ICS:
49.025.10 Jekla Steels
SIST EN 3507:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3507:2009

---------------------- Page: 2 ----------------------

SIST EN 3507:2009


EUROPEAN STANDARD
EN 3507

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2006
ICS 49.025.10
English Version
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted -
Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤
Rm ≤ 1 080 MPa
Série aérospatiale - Acier FE-PL1501 (30CrMo12) - Élaboré Luft- und Raumfahrt - Stahl FE-PL1501 (30CrMo12) -
à l'air - Trempé et revenu - Pièces forgées et pièces Lufterschmolzen - Gehärtet und angelassen - Gesenk und
matricées - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa Freiformschmiedestücke - De ≤ 100 mm - 930 MPa ≤ Rm ≤
1 080 MPa
This European Standard was approved by CEN on 5 October 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3507:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3507:2009
EN 3507:2006 (E)
Foreword
This document (EN 3507:2006) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at
the latest by June 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 3507:2009
EN 3507:2006 (E)
Introduction
This standard is part of the series of EN metallic material standards for aerospace applications. The general
organization of this series is described in EN 4258.
This standard has been prepared in accordance with EN 4500-5.
1 Scope
This standard specifies the requirements relating to:
Steel FE-PL1501 (30CrMo12)
Air melted
Hardened and tempered
Forgings
D ≤ 100 mm
e
930 MPa ≤ R ≤ 1 080 MPa
m
for aerospace applications.
2 Normative references
The following referenced
...