EN 1218-1:1999+A1:2009

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

This document specifies all the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single end tenoning machines with sliding table, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings.
This standard does not apply to:
a)   machines where the tenon is produced only by means of saw blades;
b)   machines where the design speed of any tool spindle exceeds 6000 min-1;
c)   machines where the average sliding table feed speed in either direction exceeds 25 m min-1 + 5%;
d)   combined machines used for tenoning (see EN 940:1997);
e)   tenoning attachments on a vertical spindle moulding machine (see EN 848-1:2007).
NOTE   Single and double end tenoning machines fed by chain or chains are dealt with in EN 1218-2. Single end tenoning machines where the tenon is produced only by means of saw blades are dealt with in EN 1218-3.
This European Standard is primarily applicable to machines which are manufactured after the date of issue of his standard.

Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 1: Einseitige Zapfenschneid- und Schlitzmaschinen mit Schiebetisch

!Dieses Dokument behandelt die in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf einseitige Zapfenschneid  und Schlitzmaschinen mit Schiebetisch zutreffen, im Folgenden als "Maschinen" bezeichnet, die konstruiert sind zum Bearbeiten von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie kunststoffbeschichtet oder mit Kunststoffkanten versehen sind."
!gestrichener Text"
Dieses Dokument gilt nicht für:
a)   Maschinen, bei denen der Schlitz und Zapfen nur durch Sägeblätter hergestellt wird;
b)   Maschinen, bei denen die konstruktiv festgelegte Drehzahl irgendeiner Werkzeugspindel über
6 000 min-1 liegt;
c)   Maschinen, bei denen die mittlere Vorschubgeschwindigkeit des Schiebetisches in irgendeiner Richtung 25 m min-1 + 5 % übersteigt;
d)   kombinierte Maschinen, die zum Zapfenschneiden und Schlitzen eingesetzt werden (siehe !EN 940:2009");
e)   die Zapfenschneid- und Schlitzeinrichtungen bei einer Tischfräsmaschine (siehe !EN 848-1:2007").
ANMERKUNG   Ein- und doppelseitige Zapfenschneid- und Schlitzmaschinen mit Kettenbandvorschub werden in !EN 1218-2" behandelt. Einseitige Zapfenschneid- und Schlitzmaschinen, bei denen der Schlitz und Zapfen nur durch Sägeblätter hergestellt wird, werden in !EN 1218-3" behandelt.
Diese Europäische Norm gilt in erster Linie für Maschinen, die nach dem Ausgabedatum dieser Norm hergestellt worden sind.

Sécurité des machines pour le travail du bois - Tenonneuses - Partie 1: Tenonneuses simples alimentées par table à rouleaux

Varnost lesnoobdelovalnih strojev - Stroji za izdelovanje čepov in utorov - 1. del: Enostranski stroji s podajalno mizo

General Information

• Status: Withdrawn
• Publication Date: 25-Aug-2009
• Withdrawal Date: 27-Apr-2021
• ICS: 79.120.10 - Woodworking machines
• Technical Committee: CEN/TC 142 - Woodworking machines - Safety
• Drafting Committee: CEN/TC 142/WG 13 - Common requirements and safety of integrated fed machines
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Apr-2021
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1218-1:2000+A1:2009 - Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

Relations

• Merged From: EN 1218-1:1999 - Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
• Effective Date: 19-Jan-2023
• Merged From: EN 1218-1:1999/prA1 - Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
• Effective Date: 27-Jun-2009
• Replaced By: EN ISO 19085-12:2021 - Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)
• Effective Date: 05-May-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 1: Einseitige Zapfenschneid- und Schlitzmaschinen mit SchiebetischSécurité des machines pour le travail du bois - Tenonneuses - Partie 1: Tenonneuses simples alimentées par table à rouleauxSafety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table79.120.10Lesnoobdelovalni strojiWoodworking machinesICS:Ta slovenski standard je istoveten z:EN 1218-1:1999+A1:2009SIST EN 1218-1:2000+A1:2009en01-oktober-2009SIST EN 1218-1:2000+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1218-1:1999+A1
August 2009 ICS 79.120.10 Supersedes EN 1218-1:1999English Version
Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
Sécurité des machines pour le travail du bois - Tenonneuses - Partie 1: Tenonneuses simples alimentées par table à rouleaux
Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 1: Einseitige Zapfenschneid- und Schlitzmaschinen mit Schiebetisch This European Standard was approved by CEN on 8 July 1999 and includes Amendment 1 approved by CEN on 23 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1218-1:1999+A1:2009: ESIST EN 1218-1:2000+A1:2009

Geometrical performance for the tool holder (spindle) (taken from
ISO 7988:1988) . 32Annex B (informative)
Examples of safety related control systems . 33Annex C (informative)
Bibliography . 37Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC" . 38Annex ZB (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 39 SIST EN 1218-1:2000+A1:2009

!EN ISO 12100-1:2003" for a description of A, B and C standards). !EN 1218 Safety of woodworking machines — Tenoning machines consists of the following parts: Part 1: Single end tenoning machines with sliding table Part 2: Double end tenoning and/or profiling machines fed by chain or chains Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers Part 4: Edge banding machines fed by chain(s) Part 5: One side profiling machines with fixed table and feed rollers or feed chain" According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
...